Gilles, On Thu, 2010-06-17 at 10:50 +0200, Gilles Chanteperdrix wrote: > Abhijit Majumdar wrote: > > We use adeos-ipipe-2.6.28.10-arm-1.12-07.patch. > > Ok. That is the latest I-pipe patch for 2.6.28. However, why are you > using a 2.6.28 kernel? If you are starting a new project, there is no > reason not to pick the latest kernel.
The 2.6.28.10 kernel that they are using is the latest release that we provide that has support patches for the board that they are using. We pick a stable version and develop with that for awhile before updating to a newer version, as we simply don't have enough developers to continually update and re-test newer kernel versions for all of our products. We are working on a newer version for a new board but that hasn't been tested yet. Abhijit: it would be possible to compile a new kernel (i.e. 2.6.33) with Xenomai 2.5.3 for the AT91SAM9G20 eval board that would work with your board (after some configuration changes). It wouldn't support all of the custom I/O but you would be able to test the failure that you are seeing. The AT91 patch set for 2.6.33 would also need to be applied. The at91 experimental patch set is not ported to 2.6.33 yet, but this shouldn't be a problem for initial testing. Thanks, TAS _______________________________________________ Xenomai-help mailing list [email protected] https://mail.gna.org/listinfo/xenomai-help
