are all the 6 nodes defined on the same MN? check if the failed node
defined in the /etc/hosts. make sure you ran makedns and makedhcp and
compare node definition use lsdef command.
Thanks,
Casandra
...................................................................
Casandra Hong Qiu
Phone: (845) 433-9291, t/l 293-9291
Office: B/002, Floor 3, Z13
[email protected]
From: Damir Krstic <[email protected]>
To: xCAT Users Mailing list <[email protected]>
Date: 01/12/2016 04:37 PM
Subject: [xcat-user] issue when installing node
Hi,
When installing new batch of GPU nodes via xCAT I've ran into an issue I
have not seen before. Out of 6 NextScale nx360m4 nodes with k80 GPUs all
installed OK (nodeset <nodename> osimage=gpu6.6) except one.
Symptoms of the issue: node installs OK (watching it via rcons/wcons) but
on the reboot eth0 does not come up and hostname is set to
localhost.localdomain
Has anyone seen this issue before?
Thanks,
Damir
------------------------------------------------------------------------------
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
