I have the following problem when I try to provision. I used to be able to
do this, but I managed to zap some xCAT tables and am starting from scratch
again.
Thanks.
sl11d130: Adding a disk to SL11D130's directory entry... Done
sl11d130: Adding 3390 disk for sl11d130 as 100 ... Done
Operating system for sl11d130 set
sl11d130: Searching for acceptable network device
sl11d130: Setting up networking on XCATVSW2 (layer:2 | DHCP:0)
sl11d130: (Error) Missing network information
sl11d130: (Solution) Specify the mask, gateway, and nameservers for the
subnet in the networks table
netname netmask mgtifname gateway dhcpserver tftpserver
nameserversntpserverslogserversdynamicrangestaticrangestaticrangeincrementnodehostnameddnsdomainvlaniddomaincommentsdisabl
10_10_10_0-255_255_255_0 10.10.10.0 255.255.255.0 eth1
10.10.10.10
172_17_50_0-255_255_254_0 172.17.50.0 255.255.254.0 eth0 172.17.50.1
172.17.51.121
Showing 1 to 2 of 2 entries
USER SL11D130 XCAT 2G 2G G
INCLUDE SUSE
CPU 00
MACHINE ESA
CONSOLE 0009 3215 T
NICDEF 0A00 TYPE QDIO LAN SYSTEM XCATVSW2 MACID FFFFED
SPOOL 000C 2540 READER *
SPOOL 000D 2540 PUNCH A
SPOOL 000E 1403 A
MDISK 0100 3390 1 5000 XCLX08 MR ALL ALL ALL
PROFILE SUSE
COMMAND SET VSWITCH XCATVSW2 GRANT &USERID
COMMAND COUPLE 0A00 TO SYSTEM XCATVSW2
COMMAND SET OBSERVER OPERATOR
CPU 00
IPL CMS PARM AUTOCR
MACH ESA 2
OPTION APPLMON
Reply
Forward
------------------------------------------------------------------------------
Dive into the World of Parallel Programming. The Go Parallel Website,
sponsored by Intel and developed in partnership with Slashdot Media, is your
hub for all things parallel software development, from weekly thought
leadership blogs to news, videos, case studies, tutorials and more. Take a
look and join the conversation now. http://goparallel.sourceforge.net/
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
