Henri Roosen wrote:
> This code is part of the iMX25 bsp that is not part of any kernel yet,
> so generating a patch is not possible. Seems the upcoming 2.6.32
> kernel will have support for iMX25, but the -rc5 still has
> build-failures for this platform.
Ok. But could you point me to the code in the mach-mx3 tree? I do not
find any cpu.c. The Denx Qong box probably has the same issue as imx25,
and I would be interested in fixing it.
>
> Maybe the complete BSP with ipipe for the iMX25 and 2.6.28 kernel
> might be interesting for release (similar as the patch
> ipipe-2.6.26-mxc.diff), but is still in an early development state:
> now the latency app runs I see it runs fine only for a few minutes and
> then gets overruns... asks for debugging ;-)
Ok. You can try and use the I-pipe tracer. And make sure to run latency
-p 1000. I can have a look at your I-pipe code to see if I do not see
anything obvious.
--
Gilles
_______________________________________________
Xenomai-help mailing list
[email protected]
https://mail.gna.org/listinfo/xenomai-help
