It's configured as mentioned (nodeset
<n1> osimage etc, and using the old postscripts which have
worked in the past.
The issue doesn't even get that far, as:
# lsdef -t osimage <imagename>
postscripts=<all the postscripts I want to run>
but after nodeset n1 osimage=<imagename>
postscripts=<only xcatdefaults>
so xCAT isn't even trying to run the postscripts.
Regards,
Nathan
Nathan Harper
CFMS IT Systems Architect
07875510891
01179061104
On 08/15/2013 01:06 PM, Lissa Valletta wrote:
When you run nodeset do you
use nodeset <n1> osimage=<your imagename>
Are the postscripts in
/install/postscripts and are world readable and executable.
Is your node's
provmethod=<your imagename>
Go on the node and look in
/xcatpost/mypostscript file. Is you postscript in the list
at the bottom.
If the setup above it correct,
the try
updatenode <n1> -V -P
and see if your postscript is run.
In verbose mode you will see
each postscript as it is run.
Lissa K. Valletta
8-3/B10
Poughkeepsie, NY 12601
(tie 293) 433-3102
 Nathan Harper ---08/15/2013
05:22:28 AM---Hi, I've got a couple of machines running xCAT
2.7.6 on iDataPlex, and I'm
From: Nathan Harper
<[email protected]>
To: xCAT Users Mailing list
<[email protected]>,
Date: 08/15/2013 05:22 AM
Subject: [xcat-user] osimage provisioning
and postscripts
Hi,
I've got a couple of machines running xCAT 2.7.6 on iDataPlex,
and I'm
moving to osimage provisioning for new images.
I've configured the osimage definitions, including
postscripts/postbootscripts - they appear under lsdef -t
osimage
<imagename>. However, when I nodeset a node which was
previously
provisioned under the old method, the install works, but the
postscripts
aren't applied, and its only picking up the xcatdefaults.
Is there something that I'm missing, some old bit of config
which is
overriding it?
--
Regards,
Nathan
Nathan Harper
CFMS IT Systems Architect
07875510891
01179061104
------------------------------------------------------------------------------
Get 100% visibility into Java/.NET code with AppDynamics Lite!
It's a free troubleshooting tool designed for production.
Get down to code-level detail for bottlenecks, with <2%
overhead.
Download for free and get started troubleshooting in minutes.
http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
|
------------------------------------------------------------------------------
Get 100% visibility into Java/.NET code with AppDynamics Lite!
It's a free troubleshooting tool designed for production.
Get down to code-level detail for bottlenecks, with <2% overhead.
Download for free and get started troubleshooting in minutes.
http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
