OK, we will try to fix them. Thanks Best Regards ---------------------------------------------------------------------- Wang Xiaopeng (王晓朋) IBM China System Technology Laboratory Tel: 86-10-82453455 Email: [email protected] Address: 28,ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road, Haidian District Beijing P.R.China 100193
From: Christopher Samuel <[email protected]> To: [email protected] Date: 2015/08/14 13:28 Subject: [xcat-user] Issues with NeXtScale wiki page Hi folks, I've had reason to go through the NeXtScale wiki page here: http://sourceforge.net/p/xcat/wiki/XCAT_NeXtScale_Clusters/ and I've noticed a couple of omissions that could be addressed simply. The first is that there's no mention of doing: makedhcp -n to configure DHCP correctly (after makedns might be a good place). Secondly there's no mention of setting up a chain for node discovery to program the BMCs, perhaps adding: chain='runcmd=bmcsetup,shell' to the chdef for the ipmi group might be a good thing. For us we do: chdef -t group ipmis mgt=ipmi cons=ipmi mgt=ipmi bmcport="0" bmc='/\z/-imm/' serialport=0 serialspeed=115200 serialflow=hard chain='runcmd=bmcsetup,shell' ondiscover=nodediscover to configure our systems - though note that the group there is called ipmis for shared ipmi (we have a separate impid group for dedicated IPMI adapters). Hope this is useful! All the best, Chris -- Christopher Samuel Senior Systems Administrator VLSCI - Victorian Life Sciences Computation Initiative Email: [email protected] Phone: +61 (0)3 903 55545 http://www.vlsci.org.au/ http://twitter.com/vlsci ------------------------------------------------------------------------------ _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
_______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
