Hi,
I have a problem getting a diskless image to run on Opteron Supermicro
H8DGT. The modules in the init process are loaded. The network is
initialized and then there is no output. I have already added echo's to
the init script of ramdisk. But they are never written to the console.
/[ 0.000000] Linux version 4.15.0-101-generic
(buildd@lgw01-amd64-003) (gcc version 7.5.0 (Ubuntu
7.5.0-3ubuntu1~18.04)) #102-Ubuntu SMP Mon May 11 10:07:26 UTC 2020
(Ubuntu 4.15.0-101.102-generic 4.15.18) segment 9590:4F00, data segment
8F57:6390 (573-618kB) //
//[ 0.000000] Command line:
imgurl=http://192.168.113.254:80//install/netboot/ubuntu18.04.3/x86_64/xray/rootimg.cpio.gz
XCAT=192.168.///113/.254:3001 XCATHTTPPORT=80 console=tty0
console=ttyS1,115200n8r mce=off BOOTIF=01-00-25-90-af-c7-d6mory after
PXE unload DEV 0000:00:19.3 (INTERRUPT)//
//[ 0.000000] KERNEL supported cpus: //
//[ 0.000000] Intel GenuineIntel //
//[ 0.000000] AMD AuthenticAMD //
//[ 0.000000] Centaur CentaurHauls //
//[ 0.000000] random: get_random_u32 called from
bsp_init_amd+0x207/0x2c0 with crng_init=0//
//[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating
point registers'//
//[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' //
//[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' //
//[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 //
//[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is
832 bytes, using 'standard' format.//
//[ 0.000000] e820: BIOS-provided physical RAM map: //
//[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009a7ff]
usable //
//[ 0.000000] BIOS-e820: [mem 0x000000000009a800-0x000000000009ffff]
reserved DEV 0000:00:1a.3 (INTERRUPT)//
//[ 0.000000] BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff]
reservedok//
//[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfe8ffff]
usable //
//[ 0.000000] BIOS-e820: [mem 0x00000000dfe9e000-0x00000000dfe9ffff]
type 9tate//
//[ 0.000000] BIOS-e820: [mem 0x00000000dfea0000-0x00000000dfeb1fff]
ACPI data//
//[ 0.000000] BIOS-e820: [mem 0x00000000dfeb2000-0x00000000dfedffff]
ACPI NVS//
//[ 0.000000] BIOS-e820: [mem 0x00000000dfee0000-0x00000000efffffff]
reserved//
//[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff]
reserved//
//[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000401effffff]
usable//
//[ 0.000000] NX (Execute Disable) protection: active//
//[ 0.000000] SMBIOS 2.6 present. 0MB 7: 0MB//
//[ 0.000000] DMI: Supermicro H8DGT /H8DGT , BIOS 2.0b
07/13/2012//
//[ 0.000000] AGP: No AGP bridge foundcount: 2//
//[ 0.000000] e820: last_pfn = 0x401f000 max_arch_pfn =
0x400000000roller F15h: DEV 0000:00:1b.3 (INTERRUPT)//
//[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP
UC- WT DAC PCI controller: DEV 0000:00:18.2 (POLLED)//
//[ 0.000000] e820: last_pfn = 0xdfe90 max_arch_pfn = 0x400000000//
//[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f]y//
//[ 0.000000] Scanning 1 areas for low memory corruptionis Up 1000
Mbps Full Duplex, Flow Control: RX//
//[ 0.000000] Using GB pages for direct mappingh0: link becomes ready//
//[ 0.000000] RAMDISK: [mem 0x74800000-0x7ffc4fff]//
//[ 0.000000] ACPI: Early table checksum verification disabled//
//[ 0.000000] ACPI: RSDP 0x00000000000FA1F0 000024 (v02 ACPIAM)//
//[ 0.000000] ACPI: XSDT 0x00000000DFEA0100 000084 (v01
SMCI 20120713 MSFT 00000097)//
//[ 0.000000] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 071312
FACP1057 20120713 MSFT 00000097)//
//[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in
FADT/Gpe0Block: 64/32 (20170831/tbfadt-603)//
//[ 0.000000] ACPI: DSDT 0x00000000DFEA06B0 00586A (v01 1AA11
1AA11000 00000000 INTL 20051117)//
//[ 0.000000] ACPI: FACS 0x00000000DFEB2000 000040y# rinstall
r01-xray002 osimage //
//[ 0.000000] ACPI: FACS 0x00000000DFEB2000 000040//
//[ 0.000000] ACPI: APIC 0x00000000DFEA0390 000158 (v01 071312
APIC1057 20120713 MSFT 00000097)//
//[ 0.000000] ACPI: MCFG 0x00000000DFEA04F0 00003C (v01 071312
OEMMCFG 20120713 MSFT 00000097)//
//[ 0.000000] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 071312
OEMB1057 20120713 MSFT 00000097)1-xray002//
//[ 0.000000] ACPI: HPET 0x00000000DFEAA6B0 000038 (v01 071312
OEMHPET 20120713 MSFT 00000097)//
//[ 0.000000] ACPI: SRAT 0x00000000DFEAA6F0 0002A0 (v02 AMD
AGESA 00000001 AMD 00000001)//
//[ 0.000000] ACPI: SLIT 0x00000000DFEAA990 00003C (v01 AMD
AGESA 00000001 AMD 00000001)//
//[ 0.000000] ACPI: SSDT 0x00000000DFEAA9D0 00276C (v01 A M I
POWERNOW 00000001 AMD 00000001)//
//[ 0.000000] ACPI: EINJ 0x00000000DFEAD140 000130 (v01 AMIER
AMI_EINJ 20120713 MSFT 00000097)//
//[ 0.000000] ACPI: BERT 0x00000000DFEAD2D0 000030 (v01 AMIER
AMI_BERT 20120713 MSFT 00000097)//
//[ 0.000000] ACPI: ERST 0x00000000DFEAD300 0001B0 (v01 AMIER
AMI_ERST 20120713 MSFT 00000097)1-xray002//
//[ 0.000000] ACPI: HEST 0x00000000DFEAD4B0 0000A8 (v01 AMIER
ABC_HEST 20120713 MSFT 00000097)//
//[ 0.000000] SRAT: PXM 0 -> APIC 0x20 -> Node 0//
//[ 0.000000] SRAT: PXM 0 -> APIC 0x21 -> Node 0//
//[ 0.000000] SRAT: PXM 0 -> APIC 0x22 -> Node 0//
//[ 0.000000] SRAT: PXM 0 -> APIC 0x23 -> Node 0//
//[ 0.000000] SRAT: PXM 0 -> APIC 0x24 -> Node 0//
//[ 0.000000] SRAT: PXM 0 -> APIC 0x25 -> Node 0//
//[ 0.000000] SRAT: PXM 1 -> APIC 0x26 -> Node 1//
//[ 0.000000] SRAT: PXM 1 -> APIC 0x27 -> Node 1//
//[ 0.000000] SRAT: PXM 1 -> APIC 0x28 -> Node 1//
//[ 0.000000] SRAT: PXM 1 -> APIC 0x29 -> Node 1//
//[ 0.000000] SRAT: PXM 1 -> APIC 0x2a -> Node 1//
//[ 0.000000] SRAT: PXM 1 -> APIC 0x2b -> Node 1//
//[ 0.000000] SRAT: PXM 2 -> APIC 0x40 -> Node 2//
//[ 0.000000] SRAT: PXM 2 -> APIC 0x41 -> Node 2//
//[ 0.000000] SRAT: PXM 2 -> APIC 0x42 -> Node 2//
//[ 0.000000] SRAT: PXM 2 -> APIC 0x43 -> Node 2//
//[ 0.000000] SRAT: PXM 2 -> APIC 0x44 -> Node 2//
//[ 0.000000] SRAT: PXM 2 -> APIC 0x45 -> Node 2//
//[ 0.000000] SRAT: PXM 3 -> APIC 0x46 -> Node 3//
//[ 0.000000] SRAT: PXM 3 -> APIC 0x47 -> Node 3//
//[ 0.000000] SRAT: PXM 3 -> APIC 0x48 -> Node 3//
//[ 0.000000] SRAT: PXM 3 -> APIC 0x49 -> Node 3//
//[ 0.000000] SRAT: PXM 3 -> APIC 0x4a -> Node 3//
//[ 0.000000] SRAT: PXM 3 -> APIC 0x4b -> Node 3//
//[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]//
//[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]//
//[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x101fffffff]//
//[ 0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x1020000000-0x201fffffff]//
//[ 0.000000] ACPI: SRAT: Node 2 PXM 2 [mem 0x2020000000-0x301fffffff]//
//[ 0.000000] ACPI: SRAT: Node 3 PXM 3 [mem 0x3020000000-0x401effffff]//
//[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem
0x00100000-0xdfffffff] -> [mem 0x00000000-0xdfffffff]//
//[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xdfffffff] + [mem
0x100000000-0x101fffffff] -> [mem 0x00000000-0x101fffffff]//
//[ 0.000000] NODE_DATA(0) allocated [mem 0x101ffd5000-0x101fffffff]//
//[ 0.000000] NODE_DATA(1) allocated [mem 0x201ffd5000-0x201fffffff]//
//[ 0.000000] NODE_DATA(2) allocated [mem 0x301ffd5000-0x301fffffff]//
//[ 0.000000] NODE_DATA(3) allocated [mem 0x401efd4000-0x401effefff]//
//[ 0.000000] tsc: Fast TSC calibration using PIT//
//[ 0.000000] Zone ranges://
//[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]//
//[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]//
//[ 0.000000] Normal [mem 0x0000000100000000-0x000000401effffff]//
//[ 0.000000] Device empty//
//[ 0.000000] Movable zone start for each node//
//[ 0.000000] Early memory node ranges//
//[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000099fff]//
//[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dfe8ffff]//
//[ 0.000000] node 0: [mem 0x0000000100000000-0x000000101fffffff]//
//[ 0.000000] node 1: [mem 0x0000001020000000-0x000000201fffffff]//
//[ 0.000000] node 2: [mem 0x0000002020000000-0x000000301fffffff]//
//[ 0.000000] node 3: [mem 0x0000003020000000-0x000000401effffff]//
//[ 0.000000] Reserved but unavailable: 103 pages//
//[ 0.000000] Initmem setup node 0 [mem
0x0000000000001000-0x000000101fffffff]//
//[ 0.000000] Initmem setup node 1 [mem
0x0000001020000000-0x000000201fffffff]//
//[ 0.000000] Initmem setup node 2 [mem
0x0000002020000000-0x000000301fffffff]//
//[ 0.000000] Initmem setup node 3 [mem
0x0000003020000000-0x000000401effffff]//
//[ 0.000000] ACPI: PM-Timer IO Port: 0x808//
//[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])//
//[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])//
//[ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000,
GSI 0-23//
//[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)//
//[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low
level)//
//[ 0.000000] Using ACPI (MADT) for SMP configuration information//
//[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000//
//[ 0.000000] smpboot: Allowing 32 CPUs, 8 hotplug CPUs//
//[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]//
//[ 0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]//
//[ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]//
//[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e5fff]//
//[ 0.000000] PM: Registered nosave memory: [mem 0x000e6000-0x000fffff]//
//[ 0.000000] PM: Registered nosave memory: [mem 0xdfe90000-0xdfe9dfff]//
//[ 0.000000] PM: Registered nosave memory: [mem 0xdfe9e000-0xdfe9ffff]//
//[ 0.000000] PM: Registered nosave memory: [mem 0xdfea0000-0xdfeb1fff]//
//[ 0.000000] PM: Registered nosave memory: [mem 0xdfeb2000-0xdfedffff]//
//[ 0.000000] PM: Registered nosave memory: [mem 0xdfee0000-0xefffffff]//
//[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffdfffff]//
//[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]//
//[ 0.000000] e820: [mem 0xf0000000-0xffdfffff] available for PCI
devices//
//[ 0.000000] Booting paravirtualized kernel on bare hardware//
//[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff
max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns//
//[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32
nr_cpu_ids:32 nr_node_ids:4//
//[ 0.000000] percpu: Embedded 45 pages/cpu s147456 r8192 d28672
u262144//
//[ 0.000000] Built 4 zonelists, mobility grouping on. Total pages:
66055745//
//[ 0.000000] Policy zone: Normal//
//[ 0.000000] Kernel command line:
imgurl=http://192.168.113.254:80//install/netboot/ubuntu18.04.3/x86_64/xray/rootimg.cpio.gz
XCAT=192.168.113.254:3001 XCATHTTPPORT=80 console=tty0
console=ttyS1,115200n8r mce=off BOOTIF=01-00-25-90-af-c7-d6//
//[ 0.000000] AGP: Checking aperture...//
//[ 0.000000] AGP: No AGP bridge found//
//[ 0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff]
(32MB)//
//[ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole//
//[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup//
//[ 0.000000] AGP: This costs you 64MB of RAM//
//[ 0.000000] AGP: Mapping aperture over RAM [mem
0xd4000000-0xd7ffffff] (65536KB)//
//[ 0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]//
//[ 0.000000] Memory: 263868140K/268417188K available (12300K kernel
code, 2481K rwdata, 4268K rodata, 2432K init, 2712K bss, 4549048K
reserved, 0K cma-reserved)//
//[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32,
Nodes=4//
//[ 0.000000] ftrace: allocating 39364 entries in 154 pages//
//[ 0.000000] Hierarchical RCU implementation.//
//[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.//
//[ 0.000000] Tasks RCU enabled.//
//[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16,
nr_cpu_ids=32//
//[ 0.000000] NR_IRQS: 524544, nr_irqs: 680, preallocated irqs: 16//
//[ 0.000000] Console: colour VGA+ 80x25//
//[ 0.000000] console [tty0] enabled//
//[ 0.000000] console [ttyS1] enabled//
//[ 0.000000] mempolicy: Enabling automatic NUMA balancing. Configure
with numa_balancing= or the kernel.numa_balancing sysctl//
//[ 0.000000] ACPI: Core revision 20170831//
//[ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded//
//[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 133484873504 ns//
//[ 0.004000] APIC: Switch to symmetric I/O mode setup//
//[ 0.008000] Switched APIC routing to physical flat.//
//[ 0.012000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1//
//[ 0.032000] tsc: Fast TSC calibration using PIT//
//[ 0.036000] tsc: Detected 2599.905 MHz processor//
//[ 0.040000] Calibrating delay loop (skipped), value calculated
using timer frequency.. 5199.81 BogoMIPS (lpj=10399620)//
//[ 0.044002] pid_max: default: 32768 minimum: 301//
//[ 0.048150] Security Framework initialized//
//[ 0.052002] Yama: becoming mindful.//
//[ 0.056071] AppArmor: AppArmor initialized//
//[ 0.104938] Dentry cache hash table entries: 16777216 (order: 15,
134217728 bytes)//
//[ 0.129792] Inode-cache hash table entries: 8388608 (order: 14,
67108864 bytes)//
//[ 0.132730] Mount-cache hash table entries: 262144 (order: 9,
2097152 bytes)//
//[ 0.136684] Mountpoint-cache hash table entries: 262144 (order: 9,
2097152 bytes)//
//[ 0.140473] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512//
//[ 0.144004] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512,
1GB 0//
//[ 0.148003] Spectre V1 : Mitigation: usercopy/swapgs barriers and
__user pointer sanitization//
//[ 0.152003] Spectre V2 : Mitigation: Full AMD retpoline//
//[ 0.156002] Spectre V2 : Spectre v2 / SpectreRSB mitigation:
Filling RSB on context switch//
//[ 0.160003] Speculative Store Bypass: Mitigation: Speculative Store
Bypass disabled via prctl and seccomp//
//[ 0.174247] Freeing SMP alternatives memory: 36K//
//[ 0.292383] smpboot: CPU0: AMD Opteron(tm) Processor 6344 (family:
0x15, model: 0x2, stepping: 0x0)//
//[ 0.296278] Performance Events: Fam15h core perfctr, AMD PMU driver.//
//[ 0.300004] ... version: 0//
//[ 0.304001] ... bit width: 48//
//[ 0.308001] ... generic registers: 6//
//[ 0.312001] ... value mask: 0000ffffffffffff//
//[ 0.316001] ... max period: 00007fffffffffff//
//[ 0.320001] ... fixed-purpose events: 0//
//[ 0.324001] ... event mask: 000000000000003f//
//[ 0.328082] Hierarchical SRCU implementation.//
//[ 0.333510] NMI watchdog: Enabled. Permanently consumes one hw-PMU
counter.//
//[ 0.336016] smp: Bringing up secondary CPUs ...//
//[ 0.340188] x86: Booting SMP configuration://
//[ 0.344004] .... node #0, CPUs: #1 #2 #3 #4 #5//
//[ 0.364003] .... node #1, CPUs: #6 #7 #8 #9 #10 #11//
//[ 0.384003] .... node #2, CPUs: #12 #13 #14 #15 #16 #17//
//[ 0.488003] .... node #3, CPUs: #18 #19 #20 #21 #22 #23//
//[ 0.508086] smp: Brought up 4 nodes, 24 CPUs//
//[ 0.516002] smpboot: Max logical packages: 3//
//[ 0.520005] smpboot: Total of 24 processors activated (124796.32
BogoMIPS)//
//[ 0.542106] devtmpfs: initialized//
//[ 0.544096] x86/mm: Memory block size: 2048MB//
//[ 0.552208] evm: security.selinux//
//[ 0.555602] evm: security.SMACK64//
//[ 0.556002] evm: security.SMACK64EXEC//
//[ 0.560001] evm: security.SMACK64TRANSMUTE//
//[ 0.564001] evm: security.SMACK64MMAP//
//[ 0.568001] evm: security.apparmor//
//[ 0.572001] evm: security.ima//
//[ 0.576001] evm: security.capability//
//[ 0.580056] PM: Registering ACPI NVS region [mem
0xdfeb2000-0xdfedffff] (188416 bytes)//
//[ 0.584178] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns//
//[ 0.588044] futex hash table entries: 8192 (order: 7, 524288 bytes)//
//[ 0.592384] pinctrl core: initialized pinctrl subsystem//
//[ 0.596136] RTC time: 10:09:59, date: 05/25/20//
//[ 0.605860] NET: Registered protocol family 16//
//[ 0.608111] audit: initializing netlink subsys (disabled)//
//[ 0.616042] audit: type=2000 audit(1590401398.616:1):
state=initialized audit_enabled=0 res=1//
//[ 0.624008] cpuidle: using governor ladder//
//[ 0.628049] cpuidle: using governor menu//
//[ 0.632098] ACPI: bus type PCI registered//
//[ 0.636004] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5//
//[ 0.644145] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)//
//[ 0.652005] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved
in E820//
//[ 0.660019] PCI: Using configuration type 1 for base access//
//[ 0.676126] HugeTLB registered 1.00 GiB page size, pre-allocated 0
pages//
//[ 0.680004] HugeTLB registered 2.00 MiB page size, pre-allocated 0
pages//
//[ 0.688290] ACPI: Added _OSI(Module Device)//
//[ 0.692009] ACPI: Added _OSI(Processor Device)//
//[ 0.696002] ACPI: Added _OSI(3.0 _SCP Extensions)//
//[ 0.704002] ACPI: Added _OSI(Processor Aggregator Device)//
//[ 0.708002] ACPI: Added _OSI(Linux-Dell-Video)//
//[ 0.712002] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)//
//[ 0.720002] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)//
//[ 0.724265] ACPI: Executed 2 blocks of module-level executable AML
code//
//[ 0.738984] ACPI: Interpreter enabled//
//[ 0.740029] ACPI: (supports S0 S1 S4 S5)//
//[ 0.744003] ACPI: Using IOAPIC for interrupt routing//
//[ 0.752087] HEST: Table parsing has been initialized.//
//[ 0.756004] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug//
//[ 0.764288] ACPI: Enabled 4 GPEs in block 00 to 1F//
//[ 0.782817] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])//
//[ 0.788008] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
ClockPM Segments MSI]//
//[ 0.796007] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling
ASPM//
//[ 0.804422] PCI host bridge to bus 0000:00//
//[ 0.808003] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7
window]//
//[ 0.816002] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff
window]//
//[ 0.820002] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff window]//
//[ 0.828002] pci_bus 0000:00: root bus resource [mem
0x000d0000-0x000dffff window]//
//[ 0.836002] pci_bus 0000:00: root bus resource [mem
0xf0000000-0xfebfffff window]//
//[ 0.844003] pci_bus 0000:00: root bus resource [bus 00-ff]//
//[ 0.848187] pci 0000:00:02.0: enabling Extended Tags//
//[ 0.856152] pci 0000:00:04.0: enabling Extended Tags//
//[ 0.860234] pci 0000:00:11.0: set SATA to AHCI mode//
//[ 0.865472] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io
0x01f0-0x01f7]//
//[ 0.876002] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io
0x03f6]//
//[ 0.880002] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io
0x0170-0x0177]//
//[ 0.888002] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io
0x0376]//
//[ 0.912170] pci 0000:00:02.0: PCI bridge to [bus 03]//
//[ 0.916241] pci 0000:02:00.0: VF(n) BAR0 space: [mem
0x00000000-0x0001ffff 64bit] (contains BAR0 for 8 VFs)//
//[ 0.928022] pci 0000:02:00.0: VF(n) BAR3 space: [mem
0x00000000-0x0001ffff 64bit] (contains BAR3 for 8 VFs)//
//[ 0.936282] pci 0000:02:00.1: VF(n) BAR0 space: [mem
0x00000000-0x0001ffff 64bit] (contains BAR0 for 8 VFs)//
//[ 0.948019] pci 0000:02:00.1: VF(n) BAR3 space: [mem
0x00000000-0x0001ffff 64bit] (contains BAR3 for 8 VFs)//
//[ 0.968020] pci 0000:00:04.0: PCI bridge to [bus 02]//
//[ 0.972266] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive
decode)//
//[ 0.981013] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14
15)//
//[ 0.988073] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14
15)//
//[ 0.992072] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14
15)//
//[ 1.000071] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14
15)//
//[ 1.008003] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 *7 10 11 12 14
15)//
//[ 1.012071] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14
15) *0, disabled.//
//[ 1.020071] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 12 14
15)//
//[ 1.028072] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14
15) *0, disabled.//
//[ 1.036471] SCSI subsystem initialized//
//[ 1.040103] pci 0000:01:04.0: vgaarb: setting as boot VGA device//
//[ 1.044000] pci 0000:01:04.0: vgaarb: VGA device added:
decodes=io+mem,owns=io+mem,locks=none//
//[ 1.056003] pci 0000:01:04.0: vgaarb: bridge control possible//
//[ 1.060001] vgaarb: loaded//
//[ 1.064024] ACPI: bus type USB registered//
//[ 1.068021] usbcore: registered new interface driver usbfs//
//[ 1.072011] usbcore: registered new interface driver hub//
//[ 1.080124] usbcore: registered new device driver usb//
//[ 1.084138] EDAC MC: Ver: 3.0.0//
//[ 1.088143] PCI: Using ACPI for IRQ routing//
//[ 1.102280] NetLabel: Initializing//
//[ 1.104001] NetLabel: domain hash size = 128//
//[ 1.108001] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO//
//[ 1.116020] NetLabel: unlabeled traffic allowed by default//
//[ 1.120091] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0//
//[ 1.128003] hpet0: 4 comparators, 32-bit 14.318180 MHz counter//
//[ 1.136007] clocksource: Switched to clocksource hpet//
//[ 1.159514] VFS: Disk quotas dquot_6.6.0//
//[ 1.163602] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
bytes)//
//[ 1.170781] AppArmor: AppArmor Filesystem Enabled//
//[ 1.175615] pnp: PnP ACPI init//
//[ 1.179709] system 00:03: [io 0x0a10-0x0a1f] has been reserved//
//[ 1.185929] system 00:04: [mem 0xfec00000-0xfec00fff] could not be
reserved//
//[ 1.192991] system 00:04: [mem 0xfee00000-0xfee00fff] has been
reserved//
//[ 1.200073] system 00:05: [io 0x0ca2-0x0ca3] could not be reserved//
//[ 1.206431] system 00:05: [io 0x0550-0x0551] has been reserved//
//[ 1.212445] system 00:05: [io 0x04d0-0x04d1] has been reserved//
//[ 1.218459] system 00:05: [io 0x040b] has been reserved//
//[ 1.225380] system 00:05: [io 0x04d6] has been reserved//
//[ 1.230783] system 00:05: [io 0x0c00-0x0c01] has been reserved//
//[ 1.236801] system 00:05: [io 0x0c14] has been reserved//
//[ 1.242207] system 00:05: [io 0x0c50-0x0c51] has been reserved//
//[ 1.248225] system 00:05: [io 0x0c52] has been reserved//
//[ 1.253653] system 00:05: [io 0x0c6c] has been reserved//
//[ 1.259056] system 00:05: [io 0x0c6f] has been reserved//
//[ 1.264457] system 00:05: [io 0x0cd0-0x0cd1] has been reserved//
//[ 1.270475] system 00:05: [io 0x0cd2-0x0cd3] has been reserved//
//[ 1.276488] system 00:05: [io 0x0cd4-0x0cd5] has been reserved//
//[ 1.282504] system 00:05: [io 0x0cd6-0x0cd7] has been reserved//
//[ 1.288519] system 00:05: [io 0x0cd8-0x0cdf] has been reserved//
//[ 1.294534] system 00:05: [io 0x0800-0x089f] has been reserved//
//[ 1.300550] system 00:05: [io 0x0b00-0x0b0f] has been reserved//
//[ 1.306565] system 00:05: [io 0x0b20-0x0b3f] has been reserved//
//[ 1.312580] system 00:05: [io 0x0900-0x090f] has been reserved//
//[ 1.318596] system 00:05: [io 0x0910-0x091f] has been reserved//
//[ 1.324609] system 00:05: [io 0xfe00-0xfefe] has been reserved//
//[ 1.330625] system 00:05: [mem 0xffb80000-0xffbfffff] has been
reserved//
//[ 1.337335] system 00:05: [mem 0xfec10000-0xfec1001f] has been
reserved//
//[ 1.344050] system 00:05: [mem 0xffe50000-0xffe5e05f] has been
reserved//
//[ 1.351508] system 00:08: [mem 0xe0000000-0xefffffff] has been
reserved//
//[ 1.358527] system 00:09: [mem 0x00000000-0x0009ffff] could not be
reserved//
//[ 1.365588] system 00:09: [mem 0x000c0000-0x000cffff] could not be
reserved//
//[ 1.372650] system 00:09: [mem 0x000e0000-0x000fffff] could not be
reserved//
//[ 1.379704] system 00:09: [mem 0x00100000-0xdfffffff] could not be
reserved//
//[ 1.386759] system 00:09: [mem 0xfec00000-0xffffffff] could not be
reserved//
//[ 1.393968] pnp: PnP ACPI: found 10 devices//
//[ 1.405418] clocksource: acpi_pm: mask: 0xffffff max_cycles:
0xffffff, max_idle_ns: 2085701024 ns//
//[ 1.414461] pci 0000:00:02.0: PCI bridge to [bus 03]//
//[ 1.419519] pci 0000:00:02.0: bridge window [mem
0xfea00000-0xfebfffff]//
//[ 1.426405] pci 0000:00:02.0: bridge window [mem
0xfc800000-0xfcffffff 64bit pref]//
//[ 1.434275] pci 0000:02:00.0: BAR 7: no space for [mem size
0x00020000 64bit]//
//[ 1.441505] pci 0000:02:00.0: BAR 7: failed to assign [mem size
0x00020000 64bit]//
//[ 1.449106] pci 0000:02:00.0: BAR 10: no space for [mem size
0x00020000 64bit]//
//[ 1.456447] pci 0000:02:00.0: BAR 10: failed to assign [mem size
0x00020000 64bit]//
//[ 1.464135] pci 0000:02:00.1: BAR 7: no space for [mem size
0x00020000 64bit]//
//[ 1.471362] pci 0000:02:00.1: BAR 7: failed to assign [mem size
0x00020000 64bit]//
//[ 1.478976] pci 0000:02:00.1: BAR 10: no space for [mem size
0x00020000 64bit]//
//[ 1.486345] pci 0000:02:00.1: BAR 10: failed to assign [mem size
0x00020000 64bit]//
//[ 1.494037] pci 0000:00:04.0: PCI bridge to [bus 02]//
//[ 1.499093] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]//
//[ 1.505286] pci 0000:00:04.0: bridge window [mem
0xfe900000-0xfe9fffff]//
//[ 1.512172] pci 0000:00:14.4: PCI bridge to [bus 01]//
//[ 1.517236] pci 0000:00:14.4: bridge window [mem
0xfdf00000-0xfe7fffff]//
//[ 1.524124] pci 0000:00:14.4: bridge window [mem
0xfb000000-0xfbffffff pref]//
//[ 1.531481] pci 0000:00:04.0: PCI bridge to [bus 02]//
//[ 1.536552] pci 0000:00:04.0: BAR 14: assigned [mem
0xf0000000-0xf01fffff]//
//[ 1.543542] pci 0000:00:02.0: PCI bridge to [bus 03]//
//[ 1.548602] pci 0000:00:02.0: bridge window [mem
0xfea00000-0xfebfffff]//
//[ 1.555489] pci 0000:00:02.0: bridge window [mem
0xfc800000-0xfcffffff 64bit pref]//
//[ 1.563359] pci 0000:02:00.0: BAR 0: assigned [mem
0xf0000000-0xf001ffff]//
//[ 1.570265] pci 0000:02:00.0: BAR 1: assigned [mem
0xf0020000-0xf003ffff]//
//[ 1.577150] pci 0000:02:00.0: BAR 6: assigned [mem
0xf0040000-0xf005ffff pref]//
//[ 1.584491] pci 0000:02:00.1: BAR 0: assigned [mem
0xf0060000-0xf007ffff]//
//[ 1.591375] pci 0000:02:00.1: BAR 1: assigned [mem
0xf0080000-0xf009ffff]//
//[ 1.598278] pci 0000:02:00.1: BAR 6: assigned [mem
0xf00a0000-0xf00bffff pref]//
//[ 1.605632] pci 0000:02:00.0: BAR 3: assigned [mem
0xf00c0000-0xf00c3fff]//
//[ 1.612513] pci 0000:02:00.0: BAR 7: assigned [mem
0xf00c4000-0xf00e3fff 64bit]//
//[ 1.619945] pci 0000:02:00.0: BAR 10: assigned [mem
0xf00e4000-0xf0103fff 64bit]//
//[ 1.627489] pci 0000:02:00.1: BAR 3: assigned [mem
0xf0104000-0xf0107fff]//
//[ 1.634375] pci 0000:02:00.1: BAR 7: assigned [mem
0xf0108000-0xf0127fff 64bit]//
//[ 1.641812] pci 0000:02:00.1: BAR 10: assigned [mem
0xf0128000-0xf0147fff 64bit]//
//[ 1.649336] pci 0000:00:04.0: PCI bridge to [bus 02]//
//[ 1.654395] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]//
//[ 1.660582] pci 0000:00:04.0: bridge window [mem
0xf0000000-0xf01fffff]//
//[ 1.667466] pci 0000:00:14.4: PCI bridge to [bus 01]//
//[ 1.672546] pci 0000:00:14.4: bridge window [mem
0xfdf00000-0xfe7fffff]//
//[ 1.679425] pci 0000:00:14.4: bridge window [mem
0xfb000000-0xfbffffff pref]//
//[ 1.686946] NET: Registered protocol family 2//
//[ 1.691800] TCP established hash table entries: 524288 (order: 10,
4194304 bytes)//
//[ 1.700946] TCP bind hash table entries: 65536 (order: 8, 1048576
bytes)//
//[ 1.708067] TCP: Hash tables configured (established 524288 bind
65536)//
//[ 1.714953] UDP hash table entries: 65536 (order: 9, 2097152 bytes)//
//[ 1.722088] UDP-Lite hash table entries: 65536 (order: 9, 2097152
bytes)//
//[ 1.729799] NET: Registered protocol family 1//
//[ 2.828369] pci 0000:01:04.0: Video device with shadowed ROM at
[mem 0x000c0000-0x000dffff]//
//[ 2.836939] Unpacking initramfs...//
//[ 5.312276] Freeing initrd memory: 188180K//
//[ 5.317863] PCI-DMA: Disabling AGP.//
//[ 5.321576] PCI-DMA: aperture base @ d4000000 size 65536 KB//
//[ 5.327257] PCI-DMA: using GART IOMMU.//
//[ 5.331095] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture//
//[ 5.342232] amd_uncore: AMD NB counters detected//
//[ 5.348108] LVT offset 0 assigned for vector 0x400//
//[ 5.353586] perf: AMD IBS detected (0x000000ff)//
//[ 5.358292] Scanning for low memory corruption every 60 seconds//
//[ 5.365646] Initialise system trusted keyrings//
//[ 5.370192] Key type blacklist registered//
//[ 5.374534] workingset: timestamp_bits=36 max_order=26 bucket_order=0//
//[ 5.382679] zbud: loaded//
//[ 5.386436] squashfs: version 4.0 (2009/01/31) Phillip Lougher//
//[ 5.392651] fuse init (API version 7.26)//
//[ 5.399404] Key type asymmetric registered//
//[ 5.403603] Asymmetric key parser 'x509' registered//
//[ 5.408634] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 246)//
//[ 5.416299] io scheduler noop registered//
//[ 5.420308] io scheduler deadline registered//
//[ 5.424715] io scheduler cfq registered (default)//
//[ 5.430865] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0//
//[ 5.439357] ACPI: Power Button [PWRB]//
//[ 5.443157] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1//
//[ 5.450737] ACPI: Power Button [PWRF]//
//[ 5.459386] ERST: Failed to get Error Log Address Range.//
//[ 5.464884] [Firmware Warn]: GHES: Poll interval is 0 for generic
hardware error source: 1, disabled.//
//[ 5.474255] GHES: Failed to enable APEI firmware first mode.//
//[ 5.480181] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled//
//[ 5.507172] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200)
is a 16550A//
//[ 5.535218] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200)
is a 16550A//
//[ 5.545306] Linux agpgart interface v0.103//
//[ 5.556356] loop: module loaded//
//[ 5.559855] libphy: Fixed MDIO Bus: probed//
//[ 5.564077] tun: Universal TUN/TAP device driver, 1.6//
//[ 5.569275] PPP generic driver version 2.4.2//
//[ 5.573693] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver//
//[ 5.580323] ehci-pci: EHCI PCI platform driver//
//[ 5.585107] ehci-pci 0000:00:12.2: EHCI Host Controller//
//[ 5.590447] ehci-pci 0000:00:12.2: new USB bus registered, assigned
bus number 1//
//[ 5.597972] ehci-pci 0000:00:12.2: applying AMD
SB700/SB800/Hudson-2/3 EHCI dummy qh workaround//
//[ 5.606830] ehci-pci 0000:00:12.2: debug port 1//
//[ 5.611503] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe8fa800//
//[ 5.632043] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00//
//[ 5.637945] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002//
//[ 5.644832] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1//
//[ 5.652175] usb usb1: Product: EHCI Host Controller//
//[ 5.657142] usb usb1: Manufacturer: Linux 4.15.0-101-generic ehci_hcd//
//[ 5.663674] usb usb1: SerialNumber: 0000:00:12.2//
//[ 5.668534] hub 1-0:1.0: USB hub found//
//[ 5.672382] hub 1-0:1.0: 6 ports detected//
//[ 5.676838] ehci-pci 0000:00:13.2: EHCI Host Controller//
//[ 5.682164] ehci-pci 0000:00:13.2: new USB bus registered, assigned
bus number 2//
//[ 5.689698] ehci-pci 0000:00:13.2: applying AMD
SB700/SB800/Hudson-2/3 EHCI dummy qh workaround//
//[ 5.698531] ehci-pci 0000:00:13.2: debug port 1//
//[ 5.703188] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe8fac00//
//[ 5.724043] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00//
//[ 5.729933] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0002//
//[ 5.736820] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1//
//[ 5.744160] usb usb2: Product: EHCI Host Controller//
//[ 5.749128] usb usb2: Manufacturer: Linux 4.15.0-101-generic ehci_hcd//
//[ 5.755687] usb usb2: SerialNumber: 0000:00:13.2//
//[ 5.760520] hub 2-0:1.0: USB hub found//
//[ 5.764370] hub 2-0:1.0: 6 ports detected//
//[ 5.768679] ehci-platform: EHCI generic platform driver//
//[ 5.774012] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver//
//[ 5.780305] ohci-pci: OHCI PCI platform driver//
//[ 5.784989] ohci-pci 0000:00:12.0: OHCI PCI host controller//
//[ 5.790666] ohci-pci 0000:00:12.0: new USB bus registered, assigned
bus number 3//
//[ 5.798213] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe8f6000//
//[ 5.868079] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0001//
//[ 5.874965] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1//
//[ 5.882313] usb usb3: Product: OHCI PCI host controller//
//[ 5.887627] usb usb3: Manufacturer: Linux 4.15.0-101-generic ohci_hcd//
//[ 5.894158] usb usb3: SerialNumber: 0000:00:12.0//
//[ 5.899025] hub 3-0:1.0: USB hub found//
//[ 5.902877] hub 3-0:1.0: 3 ports detected//
//[ 5.907251] ohci-pci 0000:00:12.1: OHCI PCI host controller//
//[ 5.912925] ohci-pci 0000:00:12.1: new USB bus registered, assigned
bus number 4//
//[ 5.920459] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe8f7000//
//[ 5.988126] usb usb4: New USB device found, idVendor=1d6b,
idProduct=0001//
//[ 5.995015] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1//
//[ 6.002357] usb usb4: Product: OHCI PCI host controller//
//[ 6.007672] usb usb4: Manufacturer: Linux 4.15.0-101-generic ohci_hcd//
//[ 6.014214] usb usb4: SerialNumber: 0000:00:12.1//
//[ 6.019051] hub 4-0:1.0: USB hub found//
//[ 6.022897] hub 4-0:1.0: 3 ports detected//
//[ 6.027274] ohci-pci 0000:00:13.0: OHCI PCI host controller//
//[ 6.032966] ohci-pci 0000:00:13.0: new USB bus registered, assigned
bus number 5//
//[ 6.040512] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe8f8000//
//[ 6.108123] usb usb5: New USB device found, idVendor=1d6b,
idProduct=0001//
//[ 6.115009] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1//
//[ 6.122348] usb usb5: Product: OHCI PCI host controller//
//[ 6.127666] usb usb5: Manufacturer: Linux 4.15.0-101-generic ohci_hcd//
//[ 6.134206] usb usb5: SerialNumber: 0000:00:13.0//
//[ 6.139040] hub 5-0:1.0: USB hub found//
//[ 6.142890] hub 5-0:1.0: 3 ports detected//
//[ 6.147332] ohci-pci 0000:00:13.1: OHCI PCI host controller//
//[ 6.153007] ohci-pci 0000:00:13.1: new USB bus registered, assigned
bus number 6//
//[ 6.160541] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe8f9000//
//[ 6.228089] usb usb6: New USB device found, idVendor=1d6b,
idProduct=0001//
//[ 6.234997] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1//
//[ 6.242364] usb usb6: Product: OHCI PCI host controller//
//[ 6.247684] usb usb6: Manufacturer: Linux 4.15.0-101-generic ohci_hcd//
//[ 6.254222] usb usb6: SerialNumber: 0000:00:13.1//
//[ 6.259103] hub 6-0:1.0: USB hub found//
//[ 6.262950] hub 6-0:1.0: 3 ports detected//
//[ 6.267364] ohci-pci 0000:00:14.5: OHCI PCI host controller//
//[ 6.273034] ohci-pci 0000:00:14.5: new USB bus registered, assigned
bus number 7//
//[ 6.280566] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe8fb000//
//[ 6.348075] usb usb7: New USB device found, idVendor=1d6b,
idProduct=0001//
//[ 6.354967] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1//
//[ 6.362308] usb usb7: Product: OHCI PCI host controller//
//[ 6.364111] tsc: Refined TSC clocksource calibration: 2599.997 MHz//
//[ 6.367625] usb usb7: Manufacturer: Linux 4.15.0-101-generic ohci_hcd//
//[ 6.374032] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x257a391c223, max_idle_ns: 440795220104 ns//
//[ 6.380483] usb usb7: SerialNumber: 0000:00:14.5//
//[ 6.395469] hub 7-0:1.0: USB hub found//
//[ 6.399314] hub 7-0:1.0: 2 ports detected//
//[ 6.403616] ohci-platform: OHCI generic platform driver//
//[ 6.408967] uhci_hcd: USB Universal Host Controller Interface driver//
//[ 6.415480] i8042: PNP: No PS/2 controller found.//
//[ 6.420276] i8042: Probing ports directly.//
//[ 6.427239] serio: i8042 KBD port at 0x60,0x64 irq 1//
//[ 6.432378] serio: i8042 AUX port at 0x60,0x64 irq 12//
//[ 6.437699] mousedev: PS/2 mouse device common for all mice//
//[ 6.443584] rtc_cmos 00:02: RTC can wake from S4//
//[ 6.448420] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0//
//[ 6.454639] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes
nvram, hpet irqs//
//[ 6.462424] i2c /dev entries driver//
//[ 6.466439] device-mapper: uevent: version 1.0.3//
//[ 6.471288] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20)
initialised: dm-de...@redhat.com//
//[ 6.480810] ledtrig-cpu: registered to indicate activity on CPUs//
//[ 6.487408] x86/pm: family 0x15 cpu detected, MSR saving is needed
during suspending.//
//[ 6.496126] NET: Registered protocol family 10//
//[ 6.505221] Segment Routing with IPv6//
//[ 6.509034] NET: Registered protocol family 17//
//[ 6.513745] Key type dns_resolver registered//
//[ 6.518105] mce: Unable to init MCE device (rc: -5)//
//[ 6.523217] mce: Using 0 MCE banks//
//[ 6.526741] RAS: Correctable Errors collector initialized.//
//[ 6.532360] microcode: CPU0: patch_level=0x00000000//
//[ 6.536103] usb 5-3: new full-speed USB device number 2 using
ohci-pci//
//[ 6.537351] microcode: CPU1: patch_level=0x00000000//
//[ 6.548959] microcode: CPU2: patch_level=0x00000000//
//[ 6.553932] microcode: CPU3: patch_level=0x00000000//
//[ 6.558977] microcode: CPU4: patch_level=0x00000000//
//[ 6.563952] microcode: CPU5: patch_level=0x00000000//
//[ 6.568975] microcode: CPU6: patch_level=0x00000000//
//[ 6.573960] microcode: CPU7: patch_level=0x00000000//
//[ 6.578975] microcode: CPU8: patch_level=0x00000000//
//[ 6.583958] microcode: CPU9: patch_level=0x00000000//
//[ 6.588976] microcode: CPU10: patch_level=0x00000000//
//[ 6.594041] microcode: CPU11: patch_level=0x00000000//
//[ 6.599166] microcode: CPU12: patch_level=0x00000000//
//[ 6.604238] microcode: CPU13: patch_level=0x00000000//
//[ 6.609348] microcode: CPU14: patch_level=0x00000000//
//[ 6.614417] microcode: CPU15: patch_level=0x00000000//
//[ 6.619522] microcode: CPU16: patch_level=0x00000000//
//[ 6.624591] microcode: CPU17: patch_level=0x00000000//
//[ 6.629698] microcode: CPU18: patch_level=0x00000000//
//[ 6.634760] microcode: CPU19: patch_level=0x00000000//
//[ 6.639862] microcode: CPU20: patch_level=0x00000000//
//[ 6.644927] microcode: CPU21: patch_level=0x00000000//
//[ 6.650030] microcode: CPU22: patch_level=0x00000000//
//[ 6.655116] microcode: CPU23: patch_level=0x00000000//
//[ 6.660228] microcode: Microcode Update Driver: v2.2.//
//[ 6.660239] sched_clock: Marking stable (6660219767,
0)->(6759337194, -99117427)//
//[ 6.673688] registered taskstats version 1//
//[ 6.677886] Loading compiled-in X.509 certificates//
//[ 6.685082] Loaded X.509 cert 'Build time autogenerated kernel key:
81757e40860ca54b8a45e323b66799c03c91a344'//
//[ 6.695171] zswap: loaded using pool lzo/zbud//
//[ 6.702834] Key type big_key registered//
//[ 6.706765] Key type trusted registered//
//[ 6.712034] Key type encrypted registered//
//[ 6.716147] AppArmor: AppArmor sha1 policy hashing enabled//
//[ 6.721725] ima: No TPM chip found, activating TPM-bypass! (rc=-19)//
//[ 6.728108] ima: Allocated hash algorithm: sha1//
//[ 6.732746] evm: HMAC attrs: 0x1//
//[ 6.736560] APEI: Can not request [mem 0xdfead270-0xdfead2c3] for
APEI BERT registers//
//[ 6.744530] Magic number: 4:548:174//
//[ 6.748372] acpi device:0a: hash matches//
//[ 6.752521] rtc_cmos 00:02: setting system clock to 2020-05-25
10:10:06 UTC (1590401406)//
//[ 6.762007] acpi_cpufreq: overriding BIOS provided _PSD data//
//[ 6.767223] usb 5-3: New USB device found, idVendor=0557,
idProduct=2221//
//[ 6.778844] usb 5-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0//
//[ 6.780153] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found//
//[ 6.786083] usb 5-3: Product: Hermon USB hidmouse Device//
//[ 6.792190] EDD information not available.//
//[ 6.797603] usb 5-3: Manufacturer: Winbond Electronics Corp//
//[ 7.261526] Freeing unused kernel image memory: 2432K//
//[ 7.272037] Write protecting the kernel read-only data: 20480k//
//[ 7.280167] Freeing unused kernel image memory: 2008K//
//[ 7.286259] Freeing unused kernel image memory: 1876K//
//[ 7.301648] x86/mm: Checked W+X mappings: passed, no W+X pages found.//
//[ 7.317263] pps_core: LinuxPPS API ver. 1 registered//
//[ 7.322344] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giome...@linux.it>//
//[ 7.334051] PTP clock support registered//
//[ 7.341334] dca service started, version 1.12.1//
//[ 7.352652] igb: Intel(R) Gigabit Ethernet Network Driver - version
5.4.0-k//
//[ 7.359709] igb: Copyright (c) 2007-2014 Intel Corporation.//
//[ 7.420254] clocksource: Switched to clocksource tsc//
//[ 7.578889] igb 0000:02:00.0: added PHC on eth0//
//[ 7.583511] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network
Connection//
//[ 7.590475] igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x4)
00:25:90:af:c7:d6//
//[ 7.597747] igb 0000:02:00.0: eth0: PBA No: Unknown//
//[ 7.602716] igb 0000:02:00.0: Using MSI-X interrupts. 8 rx
queue(s), 8 tx queue(s)//
//[ 7.820947] igb 0000:02:00.1: added PHC on eth1//
//[ 7.825565] igb 0000:02:00.1: Intel(R) Gigabit Ethernet Network
Connection//
//[ 7.832530] igb 0000:02:00.1: eth1: (PCIe:2.5Gb/s:Width x4)
00:25:90:af:c7:d7//
//[ 7.839795] igb 0000:02:00.1: eth1: PBA No: Unknown//
//[ 7.844772] igb 0000:02:00.1: Using MSI-X interrupts. 8 rx
queue(s), 8 tx queue(s)//
//[ 7.854732] MCE: In-kernel MCE decoding enabled.//
//[ 7.861719] EDAC amd64: Node 0: DRAM ECC enabled.//
//[ 7.866518] EDAC amd64: ECC disabled in the BIOS or no ECC
capability, module will not load.//
//[ 7.866518] Either enable ECC checking or force module loading by
setting 'ecc_enable_override'.//
//[ 7.866518] (Note that use of the override may cause unknown side
effects.)//
//[ 7.891168] EDAC amd64: Node 1: DRAM ECC enabled.//
//[ 7.895979] EDAC amd64: ECC disabled in the BIOS or no ECC
capability, module will not load.//
//[ 7.895979] Either enable ECC checking or force module loading by
setting 'ecc_enable_override'.//
//[ 7.895979] (Note that use of the override may cause unknown side
effects.)//
//[ 7.920613] EDAC amd64: Node 2: DRAM ECC enabled.//
//[ 7.925405] EDAC amd64: ECC disabled in the BIOS or no ECC
capability, module will not load.//
//[ 7.925405] Either enable ECC checking or force module loading by
setting 'ecc_enable_override'.//
//[ 7.925405] (Note that use of the override may cause unknown side
effects.)//
//[ 7.951615] EDAC amd64: Node 3: DRAM ECC enabled.//
//[ 7.956428] EDAC amd64: ECC disabled in the BIOS or no ECC
capability, module will not load.//
//[ 7.956428] Either enable ECC checking or force module loading by
setting 'ecc_enable_override'.//
//[ 7.956428] (Note that use of the override may cause unknown side
effects.)//
//[ 8.017895] EDAC amd64: Node 0: DRAM ECC enabled.//
//[ 8.022714] EDAC amd64: ECC disabled in the BIOS or no ECC
capability, module will not load.//
//[ 8.022714] Either enable ECC checking or force module loading by
setting 'ecc_enable_override'.//
//[ 8.022714] (Note that use of the override may cause unknown side
effects.)//
//[ 8.047333] EDAC amd64: Node 1: DRAM ECC enabled.//
//[ 8.052123] EDAC amd64: ECC disabled in the BIOS or no ECC
capability, module will not load.//
//[ 8.052123] Either enable ECC checking or force module loading by
setting 'ecc_enable_override'.//
//[ 8.052123] (Note that use of the override may cause unknown side
effects.)//
//[ 8.076731] EDAC amd64: Node 2: DRAM ECC enabled.//
//[ 8.081525] EDAC amd64: ECC disabled in the BIOS or no ECC
capability, module will not load.//
//[ 8.081525] Either enable ECC checking or force module loading by
setting 'ecc_enable_override'.//
//[ 8.081525] (Note that use of the override may cause unknown side
effects.)//
//[ 8.106131] EDAC amd64: Node 3: DRAM ECC enabled.//
//[ 8.110924] EDAC amd64: ECC disabled in the BIOS or no ECC
capability, module will not load.//
//[ 8.110924] Either enable ECC checking or force module loading by
setting 'ecc_enable_override'.//
//[ 8.110924] (Note that use of the override may cause unknown side
effects.)//
//[ 8.486601] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready//
//[ 10.496514] igb 0000:02:00.0 eth0: igb: eth0 NIC Link is Up 1000
Mbps Full Duplex, Flow Control: RX//
//[ 10.505935] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready//
//[ 11.367328] random: fast init done//
//[ 12.513452] random: crng init done
/
other nodes with different hardware go with the image, KVM also works.
Thanks for the help/.
/Best
Mario Luettich
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
