Thanks Thomas,
The information is very clear, but it is just a bit different with xCAT typical assumption.
But it should be handled when discovering, xCAT will assign the same IP to eth0 and eth2 during the auto-discovery.
Ertao, could you help to give more information about that?
And Thomas, could you give a `lsdef` output on your node, before discovering and after discovering?
To set static, you can use `hardeths` or `confignetwork -s`
Bin Xu
HPC Software Development
Software Defined Infrastructure, IBM Systems
Software Defined Infrastructure, IBM Systems
Phone: 86-010-82454067
E-mail: bx...@cn.ibm.com
----- Original message -----
From: Thomas HUMMEL <thomas.hum...@pasteur.fr>
To: xcat-user@lists.sourceforge.net
Cc:
Subject: Re: [xcat-user] noderes,nics,confignics
Date: Tue, Feb 19, 2019 12:42 AM
So actually both eth0 and eth2 on a node are connected to the same network.
This come from the time we'd want to be able to fallback to 1Gb/s
connectivity.
--
T.
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
_______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user
