Hi ,Pharthiphan
Here is my solution to do it
You should use a xcat node with OPA adapter installed to build the diskless
image
After the genera diskless image build done
You should chroot to the diskless image ,then install the OPA OFED (it should
be the *IFS* file )
Then pack your new diskless image
If you need more detail , I can provide a instruction later since I need to
update my diskless image soon ,give me some days to make the test environment
ready ,thanks
Peter CZ peng
Department :Complex Solution Rack TE
Address:ISH3 Shenzhen
Lenovo China
+86 86361590
+86 18129979128
609 1590
peng...@lenovo.com<mailto:zengd...@lenovo.com>
Lenovo.com /www.lenovo.com <http://www.lenovo.com/www.lenovo.com>
Twitter<http://twitter.com/lenovo> | Facebook |
Instagram<https://instagram.com/lenovo> | Blogs<http://blog.lenovo.com/> |
Forums<http://forums.lenovo.com/>
[Lenovo_2015]
From: Pharthiphan Asokan <paso...@ddn.com>
Sent: Wednesday, August 22, 2018 8:25 PM
To: xcat-user@lists.sourceforge.net
Subject: [External] [xcat-user] How to include Omni-path driver to the
disk-less image ?
Hi All,
How to include Omni-path driver to the disk-less image ?
for Mellanox Infiniband there are documentation to add MOFED to disk-less but I
couldn't find any for Omni-path.
Regards,
Pharthiphan Asokan
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
