Hi ddj, Yes I’m pulling a few nodes from the prod cluster, I did makedhcp -d nodename and this sort of helped
It does a pxe boot, but still picks up the prod xcat server address xcatprobe detect_dhcpd -i <MN interface name> -m <node's mac address> Server: XX.XX.X.XXX assign IP [XX.XX.X.XXX]. The next server is [XX.XX.X.XXX]! [INFO] <----- this is the prod xcat server, how do I remove this?? Server: XX.XX.X.XXX assign IP [ZZ.ZZ.Z.ZZZ]. The next server is [ZZ.ZZ.Z.ZZZ]! [INFO] <- THIS IS THE NEW TEST XCAT SERVER Is there any way to remove this, will this help? JR From: David D Johnson <david_john...@brown.edu> Sent: 27 May 2020 12:23 To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net> Subject: Re: [xcat-user] PXE-E18: Server response timeout. When you have two dhcp servers on the same wire/subnet, need to make sure that the MAC address is only recognized by one of them. If the "production" server is running xcat, use makedhcp -d nodename to get rid of the association over there, and presume (or check, with makedhcp -q nodename) that it's registered in your new cluster. My guess is that you pulled out a compute node from the production cluster to play with. -- ddj On May 27, 2020, at 5:08 AM, John Roche <john.ro...@crick.ac.uk<mailto:john.ro...@crick.ac.uk>> wrote: [A[root@xcat-test ~]# xcatprobe xcatmn -i eth0 [mn]: Checking all xCAT daemons are running... [ OK ] [mn]: Checking xcatd can receive command request... [ OK ] [mn]: Checking 'site' table is configured... [ OK ] [mn]: Checking provision network is configured... [ OK ] [mn]: Checking 'passwd' table is configured... [ OK ] [mn]: Checking important directories(installdir,tftpdir) are configured... [ OK ] [mn]: Checking SELinux is disabled... [ OK ] [mn]: Checking HTTP service is configured... [ OK ] [mn]: Checking TFTP service is configured... [ OK ] [mn]: Checking DNS service is configured... [ OK ] [mn]: Checking DHCP service is configured... [ OK ] [mn]: Checking NTP service is configured... [ OK ] [mn]: Checking rsyslog service is configured... [ OK ] [mn]: Checking firewall is disabled... [ OK ] [mn]: Checking minimum disk space for xCAT ['/var' needs 1GB;'/install' needs 10GB;'/tmp' needs 1GB]... [ OK ] [mn]: Checking Linux ulimits configuration... [ OK ] [mn]: Checking network kernel parameter configuration... [ OK ] [mn]: Checking xCAT daemon attributes configuration... [ OK ] [mn]: Checking xCAT log is stored in /var/log/xcat/cluster.log... [ OK ] [mn]: Checking xCAT management node IP: <10.28.9.183> is configured to static... [ OK ] [mn]: Checking dhcpd.leases file is less than 100M... [ OK ] =================================== SUMMARY ==================================== [MN]: Checking on MN... [ OK ] That’s all good xcatprobe detect_dhcpd -i <MN interface name> -m <node's mac address> Start to detect DHCP, please wait 10 seconds [INFO] ++++++++++++++++++++++++++++++++++ [INFO] There are 3 servers replied to dhcp discover. [INFO] Server: XX.XX.X.XXX assign IP [XX.XX.X.XXX]. The next server is [XX.XX.X.XXX]! [INFO] <----- this is the prod xcat server, how do I remove this?? Server: XX.XX.X.XXX assign IP [ZZ.ZZ.Z.ZZZ]. The next server is [ZZ.ZZ.Z.ZZZ]! [INFO] <- THIS IS THE NEW TEST XCAT SERVER Server:JJ.JJ.JJ.J assign IP [JJ.JJ.J.J]. The next server is [ZZ.ZZ.Z.ZZZ]! [INFO] ++++++++++++++++++++++++++++++++++ [INFO] [root@xcat-test ~]# From: Casandra H Qiu <cxh...@us.ibm.com<mailto:cxh...@us.ibm.com>> Sent: 26 May 2020 17:17 To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net<mailto:xcat-user@lists.sourceforge.net>> Subject: Re: [xcat-user] PXE-E18: Server response timeout. try those two command to diagnosis if there are configure issues xcatprobe xcatmn -i <MN interface name> xcatprobe detect_dhcpd -i <MN interface name> -m <node's mac address> Thanks, Casandra Qiu ................................................................... Casandra Hong Qiu Phone: (845) 433-9291, t/l 293-9291 Office: Building 8, 3-B-04 cxh...@us.ibm.com<mailto:cxh...@us.ibm.com> <image001.gif>John Roche ---05/26/2020 12:11:36 PM---Tried this No luck From: John Roche <john.ro...@crick.ac.uk<mailto:john.ro...@crick.ac.uk>> To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net<mailto:xcat-user@lists.sourceforge.net>> Date: 05/26/2020 12:11 PM Subject: Re: [xcat-user] [External] PXE-E18: Server response timeout. ________________________________ Tried this No luck How did people set up the dhpc part for doing a pxe boot? John From: Jarrod Johnson <jjohns...@lenovo.com<mailto:jjohns...@lenovo.com>> Sent: 22 May 2020 17:25 To: xCAT-user@lists.sourceforge.net<mailto:xCAT-user@lists.sourceforge.net> Subject: Re: [xcat-user] [External] PXE-E18: Server response timeout. Hmm, nodeset <nodename> stat Rinstall thould have taken care of that, but checking... ________________________________ From: John Roche <john.ro...@crick.ac.uk<mailto:john.ro...@crick.ac.uk>> Sent: Friday, May 22, 2020 8:40 AM To: xCAT-user@lists.sourceforge.net<mailto:xCAT-user@lists.sourceforge.net> <xCAT-user@lists.sourceforge.net<mailto:xCAT-user@lists.sourceforge.net>> Subject: [External] [xcat-user] PXE-E18: Server response timeout. Hi, I recently build an xcat server Rpower works But doing an rinstall, it keeps failing at the PXE boot I’m doing rinstal <node name> -u It uses UEFI I’m starting to pull my hair now on what’s the issue Here is the error I see when I’m doing an rcons. Thanks Boot Failed - PXE Network: PciRoot(0x0)/Pci(0x2,0x0)/Pci(0x0,0x0)/Ctrl(0x1)/MAC(E41D2DDE7931,0x0)/IPv4(0.0.0.0,0x0,DHCP,0.0.0.0,0.0.0.0,0.0.0.0) >>Start PXE over IPv4. PXE-E18: Server response timeout. >>Start PXE over IPv4. PXE-E18: Server response timeout. Boot Failed - PXE Network: PciRoot(0x0)/Pci(0x2,0x0)/Pci(0x0,0x0)/Ctrl(0x2)/MAC(E41D2DDE7932,0x0)/IPv4(0.0.0.0,0x0,DHCP,0.0.0.0,0.0.0.0,0.0.0.0) >>Start PXE over IPv4. The Francis Crick Institute Limited is a registered charity in England and Wales no. 1140062 and a company registered in England and Wales no. 06885462, with its registered office at 1 Midland Road London NW1 1AT The Francis Crick Institute Limited is a registered charity in England and Wales no. 1140062 and a company registered in England and Wales no. 06885462, with its registered office at 1 Midland Road London NW1 1AT_______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net<mailto:xCAT-user@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/xcat-user<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.sourceforge.net%2Flists%2Flistinfo%2Fxcat-user&data=02%7C01%7C%7Cab0c8f1762cb4a430d0c08d80238fb08%7C4eed7807ebad415aa7a99170947f4eae%7C0%7C0%7C637261791048773760&sdata=CCAkXvkrEBoPQzuIyr1GycH48Kbt%2FbQnoQ7k%2Fxn6Evo%3D&reserved=0> The Francis Crick Institute Limited is a registered charity in England and Wales no. 1140062 and a company registered in England and Wales no. 06885462, with its registered office at 1 Midland Road London NW1 1AT _______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net<mailto:xCAT-user@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/xcat-user<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.sourceforge.net%2Flists%2Flistinfo%2Fxcat-user&data=02%7C01%7C%7Cab0c8f1762cb4a430d0c08d80238fb08%7C4eed7807ebad415aa7a99170947f4eae%7C0%7C0%7C637261791048783753&sdata=6JTm7OBdzCDiJQeCJtJ%2FW6%2FhLomLFZl%2FpuHczrA26zQ%3D&reserved=0> The Francis Crick Institute Limited is a registered charity in England and Wales no. 1140062 and a company registered in England and Wales no. 06885462, with its registered office at 1 Midland Road London NW1 1AT
_______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user