No, the rcons isn't working here.
The session starts but the screen stays blank.
Best Regards
-------- Message d'origine --------
De : Jarrod Johnson <jjohns...@lenovo.com>
Date : 24/10/2018 17:52 (GMT+01:00)
À : xCAT Users Mailing list <xcat-user@lists.sourceforge.net>
Objet : Re: [xcat-user] [External] Diskless install leads to emergency mode
Is there output in rcons to go with it?
From: Huette, Antoine <antoine.hue...@bechtle.com>
Sent: Wednesday, October 24, 2018 11:49 AM
To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net>
Subject: Re: [xcat-user] [External] Diskless install leads to emergency mode
Hi Jarrod
It is on the video console connected to the node :)
I just tried switching from xnba to pxe but sadly nothing changed.
>From what I can see the kernel and initrd files are correctly sent to the
>nodes, then it stops at "IPv6 enp3s0f0 link becomes ready" for a few seconds,
>then an error about dracut-initqueue that cannot redirect to
>/Var/log/xCAT/xCAT.log, and then I think it tries to boot the image but it
>stops in emergency mode ("welcome to emergency mode..."). This line appears
>just after "initialised nouveau..."
Best Regards
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
