Once you have built you image with genimage you can install OPA into the image
using the OPA ./INSTALL -r option to specify an alternate root directory.
(no chroot is needed).
Example:
Unpack you opa install .tgz file to a staging directory and cd into it.
./INSTALL -r /install/custom/netboot/compute/rootimage -R kernel-version
Where:
/install/custom/netboot/compute/rootimage is the location of your root image
for the compute image
-R kernel-version is what is displayed by "uname -r" in your root image - only
required if you are running a non-default kernel verison.
This is explained in the Intel Omni-Path Fabric Software Installation Guide in
section 4.1.1 though not obviously about disk-less it does mention it is for
network- boot images:
https://www.intel.com/content/dam/support/us/en/documents/network-and-i-o/fabric-products/Intel_OP_Fabric_Software_IG_H76467_v9_1.pdf
Hope that helps.
Regards,
David
From: peter CZ1 Peng <peng...@lenovo.com>
Sent: Wednesday, August 22, 2018 3:04 PM
To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net>
Subject: Re: [xcat-user] [External] How to include Omni-path driver to the
disk-less image ?
Hi ,Pharthiphan
Here is my solution to do it
You should use a xcat node with OPA adapter installed to build the diskless
image
After the genera diskless image build done
You should chroot to the diskless image ,then install the OPA OFED (it should
be the *IFS* file )
Then pack your new diskless image
If you need more detail , I can provide a instruction later since I need to
update my diskless image soon ,give me some days to make the test environment
ready ,thanks
Peter CZ peng
Department :Complex Solution Rack TE
Address:ISH3 Shenzhen
Lenovo China
+86 86361590
+86 18129979128
609 1590
peng...@lenovo.com<mailto:zengd...@lenovo.com>
Lenovo.com /www.lenovo.com <http://www.lenovo.com/www.lenovo.com>
Twitter<http://twitter.com/lenovo> | Facebook |
Instagram<https://instagram.com/lenovo> | Blogs<http://blog.lenovo.com/> |
Forums<http://forums.lenovo.com/>
[Lenovo_2015]
From: Pharthiphan Asokan <paso...@ddn.com<mailto:paso...@ddn.com>>
Sent: Wednesday, August 22, 2018 8:25 PM
To: xcat-user@lists.sourceforge.net<mailto:xcat-user@lists.sourceforge.net>
Subject: [External] [xcat-user] How to include Omni-path driver to the
disk-less image ?
Hi All,
How to include Omni-path driver to the disk-less image ?
for Mellanox Infiniband there are documentation to add MOFED to disk-less but I
couldn't find any for Omni-path.
Regards,
Pharthiphan Asokan
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
