xCAT version 2.7.5 P7-IH Linux RHEL 6.2 I recently rflash'd to all my frames a new power code firmware level (118). Various xCAT commands (like rinv) do not report that 118 is the active level. They are showing a 2-revs-ago level (092) as the active level. Although, if I dig down to a slightly lower level and run the lslic command from the HMC, it shows 118 as the active level. I was told that this is a bug in xCAT, ie. xCAT does not report the correct active firmware level.
Unfortunately, because of this, when I try to rflash a new firmware out to my CECs, the rflash command fails with the following output: f01c03: New Managed System level for f01c03 is not compatible with current Power Subsystem level 02AP730_092 on frame01. Power Subsystem level 02AP730_116 or later is required. The rflash is erroneously seeing the frame's power level as 092, rather than the correct 118, and thus is terminating because it doesn't see a frame power level of 116+. How do I get around this? How can I force rflash to do the CEC firmware update and not worry about the frame's firmware level? Thanks for any help you can provide. David Smith ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_nov _______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user
