If you are using local xcat-dep to install, get into dir xcat-dep/SL6/x86_64 and run 'ln -s ../../rh6/perl-Net-Telnet-3.03-1.2.noarch.rpm perl-Net-Telnet-3.03-1.2.noarch.rpm' to link the rpm from rh6. Then run createrepo to recreate repo for the dependency of SL6.
If you are using the internet source, you have to install the rpm by
yourself.
And in any case, please update me your progress so I could know how to fix
it.
Thanks
Best Regards
----------------------------------------------------------------------
Wang Xiaopeng (王晓朋)
IBM China System Technology Laboratory
Tel: 86-10-82453455
Email: w...@cn.ibm.com
Address: 28,ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road,
Haidian District Beijing P.R.China 100193
From: Wojciech Turek <woj...@gmail.com>
To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net>,
Date: 2013/10/16 20:42
Subject: Re: [xcat-user] rpower command not working
Hi Xiao
I was exactly doing this when I got your message ;-)
So it looks like the culprit is the missing Telnet.pm module. Shouldn't
this be installed as part of the xCAT-dep installation ?
perl -c ipmi.pm
"my" variable @flist masks earlier declaration in same scope
at /opt/xcat/lib/perl/xCAT/InstUtils.pm line 1026.
Possible attempt to separate words with commas
at /opt/xcat/lib/perl/xCAT_monitoring/montbhandler.pm line 57.
Possible attempt to separate words with commas
at /opt/xcat/lib/perl/xCAT_monitoring/montbhandler.pm line 57.
Can't locate Net/Telnet.pm in @INC (@INC
contains: /opt/xcat/lib/perl /usr/opt/perl5/lib/site_perl/5.8.2
/usr/opt/perl5/lib/site_perl/5.8.2/aix-thread-multi /usr/opt/perl5/lib/5.8.2
/usr/opt/perl5/lib/5.8.2/aix-thread-multi /usr/local/lib64/perl5
/usr/local/share/perl5 /usr/lib64/perl5/vendor_perl
/usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5 .)
at /opt/xcat/lib/perl/xCAT/SSHInteract.pm line 3.
BEGIN failed--compilation aborted at /opt/xcat/lib/perl/xCAT/SSHInteract.pm
line 3.
Compilation failed in require at /opt/xcat/lib/perl/xCAT/IMMUtils.pm line
3.
BEGIN failed--compilation aborted at /opt/xcat/lib/perl/xCAT/IMMUtils.pm
line 3.
Compilation failed in require at ipmi.pm line 26.
BEGIN failed--compilation aborted at ipmi.pm line 26.
On 16 October 2013 13:31, Xiao Peng Wang <w...@cn.ibm.com> wrote:
Could you run following command to check the syntax of the pm?
perl -I /opt/xcat/lib/perl/ -c /opt/xcat/lib/perl/xCAT_plugin/blade.pm
Thanks
Best Regards
----------------------------------------------------------------------
Wang Xiaopeng (王晓朋)
IBM China System Technology Laboratory
Tel: 86-10-82453455
Email: w...@cn.ibm.com
Address: 28,ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road,
Haidian District Beijing P.R.China 100193
Inactive hide details for Wojciech Turek ---2013/10/16 20:13:24---Hi
Xiao, Spot on!Wojciech Turek ---2013/10/16 20:13:24---Hi Xiao, Spot on!
From: Wojciech Turek <woj...@gmail.com>
To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net>,
Date: 2013/10/16 20:13
Subject: Re: [xcat-user] rpower command not working
Hi Xiao,
Spot on!
xcatd -f
Error loading module /opt/xcat/lib/perl/xCAT_plugin/blade.pm ...skipping
Error loading module /opt/xcat/lib/perl/xCAT_plugin/bmcconfig.pm
...skipping
Error loading module /opt/xcat/lib/perl/xCAT_plugin/ipmi.pm ...skipping
Error loading module /opt/xcat/lib/perl/xCAT_plugin/lsslp.pm ...skipping
Error loading module /opt/xcat/lib/perl/xCAT_plugin/remoteimmsetup.pm
...skipping
Error loading module /opt/xcat/lib/perl/xCAT_plugin/slpdiscover.pm
...skipping
Now why this would happen or a better question how to fix this?
best regards,
W
On 16 October 2013 13:05, Xiao Peng Wang <w...@cn.ibm.com> wrote:
Is that possible your ipmi.pm was not loaded successful? Try to
'service xcatd stop' and run 'xcatd -f' to see whether there's any
error message?
Thanks
Best Regards
----------------------------------------------------------------------
Wang Xiaopeng (王晓朋)
IBM China System Technology Laboratory
Tel: 86-10-82453455
Email: w...@cn.ibm.com
Address: 28,ZhongGuanCun Software Park,No.8 Dong Bei Wang West
Road, Haidian District Beijing P.R.China 100193
Inactive hide details for Wojciech Turek ---2013/10/16 18:17:13---I
installed latest xcat 8.2 on the machine running SL6.4 and Wojciech
Turek ---2013/10/16 18:17:13---I installed latest xcat 8.2 on the
machine running SL6.4 and I have a problem with rpower command n
From: Wojciech Turek <woj...@gmail.com>
To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net>,
Date: 2013/10/16 18:17
Subject: [xcat-user] rpower command not working
I installed latest xcat 8.2 on the machine running SL6.4 and I have
a problem with rpower command not working.
rpower rr-sand12 status
rr-sand12: Error: Unable to identify plugin for this command, check
relevant tables: nodehm.power,mgt;nodehm.mgt
My nodehm table looks like this:
tabdump nodehm
#node,power,mgt,cons,termserver,termport,conserver,serialport,serialspeed,serialflow,getmac,cmdmapping,comments,disable
"rr-sand12",,"ipmi","ipmi",,,,"1","115200","hard",,,,
You have new mail in /var/spool/mail/root
tabdump ipmi
#node,bmc,bmcport,taggedvlan,bmcid,username,password,comments,disable
"rr-sand12","10.45.1.12",,"root","secret",,,,
lsdef rr-sand12
Object name: rr-sand12
arch=x86_64
bmc=10.45.1.12
cons=ipmi
currstate=statelite SL6.x-x86_64-compute
groups=all,compute,nodes
hostnames=rr-sand12.xcat.cluster
initrd=xcat/netboot/SL6.x/x86_64/compute//initrd-statelite.gz
ip=10.43.1.12
kcmdline=root=nfs:10.43.255.254:/install/netboot/SL6.x/x86_64/compute/rootimg:ro
STATEMNT=10.43.255.254:/state XCAT=!myipfn!:3001 console=tty0
console=ttyS1,115200n8r MNTOPTS=
kernel=xcat/netboot/SL6.x/x86_64/compute//kernel
mac=b8:ca:3a:61:5b:80
mgt=ipmi
netboot=pxe
nfsserver=10.43.255.254
nodetype=osi
os=SL6.x
postbootscripts=otherpkgs
postscripts=syslog,remoteshell,syncfiles
primarynic=mac
profile=compute
provmethod=statelite
serial=42LVCKL
serialflow=hard
serialport=1
serialspeed=115200
status=standingby
statustime=10-15-2013 16:32:24
supportedarchs=x86,x86_64
switch=ethsw1
switchport=gi1/0/12
tftpserver=10.43.255.254
rpm -qa | grep -i xcat
conserver-xcat-8.1.16-10.x86_64
xCAT-buildkit-2.8.2-snap201307222332.noarch
xCAT-client-2.8.2-snap201307222328.noarch
ipmitool-xcat-1.8.11-3.x86_64
xCAT-2.8.2-snap201307222333.x86_64
perl-xCAT-2.8.2-snap201307222328.noarch
elilo-xcat-3.14-4.noarch
xCAT-genesis-scripts-x86_64-2.8.2-snap201307222333.noarch
xCAT-server-2.8.2-snap201307222328.noarch
xCAT-genesis-base-x86_64-2.8-snap201308090229.noarch
syslinux-xcat-3.86-2.noarch
--
--
Wojciech Turek
------------------------------------------------------------------------------
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application
performance.
Explore tips for MPI, OpenMP, advanced profiling, and more. Get the
most from
the latest Intel processors and coprocessors. See abstracts and
register >
http://pubads.g.doubleclick.net/gampad/clk?id=60135031&iu=/4140/ostg.clktrk
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application
performance.
Explore tips for MPI, OpenMP, advanced profiling, and more. Get the
most from
the latest Intel processors and coprocessors. See abstracts and
register >
http://pubads.g.doubleclick.net/gampad/clk?id=60135031&iu=/4140/ostg.clktrk
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
--
Wojciech Turek
<< Tomorrow (noun) A mystical land where 99% of all human productivity,
motivation and achievement is stored >>
------------------------------------------------------------------------------
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance.
Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most
from
the latest Intel processors and coprocessors. See abstracts and register
>
http://pubads.g.doubleclick.net/gampad/clk?id=60135031&iu=/4140/ostg.clktrk
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance.
Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most
from
the latest Intel processors and coprocessors. See abstracts and register
>
http://pubads.g.doubleclick.net/gampad/clk?id=60135031&iu=/4140/ostg.clktrk
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance.
Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most
from
the latest Intel processors and coprocessors. See abstracts and register >
http://pubads.g.doubleclick.net/gampad/clk?id=60135031&iu=/4140/ostg.clktrk
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
<<inline: graycol.gif>>
------------------------------------------------------------------------------ October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register > http://pubads.g.doubleclick.net/gampad/clk?id=60135031&iu=/4140/ostg.clktrk
_______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user
