UPDATE
I solved the OS install problem ... I had inserted the wrong MAC into the
xcat mac table.
The rinv problem is still an open question though. With rinv working, the
human error factor would not have been introduced.
Cheers,
--Andy
On Thu, Oct 19, 2017 at 11:13 AM Andrew Loftus <alof...@illinois.edu> wrote:
> Hi,
>
> I'm attempting to replace an existing node with new hardware. Machine
> type is Lenovo x3650. I have removed the old node from the network, setup
> the IMM ip-address, user and passwd.
>
> At this point, rpower and pasu commands work, but the rinv command fails
> with this error:
> Error: ipmi plugin bug, pid 33988, process description: 'xCATd SSL: rinv
> to qserv-master01 for root@localhost: ipmi instance' with error 'Can't
> use string ("") as an ARRAY ref while "strict refs" in use at
> /opt/xcat/lib/perl/xCAT_plugin/ipmi.pm line 3771.
> ' while trying to fulfill request for the following nodes: qserv-master01
>
> The point of rinv is to get the MAC address of the first network interface
> and add it to the mac table. To work around this, I entered the MAC address
> manually in the mac table. At this point, I ran my rebuild script, which
> runs nodeset, rsetboot, and rpower. I expect to the node to pxe boot and
> install the OS, but instead the node pxe boots the xcat discovery
> environment.
>
> I'm confused at this point. I'm not sure if the error from rinv is
> related to the boot issue, but I can't bring up the node. Any thoughts
> would be helpful.
>
> Cheers,
> --Andy
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
