Hi! I have modified the configuration to disable profiling and to set the NMI time value to 100. However, there is no difference. Could this be a compiler issue? I am using gcc 4.1.2 (debian etch prerelease) I try to recompile the kernel using an older gcc-3.3 to see if this helps.
Regards Mathias > > here is my /proc/interrupts > > > > CPU0 > > 0: 331260 IO-APIC-edge timer > > 1: 8 IO-APIC-edge i8042 > > 7: 0 IO-APIC-edge parport0 > > 9: 0 IO-APIC-fasteoi acpi > > 14: 12 IO-APIC-edge ide0 > > 16: 1022 IO-APIC-fasteoi eth0 > > 19: 2358 IO-APIC-fasteoi libata > > NMI: 331248 > > LOC: 331233 > > ERR: 0 > > MIS: 0 > > Nothing unusual on first sight. > > > > > I have enclosed a config.gz file of my 2.6.19.1 kernel. > > Two things to try: > - CONFIG_XENO_HW_NMI_DEBUG_LATENCY_MAX=100 (i.e. default again) > - CONFIG_PROFILING=y (I'm not sure ATM if it may interfere with > Xenomai's watchdog) > > Jan > > -- Mathias Koehrer [EMAIL PROTECTED] Viel oder wenig? Schnell oder langsam? Unbegrenzt surfen + telefonieren ohne Zeit- und Volumenbegrenzung? DAS TOP ANGEBOT JETZT bei Arcor: günstig und schnell mit DSL - das All-Inclusive-Paket für clevere Doppel-Sparer, nur 44,85 inkl. DSL- und ISDN-Grundgebühr! http://www.arcor.de/rd/emf-dsl-2 _______________________________________________ Xenomai-help mailing list [email protected] https://mail.gna.org/listinfo/xenomai-help
