What version of xCAT are you using? Are there service nodes involved?
Which network are planing to use for deploying the nodes, 10 or 172? 
Did you run makedhcp -n and makeshcp -a? 
Have you put the node's ip in /etc/hosts?
Did you run makedns?
Can you show us the output of lsdef <node>?

Thanks,

Ling Gao
Poughkeepsie Unix Development Lab
IBM Systems and Technology Group
Internal: T/L 293-5692 
External: [email protected], 845-433-5692

"I never worry about the future. It comes soon enough." --- Albert 
Einstein 



From:   Tom Huegel <[email protected]>
To:     xCAT Users Mailing list <[email protected]>
Date:   01/28/2015 01:56 PM
Subject:        [xcat-user] Network Config Question



I have the following problem when I try to provision. I used to be able to 
do this, but I managed to zap some xCAT tables and am starting from 
scratch again.

Thanks.

sl11d130: Adding a disk to SL11D130's directory entry... Done
sl11d130: Adding 3390 disk for sl11d130 as 100 ... Done

Operating system for sl11d130 set
sl11d130: Searching for acceptable network device
sl11d130: Setting up networking on XCATVSW2 (layer:2 | DHCP:0)
sl11d130: (Error) Missing network information
sl11d130: (Solution) Specify the mask, gateway, and nameservers for the 
subnet in the networks table


netname netmask mgtifname gateway dhcpserver tftpserver 
nameserversntpserverslogserversdynamicrangestaticrangestaticrangeincrementnodehostnameddnsdomainvlaniddomaincommentsdisabl
 
10_10_10_0-255_255_255_0   10.10.10.0 255.255.255.0 eth1  
10.10.10.10             
 
172_17_50_0-255_255_254_0 172.17.50.0 255.255.254.0 eth0 172.17.50.1  
172.17.51.121             
Showing 1 to 2 of 2 entries

USER SL11D130 XCAT 2G 2G G                                              
   INCLUDE SUSE                                                         
   CPU 00                                                               
   MACHINE ESA                                                          
   CONSOLE 0009 3215 T                                                  
   NICDEF 0A00 TYPE QDIO LAN SYSTEM XCATVSW2 MACID FFFFED               
   SPOOL 000C 2540 READER *                                             
   SPOOL 000D 2540 PUNCH A                                              
   SPOOL 000E 1403 A                                                    
   MDISK 0100 3390 1 5000 XCLX08 MR ALL ALL ALL                         
 PROFILE SUSE                                            
 COMMAND SET VSWITCH XCATVSW2 GRANT &USERID              
 COMMAND COUPLE 0A00 TO SYSTEM XCATVSW2                  
 COMMAND SET OBSERVER OPERATOR                           
 CPU 00                                                  
 IPL CMS PARM AUTOCR                                     
 MACH ESA 2                                              
 OPTION APPLMON                       
                   
                           
Reply

Forward




------------------------------------------------------------------------------
Dive into the World of Parallel Programming. The Go Parallel Website,
sponsored by Intel and developed in partnership with Slashdot Media, is 
your
hub for all things parallel software development, from weekly thought
leadership blogs to news, videos, case studies, tutorials and more. Take a
look and join the conversation now. http://goparallel.sourceforge.net/
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user

------------------------------------------------------------------------------
Dive into the World of Parallel Programming. The Go Parallel Website,
sponsored by Intel and developed in partnership with Slashdot Media, is your
hub for all things parallel software development, from weekly thought
leadership blogs to news, videos, case studies, tutorials and more. Take a
look and join the conversation now. http://goparallel.sourceforge.net/
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user

Reply via email to