On 15/10/14 18:06, Fabio Moreira wrote:
>
> Hi,
>
> I'm facing a problem while installing a server with an onboard Intel 
> SATA controller (*SATA controller: Intel Corporation C600/X79 series 
> chipset 6-Port SATA AHCI Controller (rev 06)*) when configured with 
> RAID1 through this controller (Hardware RAID). This controller sets 
> the RAID disks as /dev/md127 and the partitions as /dev/md127p1, 
> /dev/md127p2 and /dev/md127p3 for instance.
>
> Since the devices are not the standard /dev/sdX, I'm not able to 
> install. Is there any hint?
>
> Thanks in advance!
>
> Fabio Souza
Hi Fabio,

It depends on the template you are using, you can customise this however 
you want. By default it will use sd* device, But you can specify your 
own partition file with the osimage, for example for redhat based 
machines I tend to do, the below, with filename such as 
/install/templates/compute/compute.partfile, and then can specify the 
partition file as "chdef -t osimage my-osimage 
partitionfile=/install/templates/compute/compute.partfile". In my 
instance I have not specified the disk, but you should easily be able to 
use the "--ondisk=" paramater for any of the part commands in the 
kickstart file.

#############
part /boot --fstype=ext4 --size=1024
part /boot/efi --fstype=vfat --size=100
part pv.1 --grow --size=1

volgroup system --pesize=4096 pv.1

logvol / --fstype=ext4 --name=root --vgname=system --size=20480
logvol swap --name=swap --vgname=system --size=8192
logvol /var --fstype=ext4 --name=var --vgname=system --size=40960
#############

I hope that makes sense

Arif Ali

IRC: arif-ali at freenode
LinkedIn: http://uk.linkedin.com/in/arifali


------------------------------------------------------------------------------
Comprehensive Server Monitoring with Site24x7.
Monitor 10 servers for $9/Month.
Get alerted through email, SMS, voice calls or mobile push notifications.
Take corrective actions from your mobile device.
http://p.sf.net/sfu/Zoho
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user

Reply via email to