Hello Yuan, Here is the output when I run makedhcp [root@c01xsn ~]# makedhcp -n Warning: No 172.17.0.0 specific entry for domain, and no domain defined in site table. Warning: No dynamic range specified for 172.17.0.0. If hardware discovery is being used, a dynamic range is required. Warning: No 172.31.4.0 specific entry for domain, and no domain defined in site table. Warning: No 172.31.4.0 specific entry for nameservers, and no nameservers defined in site table. Warning: No dynamic range specified for 172.31.4.0. If hardware discovery is being used, a dynamic range is required. Warning: No 172.17.0.0 specific entry for domain, and no domain defined in site table. Warning: No dynamic range specified for 172.17.0.0. If hardware discovery is being used, a dynamic range is required. Warning: No 172.31.4.0 specific entry for domain, and no domain defined in site table. Warning: No 172.31.4.0 specific entry for nameservers, and no nameservers defined in site table. Warning: No dynamic range specified for 172.31.4.0. If hardware discovery is being used, a dynamic range is required. Warning: No 172.17.16.0 specific entry for domain, and no domain defined in site table. Warning: No dynamic range specified for 172.17.16.0. If hardware discovery is being used, a dynamic range is required. Warning: No 172.31.0.0 specific entry for domain, and no domain defined in site table. Warning: No 172.31.0.0 specific entry for nameservers, and no nameservers defined in site table. Warning: No dynamic range specified for 172.31.0.0. If hardware discovery is being used, a dynamic range is required.
The result is a /etc/dhcp/dhcpd.conf which lacks zone names or labels for 172.17.0.0 172.31.4.0 The other two networks are not local to the service node, c01xsn. 172.17.16.0 172.31.0.0 I get similar results on the other service node, c05xsn but with 172.17.16.0 and 172.31.0.0 included but missing zone names. It seems like it's a problem with site definition. I have one site defined and I've tried both of these attributes with the same result. dhcpinterfaces=eth1 dhcpinterfaces=c02xmn|eth1;c01xsn|eth1;c05xsn|eth1 Thanks Roger Cline 802.769.1409 LINUX/UNIX/AIX Systems Support IBM Systems From: "Yuan Y Bai" <[email protected]> To: xCAT Users Mailing list <[email protected]> Date: 09/07/2016 10:21 PM Subject: Re: [xcat-user] makedhcp creates dhcpd.conf with syntax errors Best Regards -------------------------------------------------- Yuan Bai (白媛) CSTL HPC System Management Development Tel:86-10-82451401 E-mail: [email protected] Address: IBM ZGC Campus. Ring Building 28, ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road, Haidian District, Beijing P.R.China 100193 IBM环宇大厦 北京市海淀区东北旺西路8号，中关村软件园28号楼 邮编:100193 ------------------------------------------------------------------------------ _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
_______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
