Hope you can help. My configuration is as follows: PXA25xx ADS card w/ NO PCI bridge Linux-2.6.24.5 kernel Xenomai 2.4.5 stable
The Xenomai port to the kernel is as follows: ./prepare-kernel.sh linux=../../linux-2.6.24.5 --adeos=adeos-ipipe-2.6.24-arm-1.9-00.patch --adeos=adeos-ipipe-2.6.24-arm-1.9-01.patch --arch=arm ./xenomai-2.4.5/scripts/prepare-kernel.sh --linux=linux-2.6.24.5 --adeos=./xenomai-2.4.5/ksrc/arch/arm/patches/ adeos-ipipe-2.6.24-arm-1.9-01.patch I used 2 patches but have tried to use either/or with the same indications. configure CC=arm-linux-gcc --enable-arm-eabi --prefix=/home/dvdb-lite/rootfs/usr/xenomai --host=arm-linux --enable-arm-arch=pxa See attached for the output log. Step 1: Looking at post from July 05, 2008 - 12:26: it states to turn on full debug to get the best output so that output file is attached also as debug1.log Step 2 Then it stated to turn off Xenomai all together: The log looks the same but is also attached as debug2.log Step 3 Turn off ipipe altogether The kernel/card is back to working. Hop you can help, Thanks, Ken _______________________________________________ Xenomai-help mailing list [email protected] https://mail.gna.org/listinfo/xenomai-help
