All,
I am assuming many linux experts on this list, so since I am not sure this is
purely xCAT issue, any hints are more than welcome 😊
In our statelite deployment the boot interface comes up with broadcast address
of 0.0.0.0 –
# ifconfig eth0
eth0 Link encap:Ethernet HWaddr 6C:AE:8B:08:8E:03
inet addr:10.10.101.51 Bcast:0.0.0.0 Mask:255.255.255.0
….
The broadcast address can be setup easily with ifconfig eth0 broadcast. Eth1
boots with the right bcast address.
I wonder what could cause this issue, when seems there is no limitation on
setting it.
OS is SLES12.2 and deployment method is statelite (statefull works as expected).
THX in advance!
[http://lenovocentral.lenovo.com/marketing/branding/email_signature/images/gradient.gif]
Gilad Berman
HPC Architect
Lenovo EMEA
[Phone]+972-52-2554262
[Email]gber...@lenovo.com<mailto:gber...@lenovo.com>
Lenovo.com <http://www.lenovo.com/>
Twitter<http://twitter.com/lenovo> | Facebook<http://www.facebook.com/lenovo> |
Instagram<https://instagram.com/lenovo> | Blogs<http://blog.lenovo.com/> |
Forums<http://forums.lenovo.com/>
[DCG-Hardware]
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
