I suspect this is probably because there is no "mask" attribute defined for
"mgtnet" network.
The xcatproble code calls probe_utils.pm->is_ip_belong_to_net().
And there it tests "return 0 if ($mask !~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)$/);"

Mark Gurevich
Poughkeepsie Development Lab
HPC Software Development - xCAT

"If we knew what it was we were doing, it would not be called research,
would it?"
--Albert Einstein





From:   "Stagneth, Andre" <andre.stagn...@dxc.com>
To:     "xCAT Users Mailing list" <xcat-user@lists.sourceforge.net>
Date:   11/04/2021 03:58 PM
Subject:        [EXTERNAL] Re: [xcat-user] xcatprobe NIC issue



It is xcat 2.14.6


Von: Mark Gurevich <gurev...@us.ibm.com>
Gesendet: Donnerstag, 4. November 2021, 20:20
An: xCAT Users Mailing list
Betreff: Re: [xcat-user] xcatprobe NIC issue



Which version of xCAT ?

Mark Gurevich
Poughkeepsie Development Lab
HPC Software Development - xCAT

"If we knew what it was we were doing, it would not be called research,
would it?"
--Albert Einstein



Inactive hide details for "Stagneth, Andre" ---11/04/2021 02:54:13 PM---Hi,
Can't find what's wrong. Any ideas?"Stagneth, Andre" ---11/04/2021 02:54:13
PM---Hi, Can't find what's wrong. Any ideas?

From: "Stagneth, Andre" <andre.stagn...@dxc.com>
To: "xCAT Users Mailing list" <xcat-user@lists.sourceforge.net>
Date: 11/04/2021 02:54 PM
Subject: [EXTERNAL] [xcat-user]  xcatprobe NIC issue





Hi,

Can’t find what’s wrong. Any ideas?

# xcatprobe xcatmn -i eth0 -V
[mn]: Checking all xCAT daemons are running... [ OK ]
[mn]: Checking xcatd can receive command request... [ OK ]
[mn]: Checking 'site' table is configured... [ OK ]
[mn]: Checking provision network is configured... [FAIL]
[mn]: There isn't NIC 'eth0' in current server
[mn]: IP of eth0 doesn't belong to any network defined in 'networks' table
=================================== SUMMARY
====================================
[MN]: Checking on MN... [FAIL]
Checking provision network is configured... [FAIL]
There isn't NIC 'eth0' in current server
IP of eth0 doesn't belong to any network defined in 'networks' table

But eth0 is present:
# ip a | grep eth0 -A1
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen
1000
link/ether 8c:dc:d4:aa:c1:a0 brd ff:ff:ff:ff:ff:ff
inet 172.18.10.51/16 brd 172.18.255.255 scope global eth0
inet6 fe80::8edc:d4ff:feaa:c1a0/64 scope link
valid_lft forever preferred_lft forever

And network is configured too:
# lsdef -t network -o mgtnet
Object name: mgtnet
ddnsdomain=rolls-royce.local
dhcpserver=172.18.10.51
dynamicrange=172.18.254.200-172.18.254.250
mgtifname=eth0
nameservers=172.18.10.51
net=172.18.0.0/16
ntpservers=172.18.10.51
tftpserver=172.18.10.51

see site configuration too:
# lsdef -t site -o clustersite
Object name: clustersite
SNsyncfiledir=/var/xcat/syncfiles
blademaxp=64
cleanupxcatpost=yes
consoleondemand=yes
databaseloc=/var/lib
db2installloc=/mntdb2
dhcpinterfaces=eth0,eth1
dnshandler=ddns
domain=xxx.local
enableASMI=no
fsptimeout=0
gateway=172.18.10.0
installdir=/install
ipmimaxp=64
ipmiretries=3
ipmitimeout=2
master=172.18.10.51
maxssh=8
nameservers=172.18.0.1
powerinterval=0
ppcmaxp=64
ppcretry=3
ppctimeout=0
sharedtftp=1
site=RRUK
sshbetweennodes=ALLGROUPS
syspowerinterval=0
tftpdir=/tftpboot
timezone=Europe/London
useNmapfromMN=yes
vsftp=y
xcatconfdir=/etc/xcat
xcatdport=3001
xcatiport=3002

Regards,
André



EntServ Deutschland GmbH: Schickardstraße 32, 71034 Böblingen, Germany -
Board of Directors: Joachim Löffler (Chairman) - Registered in Stuttgart:
HRB 757510..
DXC Technology Company -- This message is transmitted to you by or on
behalf of DXC Technology Company or one of its affiliates. It is intended
exclusively for the addressee. The substance of this message, along with
any attachments, may contain proprietary, confidential or privileged
information or information that is otherwise legally exempt from
disclosure. Any unauthorized review, use, disclosure or distribution is
prohibited. If you are not the intended recipient of this message, you are
not authorized to read, print, retain, copy or disseminate any part of this
message. If you have received this message in error, please destroy and
delete all copies and notify the sender by return e-mail. Regardless of
content, this e-mail shall not operate to bind DXC Technology Company or
any of its affiliates to any order or other contract unless pursuant to
explicit written agreement or government initiative expressly permitting
the use of e-mail for such purpose. --.
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user






_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user







_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user

Reply via email to