On Sat, Feb 19, 2011 at 06:47:07PM +0100, martin.kopp...@gmx.de wrote: > Moin, > > until now, I have only used XCSoar on my HP310 as a standalone device, not > connected to any other instrument. > > I have now been trying to connect it to my Flarm device in order to use the > same GPS data and also get the flarm warnings displayed on the HP, and also > use the flarm as another logger. The Manual has nothing here. Now ... I'm > kind of stuck. > > I do not have any information on how the settings should be for this > connection. > Com Port? Baud rate? What device device type for connecting with flarm?
Typically on wince devices the physical serial port is com1. Bluetooth is com7 i believe. The default BaudRate of Flarm is 19200 according to the manual. The Devicetype to use is GENERIC. > And then: How to check? As far as I understand, there will be no flarm > display unless flarm traffic is close, so what will I see once it works with > no traffic in my area? > The only feedback I have so far is that when trying to declare I get a > message "No Logger Found" or so. If its your only device that supplies gps data. You should see your location and no "gps disconnected" dialog should appear. - Folken ------------------------------------------------------------------------------ The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: Pinpoint memory and threading errors before they happen. Find and fix more than 250 security defects in the development cycle. Locate bottlenecks in serial and parallel code that limit performance. http://p.sf.net/sfu/intel-dev2devfeb _______________________________________________ Xcsoar-user mailing list Xcsoar-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcsoar-user
