In the networks table where you define the network range the mgtifname value needs to be set to '!remote!' Make you you have the routes define properly in the route table
and finally your dhchpinterfaces in the site table needs to include !remote! in the list. Try that and see if it makes a difference Nick On 5 October 2015 at 13:31, Russell Auld <[email protected]> wrote: > Did you try “dhcpinterfaces” in the site table? > > See my thread from this past July 27 entitled: > > “Is there a way to add outside subnets to dhcpd.conf?” > > > > > > *From:* John Keenleyside [mailto:[email protected]] > *Sent:* Sunday, October 4, 2015 9:48 PM > *To:* [email protected] > *Subject:* [xcat-user] how to handle multiple subnets > > > > In my environment, each rack of machines is in its own subnet. I have xCAT > management node installed in rack 1 which uses subnet 1. I can install > machines in this rack with no problem. Now I am trying to install machines > in a second rack with subnet 2 using the xCAT management node located in > rack1/subnet1. > > > > The networks table has both subnets defined in it. However, makedhcp -n is > only generating a definition for subnet1 in the dhcpd.conf file. The dhcp > server gives an unknown network segment error when a dhcpdiscover comes in > from rack2. So I need to have subnet2 defined as well in the dhcpd.conf > file. How do I do this? > > > > Is it possible for the xCAT management node to install servers in multiple > subnets? > > Does anyone have a working example they could describe or share ? > > > > Thanks, > John Keenleyside > > > > > ------------------------------------------------------------------------------ > > _______________________________________________ > xCAT-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/xcat-user > >
------------------------------------------------------------------------------
_______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
