Hello,

I am trying to use xCAT to install x220 blades in a Flex Chassis. I have 
defined the cmm and can login passwordless on it. I tried lsslp 
--flexdiscover and it discovered nothing (this might be due to the fact 
that the switchs have been reconfigured with no vlan 1, but it is a 
customer requirement).

I am ready to do it manualy. How do I find the ipmi.bmcid of each blade ?

I have entered one blade in the ipmi table to associate the imm ipname to 
the blade nodename, in that case, when I try rinv blade, I get a password 
error message even though the bmcuser and bmcpassword are correct, if I do 
ssh USERID@blade-imm and enter the bmcpassword I do log to the imm of the 
blade.

If I don't enter the blade in the ipmi table, I get a timeout response.

I am not sure I have a blade entry in xCAT table passwd.

Can you please describe the entries I have to complete to get rpower and 
rinv to work ? Or give me a pointer to an existing document ?

Thank you for your help.

Best regards,



Antoine Tabary
 17 Avenue De L'europe

Certified HPC I/T Specialist
 Bois Colombes Cedex, 92275
6520AA
 France
ITS
 



 



 

e-mail:
[email protected]
 


 
 


__________________

 
Discovery appears to work, the mac is discovered, the DHCP entry is 
created, and the genesis dhclient gets the new MAC address, but then it 
keeps looping in discovery, with the console displaying an ?unrecognized 
directive <error>unknown? message.   If I run: ?chdef labcm0005 
curstate=<some state other than discover>?, then discovery ends.   The 
only thing that?s changed is that since 2.8.0, whe?re no longer using 
?nodeset host discover?, but setting the chain manually.
 
Thanks
 
Details:
 
We used to be able to run the following to initiate node discovery before 
2.8.0:
 
rmnodecfg host
nodeset host discover
 
(BTW: the rmnodecfg should delete the dhcp entry BEFORE deleting the MAC 
address from the xCAT table.   Here?s a diff to make it work.)
[root@drdkvm0003 bin]# diff rmnodecfg.old rmnodecfg.new
33c33
<   $cmd = "chtab -d node=$blade mac";
---
>   $cmd = "makedhcp -d $blade";
36c36
<   $cmd = "makedhcp -d $blade";
---
>   $cmd = "chtab -d node=$blade mac";
 
Now ?nodeset ? discover? provides the error:
 
[root@drdkvm0003 xcat]# nodeset labcm0005 discover
Error: Unknown state discover requested
 
If the chain is set up manually as follows, discovery starts to happen, 
and seems to work, but never ends:
 
[root@drdkvm0003 xcat]# chdef labcm0005 
chain="discover,runcmd=bmcsetup,install,boot" ondiscover=nodediscover
 
The  discovery process initiates, the node gets a dynamic address and 
communicates back, the mac address is discovered, a correct DHCP lease is 
created, and it gets its assigned IP and hostname (not dynamic.).   
However it never recognizes that discovery was successful and complains 
about ?Unrecognised directive?
 
Here?s the console output:
 
Aquiring network addresses..Aquired IPv4 address on eth0: 149.77.53.153/23 
(this is a dynamic address)
 
Beginning node discovery process
No link detected on eth1
Waiting on nics to get addresses
eth0|149.77.53.153
Network configuration complete, commencing transmit of discovery packets
Done waiting
 
/bin/doxcat: line 178: 684 Terminated       dhclient -6 ?pf 
/var/run/dhclient6.$bootnic.pid $bootnic ?lf /var/lib/dhclient6.leases
/bin/doxcat: line 178: 684 Terminated       dhclient -cf 
/var/run/dhclient.conf -6 ?pf /var/run/dhclient6.$nic.pid ?lf 
var/lib/dhclient/dhclient6.leases $nic
 
^\/bin/getdestiny: line 25: 3260 Quit           sleep 1
^\/bin/getdestiny: line 25: 3266 Quit           sleep 1
Retrying in 16 seconds
?
Done waiting
 
 
Unrecognised directive <error>Unknown
 
Beginning node discovery process
No link detected on eth1
Waiting for nics to get addresses
eth0|149.77.53.205   (this is the correct, discovered address, not 
dynamic.)
Network configuration complete, commencing transmit of discovery packets
Done waiting
? keeps repeating ?
 
The system log is below.   The key data is:
 
Labcm0005 ? node being discovered
149.77.53.153 ? dynamic address assigned
149.77.53.205 ? permanent IP address
00:25:90:a2:9f:54 ? MAC address of eth0
 
Mar 27 08:21:58 labcm0005 kernel: usb 2-1.1: USB disconnect, device number 
61
Mar 27 08:21:58 labcm0005 kernel: usb 2-1.1: new high speed USB device 
number 62 using ehci_hcd
Mar 27 08:21:58 labcm0005 kernel: usb 2-1.1: New USB device found, 
idVendor=03eb, idProduct=0002
Mar 27 08:21:58 labcm0005 kernel: usb 2-1.1: New USB device strings: 
Mfr=1, Product=2, SerialNumber=3
Mar 27 08:21:58 labcm0005 kernel: usb 2-1.1: Product: anton2_bc
Mar 27 08:21:58 labcm0005 kernel: usb 2-1.1: Manufacturer: desres
Mar 27 08:21:58 labcm0005 kernel: usb 2-1.1: SerialNumber: cage0-slot0
Mar 27 08:29:23 drdkvm0003 xCAT: xCAT: Allowing lsdef labcm0005 for root 
from localhost.localdomain
Mar 27 08:29:50 drdkvm0003 xCAT: xCAT: Allowing nodels to labcm0005 for 
root from localhost.localdomain
Mar 27 08:29:53 drdkvm0003 xCAT: xCAT: Allowing makedhcp to labcm0005 -d 
for root from localhost.localdomain
Mar 27 08:29:53 drdkvm0003 dhcpd: Wrote 0 class decls to leases file.
Mar 27 08:29:53 drdkvm0003 dhcpd: Wrote 0 deleted host decls to leases 
file.
Mar 27 08:29:53 drdkvm0003 dhcpd: Wrote 0 new dynamic host decls to leases 
file.
Mar 27 08:29:53 drdkvm0003 dhcpd: Wrote 20 leases to leases file.
Mar 27 08:30:14 drdkvm0003 xCAT: xCAT: Allowing nodeset to labcm0005 
discover for root from localhost.localdomain
Mar 27 08:32:38 drdkvm0003 xCAT: xCAT: Allowing chdef labcm0005 
chain=discover,runcmd=bmcsetup,install,boot ondiscover=nodediscover for 
root from localhost.localdomain
Mar 27 08:33:51 drdkvm0003 xCAT: xCAT: Allowing rsetboot to labcm0005 net 
for root from localhost.localdomain
Mar 27 08:34:01 drdkvm0003 xCAT: xCAT: Allowing rpower to labcm0005 status 
for root from localhost.localdomain
Mar 27 08:34:06 drdkvm0003 xCAT: xCAT: Allowing rpower to labcm0005 boot 
for root from localhost.localdomain
 
<test node just rebooted ? discovery begins>
 
Mar 27 08:34:50 drdkvm0003 dhcpd: DHCPDISCOVER from 00:25:90:a2:9f:54 via 
eth0
Mar 27 08:34:51 drdkvm0003 dhcpd: DHCPOFFER on 149.77.53.152 to 
00:25:90:a2:9f:54 via eth0
Mar 27 08:34:52 drdkvm0003 dhcpd: DHCPREQUEST for 149.77.53.152 
(149.77.53.252) from 00:25:90:a2:9f:54 via eth0
Mar 27 08:34:52 drdkvm0003 dhcpd: DHCPACK on 149.77.53.152 to 
00:25:90:a2:9f:54 via eth0
Mar 27 08:34:52 drdkvm0003 xinetd[5682]: START: tftp pid=29586 
from=149.77.53.152
Mar 27 08:34:52 drdkvm0003 in.tftpd[29587]: RRQ from 149.77.53.152 
filename xcat/xnba.kpxe
Mar 27 08:34:52 drdkvm0003 in.tftpd[29587]: tftp: client does not accept 
options
Mar 27 08:34:52 drdkvm0003 in.tftpd[29588]: RRQ from 149.77.53.152 
filename xcat/xnba.kpxe
Mar 27 08:34:52 drdkvm0003 dhcpd: DHCPDISCOVER from 00:25:90:a2:9f:54 via 
eth0
Mar 27 08:34:52 drdkvm0003 dhcpd: DHCPOFFER on 149.77.53.152 to 
00:25:90:a2:9f:54 via eth0
Mar 27 08:34:52 drdkvm0003 dhcpd: DHCPREQUEST for 149.77.53.152 
(149.77.53.252) from 00:25:90:a2:9f:54 via eth0
Mar 27 08:34:52 drdkvm0003 dhcpd: DHCPACK on 149.77.53.152 to 
00:25:90:a2:9f:54 via eth0
Mar 27 08:35:03 drdkvm0003 dhcpd: DHCPDISCOVER from 00:25:90:a2:9f:54 via 
eth0
Mar 27 08:35:04 drdkvm0003 dhcpd: DHCPOFFER on 149.77.53.153 to 
00:25:90:a2:9f:54 via eth0
Mar 27 08:35:04 drdkvm0003 dhcpd: DHCPREQUEST for 149.77.53.153 
(149.77.53.252) from 00:25:90:a2:9f:54 via eth0
Mar 27 08:35:04 drdkvm0003 dhcpd: DHCPACK on 149.77.53.153 to 
00:25:90:a2:9f:54 via eth0
Mar 27 08:35:04 drdkvm0003 xCAT: xCAT: Allowing getcredentials x509cert 
from drdn0026
Mar 27 08:35:16 drdkvm0003 xCAT: xcatd: Processing discovery request from 
149.77.53.153
Mar 27 08:35:19 drdkvm0003 xCAT node discovery: labcm0005 has been 
discovered
Mar 27 08:35:21 drdkvm0003 dhcpd: DHCPRELEASE of 149.77.53.153 from 
00:25:90:a2:9f:54 via eth0 (found)
Mar 27 08:35:25 drdkvm0003 dhcpd: DHCPDISCOVER from 00:25:90:a2:9f:54 via 
eth0
Mar 27 08:35:25 drdkvm0003 dhcpd: DHCPOFFER on 149.77.53.205 to 
00:25:90:a2:9f:54 via eth0
Mar 27 08:35:25 drdkvm0003 dhcpd: DHCPREQUEST for 149.77.53.205 
(149.77.53.252) from 00:25:90:a2:9f:54 via eth0
Mar 27 08:35:25 drdkvm0003 dhcpd: DHCPACK on 149.77.53.205 to 
00:25:90:a2:9f:54 via eth0
Mar 27 08:35:41 drdkvm0003 xCAT: xCAT: Allowing getcredentials x509cert 
from labcm0005
 
<discovery restarts!>
 
Mar 27 08:39:35 drdkvm0003 xCAT: xcatd: Processing discovery request from 
149.77.53.205
Mar 27 08:39:36 drdkvm0003 xCAT node discovery: labcm0005 has been 
discovered
Mar 27 08:39:40 drdkvm0003 dhcpd: DHCPRELEASE of 149.77.53.205 from 
00:25:90:a2:9f:54 via eth0 (not found)
Mar 27 08:39:43 drdkvm0003 dhcpd: DHCPDISCOVER from 00:25:90:a2:9f:54 via 
eth0
Mar 27 08:39:43 drdkvm0003 dhcpd: DHCPOFFER on 149.77.53.205 to 
00:25:90:a2:9f:54 via eth0
Mar 27 08:39:43 drdkvm0003 dhcpd: DHCPREQUEST for 149.77.53.205 
(149.77.53.252) from 00:25:90:a2:9f:54 via eth0
Mar 27 08:39:43 drdkvm0003 dhcpd: DHCPACK on 149.77.53.205 to 
00:25:90:a2:9f:54 via eth0
Mar 27 08:40:00 drdkvm0003 xCAT: xCAT: Allowing getcredentials x509cert 
from labcm0005
 
<discovery restarts!>
 
Mar 27 08:44:07 drdkvm0003 xCAT: xcatd: Processing discovery request from 
149.77.53.205
Mar 27 08:44:09 drdkvm0003 xCAT node discovery: labcm0005 has been 
discovered
Mar 27 08:44:12 drdkvm0003 dhcpd: DHCPRELEASE of 149.77.53.205 from 
00:25:90:a2:9f:54 via eth0 (not found)
Mar 27 08:44:12 drdkvm0003 dhcpd: DHCPDISCOVER from 00:25:90:a2:9f:54 via 
eth0
Mar 27 08:44:12 drdkvm0003 dhcpd: DHCPOFFER on 149.77.53.205 to 
00:25:90:a2:9f:54 via eth0
Mar 27 08:44:12 drdkvm0003 dhcpd: DHCPREQUEST for 149.77.53.205 
(149.77.53.252) from 00:25:90:a2:9f:54 via eth0
Mar 27 08:44:12 drdkvm0003 dhcpd: DHCPACK on 149.77.53.205 to 
00:25:90:a2:9f:54 via eth0
Mar 27 08:44:32 drdkvm0003 xCAT: xCAT: Allowing getcredentials x509cert 
from labcm0005
 
<discovery restarts!>
 
Mar 27 08:46:54 drdkvm0003 xCAT: xcatd: Processing discovery request from 
149.77.53.205
 
Here?s the current state of the chain and mac tables:
 
[root@drdkvm0003 bin]# nodels labcm0005 chain
labcm0005: chain.ondiscover: nodediscover
labcm0005: chain.chain: discover,runcmd=bmcsetup,install,boot
labcm0005: chain.node: labcm0005
labcm0005: chain.currstate: discover
labcm0005: chain.currchain: runcmd=bmcsetup,install,boot
labcm0005: chain.comments: 
labcm0005: chain.disable: 
 
[root@drdkvm0003 bin]# nodels labcm0005 mac
labcm0005: mac.interface: eth0
labcm0005: mac.node: labcm0005
labcm0005: mac.mac: 00:25:90:a2:9f:54!labcm0005.nyc.desres.deshaw.com
labcm0005: mac.comments: 
labcm0005: mac.disable:
 
 
Thanks
  
------------------------------------------------------------------------------
Own the Future-Intel&reg; Level Up Game Demo Contest 2013
Rise to greatness in Intel's independent game demo contest.
Compete for recognition, cash, and the chance to get your game
on Steam. $5K grand prize plus 10 genre and skill prizes.
Submit your demo by 6/6/13. http://p.sf.net/sfu/intel_levelupd2d
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user


Sauf indication contraire ci-dessus:/ Unless stated otherwise above:
Compagnie IBM France
Siège Social : 17 avenue de l'Europe, 92275 Bois-Colombes Cedex
RCS Nanterre 552 118 465
Forme Sociale : S.A.S.
Capital Social : 653.242.306,20 ?
SIREN/SIRET : 552 118 465 03644 - Code NAF 6202A 

<<image/gif>>

------------------------------------------------------------------------------
Own the Future-Intel&reg; Level Up Game Demo Contest 2013
Rise to greatness in Intel's independent game demo contest.
Compete for recognition, cash, and the chance to get your game 
on Steam. $5K grand prize plus 10 genre and skill prizes. 
Submit your demo by 6/6/13. http://p.sf.net/sfu/intel_levelupd2d
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user

Reply via email to