Lissa, Thank you for your response and support on this! We are running xCAT Version 2.6.11 (svn r11798, built Thur Mar 8 16:09 2012) on both the Management Node and the Service Node. Management Node and Service Node are running RHEL 6.1. The image install for the 'node8' is at RHEL 6.1. Both Management and Service nodes are syncing tables correctly.
I investigated the xcatmaster attribute for the node and corrected the following entry in the noderes xcat configuration table: *From: * "test","servicenode_ip,managementnode_ip","pxe",,"managementnode_ip",,,"mac","mac",,, *"managementnode_ip"*,,,,,,"0" *To:* "test","servicenode_ip,managementnode_ip","pxe",,"managementnode_ip",,,"mac","mac",,, *"servicenode_ip"*,,,,,,"0" With the xcatmaster attribute pointing to the Service Node, I ran another install for node8 'rinstall node8' and still received the same hangup when it was trying to boot as identified below and in the previous note: - The following command is run # rinstall node8 - At the console of node8, it gets its ip - mgt(management) and sn(servicenode) servers perform dhcpdiscover/dhcpoffer/dhcprequest/dhcpack for node8 - mgt server successfully transfers the rhels6.1 vmlinuz and initrd.img - At the console the "Ready ..." message is displayed and starts to load *- Then if freezes displaying the following last lines outputted:* *Initializing network drop monitor service Freeing unused kernel memory: 1232k freed Write protecting the kernel read-only data: 10240k Freeing unused kernel memory: 1112k freed Freeing unused kernel memory: 1796k freed usb 5-2: New USB device found, idVendor=04b3, idProduct=4010 usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-2: Product: RNDISKDC ETHER* Thank you again! Kindly, Mr. Blevens From: Lissa Valletta/Poughkeepsie/IBM@IBMUS > To: xCAT Users Mailing list <[email protected]>, > Cc: [email protected] > Date: 10/23/2012 07:48 AM > Subject: Re: [xcat-user] Fwd: On a Previously Working Node and Rinstall > Fails > ------------------------------ > > > > Could you give us the level of xCAT you are running? Is it the same > level on the Service node? > nodels -v will do it. > > I did notice that on your lsdef of the node8 below, your xcatmaster > attribute is the address of the management node. If you want that node > installed by the service node, then it should be the ip address of the > servicenode as known by the node. > > > Lissa K. Valletta > 2-3/T12 > Poughkeepsie, NY 12601 > (tie 293) 433-3102 > > > > [image: Inactive hide details for Jacob Blevens ---10/22/2012 03:55:34 > PM---*Background:* On a previously built x3550 M3 server with a]Jacob > Blevens ---10/22/2012 03:55:34 PM---*Background:* On a previously built > x3550 M3 server with a stateful install of RHEL 6.1 > > From: Jacob Blevens <[email protected]> > To: [email protected] > Date: 10/22/2012 03:55 PM > Subject: [xcat-user] Fwd: On a Previously Working Node and Rinstall Fails > ------------------------------ > > > * > Background:* > On a previously built x3550 M3 server with a stateful install of RHEL 6.1 > that was working fine after an IBM CET install does not work after running > 'rinstall' on the node. It is important to note that the cluster has a > management node and a servicenode. We tested 'rinstalling' the test > 'node8' with the following results: > * > The sequence of events before problem:* > - The following command is run # rinstall node8 > - At the console of node8, it gets its ip > - mgt(management) and sn(servicenode) servers perform > dhcpdiscover/dhcpoffer/dhcprequest/dhcpack for node8 > - mgt server successfully transfers the rhels6.1 vmlinuz and initrd.img > - At the console the "Ready ..." message is displayed and starts to load > - Then if freezes displaying the following last lines outputted: > > Initializing network drop monitor service > Freeing unused kernel memory: 1232k freed > Write protecting the kernel read-only data: 10240k > Freeing unused kernel memory: 1112k freed > Freeing unused kernel memory: 1796k freed > usb 5-2: New USB device found, idVendor=04b3, idProduct=4010 > usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 5-2: Product: RNDISKDC ETHER > * > At during the problem troubleshooting:* > - Can ping node8 > - Can login to the IMM through the browser > - Cannot ssh or telnet into node8 > - rcons is empty with nothing to display/no logon > * > xCAT tables:* > > #nodels node8 chain > chain.ondiscover: nodediscover > chain.chain: runcmd=bmcsetup,standby > chain.node:node8 > chain.currstate: install rhels6.1-x86_64-compute > chain.currchain: boot > chain.commments: > chain.disable: > > #lsdef node8 > Object Name: node8 > arch = x86_64 > bmc=node8-bmc > bmcport=0 > chain=runcmd=bmcsetup,standby > cons=ipmi > conserver=#.#.#.# (managements_ip) > currchain=boot > currstate=install rhels6.1-x86_64-compute > groups=rack10,test,intel,ipmi,compute > initrd=xcat/rhels6.1/x86_64/initrd.img > installnic=mac > kcmdline=nofb utf8 > ks:*http://managements_ip/install/autoinst/node8*<http://managements_ip/install/autoinst/node8> > ksdevice=#:#:#:#:#:# console=tty0 > console=tty0,115200n8r noipv6 > kernel=xcat/rhels6.1/x86_64/vmlinuz > mac=#:#:#:#:#:# > mgt=ipmi > mtm=serial## > netboot=pxe > nfsserver=managements_ip > nodetype=osi > ondiscover=nodediscover > os=rhels6.1 > postbootscripts=otherpkgs,site.post,site.gpfs > postscripts=syslog,remoteshell,syncfiles,site.hardeths,setupntp > power=ipmi > primarynic=mac > profile=compute > provmethod=install > rack=10 > serial=K###### > serialflow=hard > serialport=0 > serial speed=115200 > servicenode=servicenode_ip,managements_ip > status=installing > statustime=10-22-2012 13:00 > switch=cisco-enet01 > switchport=#/# > unit=40 > xcatmaster=managements_ip > > #tabdump nodehm > "ipmi","ipmi","ipmi",,,"managements_ip","0","115200","hard",,, > "test","ipmi","ipmi","ipmi",,,"managements_ip","0","115200","hard",,, > > #tabdump ipmi > "ipmi","/\z/-bmc/","0",,,, > > #tabdump nodetype > "test","rhels6.1","x86_64",,,, > > Any input or advice on how to resolve this issue would be greatly > appreciated! Thank you! > Mr. Blevens > > > > > > > ------------------------------------------------------------------------------ > Everyone hates slow websites. So do we. > Make your web apps faster with AppDynamics > Download AppDynamics Lite for free today:* > **http://p.sf.net/sfu/appdyn_sfd2d_oct*<http://p.sf.net/sfu/appdyn_sfd2d_oct> > _______________________________________________ > xCAT-user mailing list > [email protected]* > **https://lists.sourceforge.net/lists/listinfo/xcat-user*<https://lists.sourceforge.net/lists/listinfo/xcat-user> > > ------------------------------------------------------------------------------ > Everyone hates slow websites. So do we. > Make your web apps faster with AppDynamics > Download AppDynamics Lite for free today: > http://p.sf.net/sfu/appdyn_sfd2d_oct > _______________________________________________ > xCAT-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/xcat-user > >
<<27519691.gif>>
------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_sfd2d_oct
_______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
