Is that preceeded by a lot of the same output over and over? I see xnba
downloading xnba, which should not be happening…. Dhcp should be doing a
different offer…
From: Carmelo Ponti (CSCS) <cpo...@cscs.ch>
Sent: Thursday, June 07, 2018 10:21 AM
To: xcat-user@lists.sourceforge.net
Subject: [External] [xcat-user] UEFI installation problem
Hello,
I would like to install a intel server board S2600WT (BIOS version
SE5C610.86B.01.01.0011 08/10/2015) using xcat with UEFI but I got the following
error at the console:
xCAT Network Boot Agent
iPXE 1.0.3-131028 (d603e) -- Open Source Network Boot Firmare -- http://ipxe.org
Features: HTTP HTTPS iSCSI DNS TFTP EFI
net1: 90:e2:ba:a1:56:f4 using <NULL> on EFI SNP (open)
[Link:up, TX:0 TXE:0 RX:0 RXE:0]
DHCP (net1 90:e2:ba:a1:56:f4) ...... ok
Next server: 148.187.xxx.xxx
Filename: xcat/xnba.efi
tftp://148.187.xxx.xxx/xcat/xnba.efi ... ok
Could not boot image: Error 0x7f38e002 (http:/ipxe/org/7f38e002)
No more network devices
Could not boot image: Error 0x7f048002 (http:/ipxe/org/7f048002)
No more network devices
Currently I'm using xCAT 2.13 and following the server configuration:
Object name: server01
arch=x86_64
bmc=148.187.xxx.xxx
bmcpassword=xxxxxx
bmcusername=root
cons=kvm
currchain=boot
currstate=install rhels7.4-x86_64-cscs_storage
groups=all,cscs
hostnames=server01.cscs.ch
interface=eno1
ip=148.187.xxx.xxx
mac=90:e2:ba:a1:56:f4
mgt=ipmi
netboot=xnba
nfsserver=148.187.xxx.xxx
nodetype=osi
os=rhels7.4
postbootscripts=otherpkgs
postscripts=syslog,remoteshell,syncfiles
power=ipmi
primarynic=eno1
profile=cscs_storage
provmethod=rhels7.4-x86_64-install-cscs_storage
status=powering-on
statustime=06-07-2018 15:49:19
tftpdir=/tftpboot
tftpserver=148.187.xxx.xxx
dhcp is configured as following:
host server01.cscs.ch {
hardware ethernet 90:E2:BA:A1:56:F4; # 10G ETH0 NIC
fixed-address 148.187.xxx.xxx;
filename "xcat/xnba.efi";
next-server 148.187.xxx.xxx;
}
When I ran "nodeset server01 osimage=rhels7.4-x86_64-install-cscs_storage"
The following 3 files are created in /tftpboot/xcat/xnba/nodes :
server01
server01.elilo
server01.uefi
I'm suspecting a problem with the BIOS version but I'm not sure.
Thank you for any advice,
Carmelo Ponti
--
----------------------------------------------------------------------
Carmelo Ponti System Engineer
CSCS Swiss Center for Scientific Computing
Via Trevano 131 Email: cpo...@cscs.ch<mailto:cpo...@cscs.ch>
CH-6900 Lugano http://www.cscs.ch
Phone: +41 91 610 82 15/Fax: +41 91 610 82 82
----------------------------------------------------------------------
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
