Could you give me the full lsdef of the node and the lsdef of the osimage? I did try it on 2.7.7 and it worked. There was only one change in that code for 2.7.7 in defect https://sourceforge.net/p/xcat/bugs/3412/ but that was not a fix for your problem.
Lissa K. Valletta 8-3/B10 Poughkeepsie, NY 12601 (tie 293) 433-3102 From: Nathan Harper <[email protected]> To: <[email protected]>, Date: 08/15/2013 11:58 AM Subject: Re: [xcat-user] osimage provisioning and postscripts ok, that makes sense. However, it still seems to be ignoring the postscripts applied to the osimage. It's definitely only running the xcatdefaults postscripts, both during install and updatenode -V -P. The scripts don't appear in /xcatpost/mypostscript either. Regards, Nathan Nathan Harper CFMS IT Systems Architect 07875510891 01179061104 On 08/15/2013 03:58 PM, Lissa Valletta wrote: You will not see them listed on the lsdef of the node. Only on the lsdef of the image. That would be an interesting enhancement though. Lissa K. Valletta 8-3/B10 Poughkeepsie, NY 12601 (tie 293) 433-3102 Inactive hide details for Nathan Harper ---08/15/2013 09:11:57 AM---after reading that, I still wasn't clear: # lsdef -t osimagNathan Harper ---08/15/2013 09:11:57 AM---after reading that, I still wasn't clear: # lsdef -t osimage <imagename> From: Nathan Harper <[email protected]> To: <[email protected]>, Date: 08/15/2013 09:11 AM Subject: Re: [xcat-user] osimage provisioning and postscripts after reading that, I still wasn't clear: # lsdef -t osimage <imagename> postscripts=<all the postscripts I want to run> but after #nodeset n1 osimage=<imagename> #lsdef n1 postscripts=<only xcatdefaults> Regards, Nathan Nathan Harper CFMS IT Systems Architect 07875510891 01179061104 On 08/15/2013 01:46 PM, Nathan Harper wrote: It's configured as mentioned (nodeset <n1> osimage etc, and using the old postscripts which have worked in the past. The issue doesn't even get that far, as: # lsdef -t osimage <imagename> postscripts=<all the postscripts I want to run> but after nodeset n1 osimage=<imagename> postscripts=<only xcatdefaults> so xCAT isn't even trying to run the postscripts. Regards, Nathan Nathan Harper CFMS IT Systems Architect 07875510891 01179061104 On 08/15/2013 01:06 PM, Lissa Valletta wrote: When you run nodeset do you use nodeset <n1> osimage=<your imagename> Are the postscripts in /install/postscripts and are world readable and executable. Is your node's provmethod=<your imagename> Go on the node and look in /xcatpost/mypostscript file. Is you postscript in the list at the bottom. If the setup above it correct, the try updatenode <n1> -V -P and see if your postscript is run. In verbose mode you will see each postscript as it is run. Lissa K. Valletta 8-3/B10 Poughkeepsie, NY 12601 (tie 293) 433-3102 Inactive hide details for Nathan Harper ---08/15/2013 05:22:28 AM---Hi, I've got a couple of machines running xCAT 2.7.6 on iDaNathan Harper ---08/15/2013 05:22:28 AM---Hi, I've got a couple of machines running xCAT 2.7.6 on iDataPlex, and I'm From: Nathan Harper <[email protected]> To: xCAT Users Mailing list <[email protected]>, Date: 08/15/2013 05:22 AM Subject: [xcat-user] osimage provisioning and postscripts Hi, I've got a couple of machines running xCAT 2.7.6 on iDataPlex, and I'm moving to osimage provisioning for new images. I've configured the osimage definitions, including postscripts/postbootscripts - they appear under lsdef -t osimage <imagename>. However, when I nodeset a node which was previously provisioned under the old method, the install works, but the postscripts aren't applied, and its only picking up the xcatdefaults. Is there something that I'm missing, some old bit of config which is overriding it? -- Regards, Nathan Nathan Harper CFMS IT Systems Architect 07875510891 01179061104 ------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite! It's a free troubleshooting tool designed for production. Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user ------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite! It's a free troubleshooting tool designed for production. Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user ------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite! It's a free troubleshooting tool designed for production. Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
<<inline: graycol.gif>>
------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite! It's a free troubleshooting tool designed for production. Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk
_______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
