I’ve been asked to use non-vendor-default passwords, where would I specify this?
-- ddj Dave Johnson > On Mar 13, 2019, at 10:59 AM, Casandra H Qiu <cxh...@us.ibm.com> wrote: > > Hi, David: > > xCAT should able to support cumulus switch on 2.13.4, > are u looking for switch configure file in the `/var/opt/xcat`? The > configuration file is NOT needed for xCAT 2.8 and later. > > you can use this script `xCAT-server/share/xcat/scripts/configonie` (check > --help) to config the cumulus switches. > > the switchtype is "onie" for cumulus switch. to config the ssh (used default > username and password): > > /opt/xcat/share/xcat/scripts/configonie --switches switchname --ssh > > > Make sure switch is defined in the xCAT db. > > > Thanks, > Casandra > > ................................................................... > Casandra Hong Qiu > Phone: (845) 433-9291, t/l 293-9291 > Office: Building 8, 3-B-04 > cxh...@us.ibm.com > > > > <graycol.gif>David Johnson ---03/13/2019 09:58:12 AM---Thanks for the earlier > answer. Now I'm trying to figure out how to do xdsh or psh to these switches > > From: David Johnson <david_john...@brown.edu> > To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net> > Date: 03/13/2019 09:58 AM > Subject: Re: [xcat-user] provisioning CumulusLinux TOR switches with xCAT > > > > > Thanks for the earlier answer. Now I'm trying to figure out how to do xdsh or > psh to these > switches -- custom password, userid "cumulus", etc. I found a 2015 doc > mentioning /var/opt/xcat > containing definitions for various supported switch types, but I can't find > anything there. > > -- ddj > On Mar 3, 2019, at 10:14 PM, Song BJ Yang <yang...@cn.ibm.com> wrote: > > Hi David, > > xCAT does provide the support for cumulus switch provision and configuration, > please find the Doc on > https://xcat-docs.readthedocs.io/en/latest/advanced/networks/onie_switches/index.html > > > you mentioned > > I'd like to add a small dynamic DHCP range on that 10.4.y.z network while > > nodes continue to boot and install on the existing 172.20.p.q (em1) network. > > > The biggest issue is that the TOR switch management ports are on a > > completely different network from > the cluster nodes. I have the xCAT master attached to that net on interface > em3. > > > you might need to add em3 and em1 to site.dhcpinterfaces. > [root@boston36 ~]# tabdump -d site|grep dhcpinterf -A6 > dhcpinterfaces: The network interfaces DHCP should listen on. If it is the > same for all nodes, use a comma-separated list of the NICs. To specify > different NICs for different nodes, use the format: > "xcatmn|eth1,eth2;service|bond0", > where xcatmn is the name of the management node, DHCP should listen on the > eth1 and eth2 interfaces. All the nodes in group 'service' should listen on > the 'bond0' interface. > > and well define the 2 networks in networks table. > > Please feel free to ask us if any issue. > ------------------------------------------------------------------------------ > YANG Song (杨嵩) > IBM China System Technology Laboratory > Tel: 86-10-82452903 > Email: yang...@cn.ibm.com > Address: Building 28, ZhongGuanCun Software Park, > No.8, Dong Bei Wang West Road, Haidian District Beijing 100193, PRC > > 北京市海淀区东北旺西路8号中关村软件园28号楼 > 邮编: 100193 > > > ----- Original message ----- > From: David Johnson <david_john...@brown.edu> > To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net> > Cc: > Subject: [xcat-user] provisioning CumulusLinux TOR switches with xCAT > Date: Sun, Mar 3, 2019 7:40 AM > > Currently running xCAT 2.13.4. I've been manually installing and configuring > our CumulusLinux based switches, and it's getting old. > I've got more than a dozen deployed, and now they want OS upgrades.... > > I noticed some online docs about managing switches with xCAT, but nothing > specific to cumulus linux. > I'd like to use the xcat httpd to serve the images, and maybe use xdcp and > xdsh to do the configuration > and license installation. However I don't want to mess up the rest of the > cluster. > > The biggest issue is that the TOR switch management ports are on a completely > different network from > the cluster nodes. I have the xCAT master attached to that net on interface > em3. I'd like to add a small dynamic > DHCP range on that 10.4.y.z network while nodes continue to boot and install > on the existing 172.20.p.q (em1) network. > Also need to have the web server listening on em3. > > Thanks, > -- ddj > Dave Johnson > > > > > > _______________________________________________ > xCAT-user mailing list > xCAT-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xcat-user > > > > _______________________________________________ > xCAT-user mailing list > xCAT-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xcat-user > _______________________________________________ > xCAT-user mailing list > xCAT-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xcat-user > > > > _______________________________________________ > xCAT-user mailing list > xCAT-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xcat-user
_______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user
