ken barnett wrote:
> Hope you can help.
>
> My configuration is as follows:
> PXA25xx ADS card w/ NO PCI bridge
> Linux-2.6.24.5 kernel
> Xenomai 2.4.5 stable
>
> The Xenomai port to the kernel is as follows:
>
> ./prepare-kernel.sh linux=../../linux-2.6.24.5
> --adeos=adeos-ipipe-2.6.24-arm-1.9-00.patch
> --adeos=adeos-ipipe-2.6.24-arm-1.9-01.patch --arch=arm
>
> ./xenomai-2.4.5/scripts/prepare-kernel.sh --linux=linux-2.6.24.5
> --adeos=./xenomai-2.4.5/ksrc/arch/arm/patches/
> adeos-ipipe-2.6.24-arm-1.9-01.patch
>
> I used 2 patches but have tried to use either/or with the
> same indications.
>
> configure CC=arm-linux-gcc --enable-arm-eabi
> --prefix=/home/dvdb-lite/rootfs/usr/xenomai --host=arm-linux
> --enable-arm-arch=pxa
>
> See attached for the output log.
>
> Step 1:
> Looking at post from July 05, 2008 - 12:26: it states to turn on full debug to
> get the best output so that output file is attached also as debug1.log
>
> Step 2
> Then it stated to turn off Xenomai all together:
> The log looks the same but is also attached as debug2.log
>
> Step 3
> Turn off ipipe altogether
> The kernel/card is back to working.
>
> Hop you can help,
I am afraid you forgot attachments, or url to them.
--
Gilles.
_______________________________________________
Xenomai-help mailing list
[email protected]
https://mail.gna.org/listinfo/xenomai-help
