Andre,
Thanks for the data.
It looks like the output of "ip -4 -o a" is different from what we are
expecting.
What OS are you running ?
What is the output of "ip -4 a" ?
Mark Gurevich
Poughkeepsie Development Lab
HPC Software Development - xCAT
"If we knew what it was we were doing, it would not be called research,
would it?"
--Albert Einstein
From: "Stagneth, Andre" <andre.stagn...@dxc.com>
To: "xCAT Users Mailing list" <xcat-user@lists.sourceforge.net>
Date: 11/05/2021 08:06 AM
Subject: [EXTERNAL] Re: [xcat-user] xcatprobe NIC issue
Here it is:
# ip -4 -o a
1: lo inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
1: lo inet 127.0.0.2/8 brd 127.255.255.255 scope host secondary lo
2: eth0 inet 172.18.10.51/16 brd 172.18.255.255 scope global eth0
3: eth1 inet 172.19.0.51/16 brd 172.19.255.255 scope global eth1
7: ib0 inet 172.20.10.51/16 brd 172.20.255.255 scope global ib0
From: Mark Gurevich <gurev...@us.ibm.com>
Sent: Donnerstag, 4. November 2021 22:20
To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net>
Subject: Re: [xcat-user] xcatprobe NIC issue
What do you get when you run "ip -4 -o a" ?
Another possibility is here:
my $nics = `ip -4 -o a|grep '$installnic\\\\' >/dev/null 2>&1`;
if ($?) {
push @$error_ref, "There isn't NIC '$installnic' in current
server";
$rst = 1;
} else {
Mark Gurevich
Poughkeepsie Development Lab
HPC Software Development - xCAT
"If we knew what it was we were doing, it would not be called research,
would it?"
--Albert Einstein
Inactive hide details for "Stagneth, Andre" ---11/04/2021 04:45:52 PM---We
try both: net=172.18.0.0/16 without mask"Stagneth, Andre" ---11/04/2021
04:45:52 PM---We try both: net=172.18.0.0/16 without mask
From: "Stagneth, Andre" <andre.stagn...@dxc.com>
To: "xCAT Users Mailing list" <xcat-user@lists.sourceforge.net>
Date: 11/04/2021 04:45 PM
Subject: [EXTERNAL] Re: [xcat-user] xcatprobe NIC issue
We try both:
net=172.18.0.0/16 without mask
and also
net=172.18.0.0 and mask=255.255.0.0
But same result. The second mentioned was our first try. But after it does
not work we try use the /16 notation.
I am wondering about eth0 is not a NIC.
Holen Sie sich Outlook für Android
From: Mark Gurevich <gurev...@us.ibm.com>
Sent: Thursday, November 4, 2021 9:15:03 PM
To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net>
Subject: Re: [xcat-user] xcatprobe NIC issue
I suspect this is probably because there is no "mask" attribute defined for
"mgtnet" network.
The xcatproble code calls probe_utils.pm->is_ip_belong_to_net().
And there it tests "return 0 if ($mask !~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)$/);"
Mark Gurevich
Poughkeepsie Development Lab
HPC Software Development - xCAT
"If we knew what it was we were doing, it would not be called research,
would it?"
--Albert Einstein
Inactive hide details for "Stagneth, Andre" ---11/04/2021 03:58:45 PM---It
is xcat 2.14.6 ________________________________"Stagneth, Andre"
---11/04/2021 03:58:45 PM---It is xcat 2.14.6
________________________________
From: "Stagneth, Andre" <andre.stagn...@dxc.com>
To: "xCAT Users Mailing list" <xcat-user@lists.sourceforge.net>
Date: 11/04/2021 03:58 PM
Subject: [EXTERNAL] Re: [xcat-user] xcatprobe NIC issue
It is xcat 2.14.6
Von: Mark Gurevich <gurev...@us.ibm.com>
Gesendet: Donnerstag, 4. November 2021, 20:20
An: xCAT Users Mailing list
Betreff: Re: [xcat-user] xcatprobe NIC issue
Which version of xCAT ?
Mark Gurevich
Poughkeepsie Development Lab
HPC Software Development - xCAT
"If we knew what it was we were doing, it would not be called research,
would it?"
--Albert Einstein
Inactive hide details for "Stagneth, Andre" ---11/04/2021 02:54:13 PM---Hi,
Can't find what's wrong. Any ideas?"Stagneth, Andre" ---11/04/2021 02:54:13
PM---Hi, Can't find what's wrong. Any ideas?
From: "Stagneth, Andre" <andre.stagn...@dxc.com>
To: "xCAT Users Mailing list" <xcat-user@lists.sourceforge.net>
Date: 11/04/2021 02:54 PM
Subject: [EXTERNAL] [xcat-user] xcatprobe NIC issue
Hi,
Can’t find what’s wrong. Any ideas?
# xcatprobe xcatmn -i eth0 -V
[mn]: Checking all xCAT daemons are running... [ OK ]
[mn]: Checking xcatd can receive command request... [ OK ]
[mn]: Checking 'site' table is configured... [ OK ]
[mn]: Checking provision network is configured... [FAIL]
[mn]: There isn't NIC 'eth0' in current server
[mn]: IP of eth0 doesn't belong to any network defined in 'networks' table
=================================== SUMMARY
====================================
[MN]: Checking on MN... [FAIL]
Checking provision network is configured... [FAIL]
There isn't NIC 'eth0' in current server
IP of eth0 doesn't belong to any network defined in 'networks' table
But eth0 is present:
# ip a | grep eth0 -A1
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen
1000
link/ether 8c:dc:d4:aa:c1:a0 brd ff:ff:ff:ff:ff:ff
inet 172.18.10.51/16 brd 172.18.255.255 scope global eth0
inet6 fe80::8edc:d4ff:feaa:c1a0/64 scope link
valid_lft forever preferred_lft forever
And network is configured too:
# lsdef -t network -o mgtnet
Object name: mgtnet
ddnsdomain=rolls-royce.local
dhcpserver=172.18.10.51
dynamicrange=172.18.254.200-172.18.254.250
mgtifname=eth0
nameservers=172.18.10.51
net=172.18.0.0/16
ntpservers=172.18.10.51
tftpserver=172.18.10.51
see site configuration too:
# lsdef -t site -o clustersite
Object name: clustersite
SNsyncfiledir=/var/xcat/syncfiles
blademaxp=64
cleanupxcatpost=yes
consoleondemand=yes
databaseloc=/var/lib
db2installloc=/mntdb2
dhcpinterfaces=eth0,eth1
dnshandler=ddns
domain=xxx.local
enableASMI=no
fsptimeout=0
gateway=172.18.10.0
installdir=/install
ipmimaxp=64
ipmiretries=3
ipmitimeout=2
master=172.18.10.51
maxssh=8
nameservers=172.18.0.1
powerinterval=0
ppcmaxp=64
ppcretry=3
ppctimeout=0
sharedtftp=1
site=RRUK
sshbetweennodes=ALLGROUPS
syspowerinterval=0
tftpdir=/tftpboot
timezone=Europe/London
useNmapfromMN=yes
vsftp=y
xcatconfdir=/etc/xcat
xcatdport=3001
xcatiport=3002
Regards,
André
EntServ Deutschland GmbH: Schickardstraße 32, 71034 Böblingen, Germany -
Board of Directors: Joachim Löffler (Chairman) - Registered in Stuttgart:
HRB 757510..
DXC Technology Company -- This message is transmitted to you by or on
behalf of DXC Technology Company or one of its affiliates. It is intended
exclusively for the addressee. The substance of this message, along with
any attachments, may contain proprietary, confidential or privileged
information or information that is otherwise legally exempt from
disclosure. Any unauthorized review, use, disclosure or distribution is
prohibited. If you are not the intended recipient of this message, you are
not authorized to read, print, retain, copy or disseminate any part of this
message. If you have received this message in error, please destroy and
delete all copies and notify the sender by return e-mail. Regardless of
content, this e-mail shall not operate to bind DXC Technology Company or
any of its affiliates to any order or other contract unless pursuant to
explicit written agreement or government initiative expressly permitting
the use of e-mail for such purpose. --.
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
