Please create a ticket include a copy of the logcat and your registry.prf. from when it crashes with two devices attached.
> If I tried one flight with de-configured Borgelt and just Flarm but this > also seemed unstable. But I missed the real time wind speed updates I > get via the Borgelt too much to test this one for too long! --> do you mean "also seemed stable"? Rob At 04:59 AM 2/5/2012, Ronald Niederhagen wrote: >Ian, are you using a level shifter (RS232 to logic level) to interface >the IOIO with the B500 and the FLARM? > >Do you have GND wired up between all the components? Preferably a star >like connection between the IOIO, B500, FLARM, ground wire. > >Just want to eliminate the simple stuff before digging into S/W. > >I remember someone said there is a switch to turn on logging all which >comes from the input device(es). If the above fails, you can turn it on >and see what the last entries look like. Might even be able to replay it >later. > >Ronald > >Am 05.02.2012 08:18, schrieb Ian: > > Hi All > > > > I managed to get my IOIO card setup working just in time for our local > > regional competition/flying week. Lots of fun :-) > > > > I have got both my Borgelt B500 and Flarm connected through the IOIO to > > XCSoar running on my Dell Streak 5. I found 2 problems during the week: > > > > > > The IOIO seems to freeze up after running for 20 minutes to an hour. I > > suddenly get errors reading the IOIO port and no GPS data. Power cycling > > the IOIO / Flarm / Borgelt (which all run off the same switch) fixed it > > - at the inconvenience of having all that stuff rebooted in flight. > > Later I tried unplugging the USB cable from the Streak and plugging it > > in again - not too easy in flight, that also cleared the problem. But > > inevitably it recurred after a while. > > > > Later in the week If I de-configured the Flarm and ran just the Borgelt > > communicating via the IOIO. This is much more stable. The problem > > occurred maybe once in a flight and often not at all. > > > > If I tried one flight with de-configured Borgelt and just Flarm but this > > also seemed unstable. But I missed the real time wind speed updates I > > get via the Borgelt too much to test this one for too long! > > > > > > The other issue, when the Flarm was working and when flying in proximity > > with other Flarm equipped gliders, I did no see anything Flarm related > > information on the display. I have switched on all of the "Flarm" stuff > > I could find in the setup menu's but maybe I need to enable a specific > > info box or setup something special to see Flarm data? Or maybe there is > > another issue? > > > > > > Are there know issues with this, or should I raise a ticket? > > > > > > Thanks Ian > > > > > > > ------------------------------------------------------------------------------ > > Try before you buy = See our experts in action! > > The most comprehensive online learning library for Microsoft developers > > is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3, > > Metro Style Apps, more. Free future releases when you subscribe now! > > http://p.sf.net/sfu/learndevnow-dev2 > > _______________________________________________ > > Xcsoar-user mailing list > > Xcsoar-user@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/xcsoar-user > > > > > >------------------------------------------------------------------------------ >Try before you buy = See our experts in action! >The most comprehensive online learning library for Microsoft developers >is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3, >Metro Style Apps, more. Free future releases when you subscribe now! >http://p.sf.net/sfu/learndevnow-dev2 >_______________________________________________ >Xcsoar-user mailing list >Xcsoar-user@lists.sourceforge.net >https://lists.sourceforge.net/lists/listinfo/xcsoar-user ------------------------------------------------------------------------------ Try before you buy = See our experts in action! The most comprehensive online learning library for Microsoft developers is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3, Metro Style Apps, more. Free future releases when you subscribe now! http://p.sf.net/sfu/learndevnow-dev2 _______________________________________________ Xcsoar-user mailing list Xcsoar-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcsoar-user
