On 8/28/15 1:59 AM, Baker D.J. wrote: > Hello, > > > > We have just upgraded to xCAT 2.10 since we have a requirement to do a > rhel 7.1 installation (on a couple of diskful nodes in our cluster). I’m > aware that there are changes to the kickstart file between rhels 6 and > 7, however it isn’t clear me to how to migrate from one to the other (re > the xCAT installation). I’ve tried modifying the kickstart file that we > use to build rhels 6 nodes to no avail. When I attempt to build a node > using rhels 7 the installation process halts. There’s something about a > requirement to do a completely non interactive installation (sounds very > reasonable), IIRC I had this issue because I was missing:
"clearpart --all --initlabel" also, the installer runs in tmux, so you can get a shell by typing: "C-b 2", and various logs with "C-b <3|4|5>", which is helpful for debugging install issues. -Allie and then a bizarre comment about not being to find busybox. > There’s a screenshot below. Also I have attached a copy of the kickstart > file that I’m using in xCAT. This file has been slightly modified to > remove the obvious problems. > > > > I wondered if anyone could please provide a working rhels 7.1 kickstart > file that they have used with xCAT, and/or advise how my kickstart file > should be modified. > > > > Best regards, > > > > David. > > > > > > > > ------------------------------------------------------------------------------ > > > > _______________________________________________ > xCAT-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/xcat-user > ------------------------------------------------------------------------------ _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
