Dear Stefan, I have taken the snapshopts of the command prompt and attached below for your reference
r...@hemalc:~# update-initramfs -c -k all update-initramfs: Generating /boot/initrd.img-2.6.32-24-generic update-initramfs: Generating /boot/initrd.img-2.6.32-21-generic r...@hemalc:~# update-grub Generating grub.cfg ... Found linux image: /boot/vmlinuz-2.6.32.15-xenomai-2.5.4 Found linux image: /boot/vmlinuz-2.6.32-24-generic Found initrd image: /boot/initrd.img-2.6.32-24-generic Found linux image: /boot/vmlinuz-2.6.32-21-generic Found initrd image: /boot/initrd.img-2.6.32-21-generic Found memtest86+ image: /boot/memtest86+.bin Found Microsoft Windows XP Professional on /dev/sda1 done r...@hemalc:~# Best Regards, Hemal Bavishi ________________________________________ From: Hemal C.Bavishi Sent: Friday, August 13, 2010 3:47 PM To: Stefan Kisdaroczi Cc: [email protected] Subject: RE: [Xenomai-help] 2.6.32.18/x86 (Ubuntu) hangs at boot w/ Xenomai 2.5.3 [was: HELP] Dear Stefan, Yes, but even after that it's not generating/showing the initrd entry. Have a look into the boot log message. This might help you in identifying the cause of an error Please find below the log message:=> from 0.733061 to 0.733630 is the cause of an error Best Regards, Hemal Bavishi [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32.15-xenomai-2.5.4 (r...@hemalc) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #1 SMP Fri Aug 13 05:13:06 CEST 2010 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable) [ 0.000000] BIOS-e820: 000000003f7d0000 - 000000003f7e5600 (reserved) [ 0.000000] BIOS-e820: 000000003f7e5600 - 00000003f7f8000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f7f8000 - 000000003f800000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x3f7d0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base F3F800000 mask FFF800000 uncachable [ 0.000000] 2 base 0FEDA0000 mask FFFFE0000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003f7d0000 (usable) [ 0.000000] modified: 000000003f7d0000 - 000000003f7e5600 (reserved) [ 0.000000] modified: 000000003f7e5600 - 000000003f7f8000 (ACPI NVS) [ 0.000000] modified: 000000003f7f8000 - 000000003f800000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fed20000 - 00000000fed9b000 (reserved) [ 0.000000] modified: 00000000feda0000 - 00000000fedc0000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffb00000 - 00000000ffc00000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 0000879918] TEXT DATA BSS ==> [0000100000 - 0000879918] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [000087a000 - 000087d160] BRK ==> [000087a000 - 000087d160] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003f7d0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003f7d0 [ 0.000000] On node 0 totalpages: 259947 [ 0.000000] free_area_init_node: node 0, pgdat c071a720, node_mem_map c1001000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 256 pages used for memmap [ 0.000000] HighMem zone: 32466 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Found and enabled local APIC! [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 3f800000 (gap: 3f800000:bf400000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 24 pages/cpu @c1800000 s74904 r0 d23400 u4194304 [ 0.000000] pcpu-alloc: s74904 r0 d23400 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257915 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32.15-xenomai-2.5.4 root=/dev/sda7 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5200960 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003f7d0) [ 0.000000] Memory: 1017616k/1040192k available (4374k kernel code, 21804k reserved, 1913k data, 576k init, 130888k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0725000 - 0xc07b5000 ( 576 kB) [ 0.000000] .data : 0xc0545a6a - 0xc0724088 (1913 kB) [ 0.000000] .text : 0xc0100000 - 0xc0545a6a (4374 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] I-pipe 2.7-01: pipeline enabled. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1662.492 MHz processor. [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.98 BogoMIPS (lpj=6649968) [ 0.004031] Security Framework initialized [ 0.004038] SELinux: Disabled at boot. [ 0.004051] Mount-cache hash table entries: 512 [ 0.004292] Initializing cgroup subsys ns [ 0.004298] Initializing cgroup subsys cpuacct [ 0.004306] Initializing cgroup subsys memory [ 0.004328] Initializing cgroup subsys devices [ 0.004335] Initializing cgroup subsys freezer [ 0.004339] Initializing cgroup subsys net_cls [ 0.004376] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004382] CPU: L2 cache: 2048K [ 0.004387] CPU: Unsupported number of siblings 2 [ 0.004392] mce: CPU supports 6 MCE banks [ 0.004401] CPU0: Thermal monitoring handled by SMI [ 0.004412] Performance Events: Core2 events, Intel PMU driver. [ 0.004435] ... version: 2 [ 0.004438] ... bit width: 40 [ 0.004442] ... generic registers: 2 [ 0.004446] ... value mask: 000000ffffffffff [ 0.004449] ... max period: 000000007fffffff [ 0.004453] ... fixed-purpose events: 3 [ 0.004457] ... event mask: 0000000700000003 [ 0.004463] Checking 'hlt' instruction... OK. [ 0.021776] SMP alternatives: switching to UP code [ 0.033709] Freeing SMP alternatives: 30k freed [ 0.033723] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.033729] ftrace: allocating 18962 entries in 38 pages [ 0.050614] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.050619] weird, boot CPU (#0) not listed by the BIOS. [ 0.050622] SMP motherboard not detected. [ 0.156021] SMP disabled [ 0.156181] Brought up 1 CPUs [ 0.156185] Total of 1 processors activated (3324.98 BogoMIPS). [ 0.156710] CPU0 attaching NULL sched-domain. [ 0.156905] devtmpfs: initialized [ 0.160539] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. [ 0.165093] regulator: core version 0.5 [ 0.165195] Time: 10:44:16 Date: 08/13/10 [ 0.165643] NET: Registered protocol family 16 [ 0.167041] EISA bus registered [ 0.178158] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32 [ 0.178187] PCI: Using configuration type 1 for base access [ 0.188351] bio: create slab <bio-0> at 0 [ 0.189418] vgaarb: loaded [ 0.191033] SCSI subsystem initialized [ 0.191374] libata version 3.00 loaded. [ 0.192183] usbcore: registered new interface driver usbfs [ 0.192346] usbcore: registered new interface driver hub [ 0.192611] usbcore: registered new device driver usb [ 0.193808] PCI: Probing PCI hardware [ 0.193836] PCI: Probing PCI hardware (bus 00) [ 0.194592] pci 0000:00:02.0: reg 10 32bit mmio: [0xf4400000-0xf447ffff] [ 0.194646] pci 0000:00:02.0: reg 14 io port: [0x4000-0x4007] [ 0.194698] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xe0000000-0xefffffff] [ 0.194752] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf4480000-0xf44bffff] [ 0.195125] pci 0000:00:02.1: reg 10 32bit mmio: [0xf4500000-0xf457ffff] [ 0.195847] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf4580000-0xf4583fff] [ 0.196212] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.196254] pci 0000:00:1b.0: PME# disabled [ 0.196690] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.196732] pci 0000:00:1c.0: PME# disabled [ 0.197179] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.197220] pci 0000:00:1c.1: PME# disabled [ 0.197689] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.197731] pci 0000:00:1c.3: PME# disabled [ 0.198045] pci 0000:00:1d.0: reg 20 io port: [0x4020-0x403f] [ 0.198361] pci 0000:00:1d.1: reg 20 io port: [0x4040-0x405f] [ 0.198677] pci 0000:00:1d.2: reg 20 io port: [0x4060-0x407f] [ 0.199010] pci 0000:00:1d.3: reg 20 io port: [0x4080-0x409f] [ 0.199347] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf4584000-0xf45843ff] [ 0.199651] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.199693] pci 0000:00:1d.7: PME# disabled [ 0.200511] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.200560] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.200601] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO [ 0.200639] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f) [ 0.200693] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0238 (mask 0007) [ 0.201008] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] [ 0.201061] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] [ 0.201114] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] [ 0.201168] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] [ 0.201221] pci 0000:00:1f.2: reg 20 io port: [0x40a0-0x40af] [ 0.201402] pci 0000:00:1f.2: PME# supported from D3hot [ 0.201442] pci 0000:00:1f.2: PME# disabled [ 0.202197] pci 0000:10:00.0: reg 10 32bit mmio: [0xf4000000-0xf4000fff] [ 0.202699] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold [ 0.202748] pci 0000:10:00.0: PME# disabled [ 0.203149] pci 0000:00:1c.1: bridge 32bit mmio: [0xf4000000-0xf40fffff] [ 0.203532] pci 0000:00:1c.3: bridge io port: [0x2000-0x3fff] [ 0.203573] pci 0000:00:1c.3: bridge 32bit mmio: [0xf0000000-0xf3ffffff] [ 0.203875] pci 0000:02:06.0: reg 10 32bit mmio: [0xf4100000-0xf4100fff] [ 0.204042] pci 0000:02:06.0: supports D1 D2 [ 0.204068] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.204112] pci 0000:02:06.0: PME# disabled [ 0.204320] pci 0000:02:06.1: reg 10 32bit mmio: [0xf4101000-0xf41017ff] [ 0.204379] pci 0000:02:06.1: reg 14 32bit mmio: [0xf4104000-0xf4107fff] [ 0.204642] pci 0000:02:06.1: supports D1 D2 [ 0.204668] pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot [ 0.204710] pci 0000:02:06.1: PME# disabled [ 0.205022] pci 0000:02:0e.0: reg 10 32bit mmio: [0xf4108000-0xf4109fff] [ 0.205300] pci 0000:02:0e.0: supports D1 D2 [ 0.205326] pci 0000:02:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.205368] pci 0000:02:0e.0: PME# disabled [ 0.205570] pci 0000:00:1e.0: transparent bridge [ 0.205621] pci 0000:00:1e.0: bridge 32bit mmio: [0xf4100000-0xf43fffff] [ 0.206415] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.216128] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:27b9] [ 0.218207] NetLabel: Initializing [ 0.218229] NetLabel: domain hash size = 128 [ 0.218253] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.218426] NetLabel: unlabeled traffic allowed by default [ 0.218878] hpet clockevent registered [ 0.218907] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.220278] Switching to clocksource tsc [ 0.250468] PnPBIOS: Scanning system for PnP BIOS support... [ 0.250505] PnPBIOS: Found PnP BIOS installation structure at 0xc00f5e10 [ 0.250535] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x5e3e, dseg 0xf0000 [ 0.254705] pnp 00:0e: io resource (0x1100-0x112f) overlaps 0000:00:1f.0 BAR 14 (0x1100-0x113f), disabling [ 0.255034] PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver [ 0.255141] system 00:02: iomem range 0x0-0x9ffff could not be reserved [ 0.255185] system 00:02: iomem range 0xe0000-0xfffff could not be reserved [ 0.255229] system 00:02: iomem range 0x100000-0x3f7fffff could not be reserved [ 0.255336] system 00:0e: ioport range 0x510-0x51f has been reserved [ 0.255374] system 00:0e: ioport range 0x4d0-0x4d1 has been reserved [ 0.255412] system 00:0e: ioport range 0x1000-0x107f has been reserved [ 0.255453] system 00:0e: ioport range 0x1200-0x121f has been reserved [ 0.255549] system 00:0e: iomem range 0xfff0000-0x100effff could not be reserved [ 0.255594] system 00:0e: iomem range 0xffb0000-0x100b03ff could not be reserved [ 0.257966] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08 [ 0.258002] pci 0000:00:1c.0: IO window: 0x5000-0x5fff [ 0.258048] pci 0000:00:1c.0: MEM window: 0x44000000-0x441fffff [ 0.258090] pci 0000:00:1c.0: PREFETCH window: 0x00000044200000-0x000000443fffff [ 0.258147] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10 [ 0.258182] pci 0000:00:1c.1: IO window: 0x6000-0x6fff [ 0.258228] pci 0000:00:1c.1: MEM window: 0xf4000000-0xf40fffff [ 0.258270] pci 0000:00:1c.1: PREFETCH window: 0x00000044400000-0x000000445fffff [ 0.258327] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:20 [ 0.258362] pci 0000:00:1c.3: IO window: 0x2000-0x3fff [ 0.258408] pci 0000:00:1c.3: MEM window: 0xf0000000-0xf3ffffff [ 0.258449] pci 0000:00:1c.3: PREFETCH window: 0x00000044600000-0x000000447fffff [ 0.258543] pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03 [ 0.258572] pci 0000:02:06.0: IO window: 0x007000-0x0070ff [ 0.258612] pci 0000:02:06.0: IO window: 0x007400-0x0074ff [ 0.258654] pci 0000:02:06.0: PREFETCH window: 0x40000000-0x43ffffff [ 0.258697] pci 0000:02:06.0: MEM window: 0x48000000-0x4bffffff [ 0.258738] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.258773] pci 0000:00:1e.0: IO window: 0x7000-0x7fff [ 0.258819] pci 0000:00:1e.0: MEM window: 0xf4100000-0xf43fffff [ 0.258860] pci 0000:00:1e.0: PREFETCH window: 0x40000000-0x43ffffff [ 0.258965] PCI: setting IRQ 10 as level-triggered [ 0.258993] pci 0000:00:1c.0: found PCI INT A -> IRQ 10 [ 0.259049] pci 0000:00:1c.0: sharing IRQ 10 with 0000:00:02.0 [ 0.259342] pci 0000:00:1c.0: sharing IRQ 10 with 0000:02:0e.0 [ 0.259393] pci 0000:00:1c.0: setting latency timer to 64 [ 0.259545] PCI: setting IRQ 11 as level-triggered [ 0.259573] pci 0000:00:1c.1: found PCI INT B -> IRQ 11 [ 0.259735] pci 0000:00:1c.1: sharing IRQ 11 with 0000:00:1d.1 [ 0.259856] pci 0000:00:1c.1: sharing IRQ 11 with 0000:00:1f.2 [ 0.259904] pci 0000:00:1c.1: sharing IRQ 11 with 0000:10:00.0 [ 0.260000] pci 0000:00:1c.1: setting latency timer to 64 [ 0.260082] pci 0000:00:1c.3: found PCI INT D -> IRQ 10 [ 0.260275] pci 0000:00:1c.3: sharing IRQ 10 with 0000:00:1d.3 [ 0.260415] pci 0000:00:1c.3: sharing IRQ 10 with 0000:02:06.1 [ 0.260480] pci 0000:00:1c.3: setting latency timer to 64 [ 0.260542] pci 0000:00:1e.0: setting latency timer to 64 [ 0.260626] pci 0000:02:06.0: found PCI INT A -> IRQ 11 [ 0.260803] pci 0000:02:06.0: sharing IRQ 11 with 0000:00:1d.2 [ 0.260999] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.261028] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.261058] pci_bus 0000:08: resource 0 io: [0x5000-0x5fff] [ 0.261087] pci_bus 0000:08: resource 1 mem: [0x44000000-0x441fffff] [ 0.261117] pci_bus 0000:08: resource 2 pref mem [0x44200000-0x443fffff] [ 0.261148] pci_bus 0000:10: resource 0 io: [0x6000-0x6fff] [ 0.261177] pci_bus 0000:10: resource 1 mem: [0xf4000000-0xf40fffff] [ 0.261207] pci_bus 0000:10: resource 2 pref mem [0x44400000-0x445fffff] [ 0.261238] pci_bus 0000:20: resource 0 io: [0x2000-0x3fff] [ 0.261266] pci_bus 0000:20: resource 1 mem: [0xf0000000-0xf3ffffff] [ 0.261297] pci_bus 0000:20: resource 2 pref mem [0x44600000-0x447fffff] [ 0.261328] pci_bus 0000:02: resource 0 io: [0x7000-0x7fff] [ 0.261356] pci_bus 0000:02: resource 1 mem: [0xf4100000-0xf43fffff] [ 0.261386] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x43ffffff] [ 0.261417] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.261445] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.261475] pci_bus 0000:03: resource 0 io: [0x7000-0x70ff] [ 0.261503] pci_bus 0000:03: resource 1 io: [0x7400-0x74ff] [ 0.261531] pci_bus 0000:03: resource 2 pref mem [0x40000000-0x43ffffff] [ 0.261562] pci_bus 0000:03: resource 3 mem: [0x48000000-0x4bffffff] [ 0.261807] NET: Registered protocol family 2 [ 0.262524] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.265051] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.265671] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.266013] TCP: Hash tables configured (established 131072 bind 65536) [ 0.266043] TCP reno registered [ 0.266656] NET: Registered protocol family 1 [ 0.266806] pci 0000:00:02.0: Boot video device [ 0.285382] Scanning for low memory corruption every 60 seconds [ 0.286214] audit: initializing netlink socket (disabled) [ 0.286314] type=2000 audit(1281696256.283:1): initialized [ 0.315615] highmem bounce pool size: 64 pages [ 0.315666] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.339069] VFS: Disk quotas dquot_6.5.2 [ 0.339793] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.348440] fuse init (API version 7.13) [ 0.349611] msgmni has been set to 1732 [ 0.351566] alg: No test for stdrng (krng) [ 0.352261] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.352294] io scheduler noop registered [ 0.352319] io scheduler anticipatory registered [ 0.352345] io scheduler deadline registered [ 0.352921] io scheduler cfq registered (default) [ 0.354259] alloc irq_desc for 16 on node -1 [ 0.354279] alloc kstat_irqs on node -1 [ 0.354346] pcieport 0000:00:1c.0: irq 16 for MSI/MSI-X [ 0.354414] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.355284] alloc irq_desc for 17 on node -1 [ 0.355304] alloc kstat_irqs on node -1 [ 0.355367] pcieport 0000:00:1c.1: irq 17 for MSI/MSI-X [ 0.355434] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.356393] alloc irq_desc for 18 on node -1 [ 0.356413] alloc kstat_irqs on node -1 [ 0.356476] pcieport 0000:00:1c.3: irq 18 for MSI/MSI-X [ 0.356543] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.357256] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.357550] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0 [ 0.357928] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded [ 0.358066] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0 [ 0.358441] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded [ 0.358580] pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 27d6 ss_vid 0 ss_did 0 [ 0.358936] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded [ 0.359039] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.359908] isapnp: Scanning for PnP cards... [ 0.714717] isapnp: No Plug & Play device found [ 0.730152] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.733061] PNPBIOS fault.. attempting recovery. [ 0.733149] PnPBIOS: Warning! Your PnP BIOS caused a fatal error. Attempting to continue [ 0.733249] PnPBIOS: You may need to reboot with the "pnpbios=off" option to operate stably [ 0.733349] PnPBIOS: Check with your vendor for an updated BIOS [ 0.733438] PnPBIOS: set_dev_node: unexpected status 0x3a [ 0.733526] serial 00:0c: activation failed [ 0.733630] serial: probe of 00:0c failed with error -5 [ 0.747330] brd: module loaded [ 0.753851] loop: module loaded [ 0.754858] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 0.755777] ata_piix 0000:00:1f.2: version 2.13 [ 0.755870] ata_piix 0000:00:1f.2: found PCI INT B -> IRQ 11 [ 0.756034] ata_piix 0000:00:1f.2: sharing IRQ 11 with 0000:00:1d.1 [ 0.756175] ata_piix 0000:00:1f.2: sharing IRQ 11 with 0000:10:00.0 [ 0.756279] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 0.756559] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.756928] scsi0 : ata_piix [ 0.757732] scsi1 : ata_piix [ 0.758230] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x40a0 irq 14 [ 0.758263] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40a8 irq 15 [ 0.762500] Fixed MDIO Bus: probed [ 0.762921] PPP generic driver version 2.4.2 [ 0.763347] tun: Universal TUN/TAP device driver, 1.6 [ 0.763373] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 0.765124] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.765283] ehci_hcd 0000:00:1d.7: found PCI INT A -> IRQ 10 [ 0.765432] ehci_hcd 0000:00:1d.7: sharing IRQ 10 with 0000:00:1d.0 [ 0.765688] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.765725] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.766091] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.766200] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.766270] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.770206] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.770272] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xf4584000 [ 0.783542] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.784637] usb usb1: configuration #1 chosen from 1 choice [ 0.784949] hub 1-0:1.0: USB hub found [ 0.785057] hub 1-0:1.0: 8 ports detected [ 0.785873] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.786033] uhci_hcd: USB Universal Host Controller Interface driver [ 0.786266] uhci_hcd 0000:00:1d.0: found PCI INT A -> IRQ 10 [ 0.786476] uhci_hcd 0000:00:1d.0: sharing IRQ 10 with 0000:00:1d.7 [ 0.786648] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.786682] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.787035] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.787140] uhci_hcd 0000:00:1d.0: irq 10, io base 0x00004020 [ 0.788265] usb usb2: configuration #1 chosen from 1 choice [ 0.788571] hub 2-0:1.0: USB hub found [ 0.788646] hub 2-0:1.0: 2 ports detected [ 0.789195] uhci_hcd 0000:00:1d.1: found PCI INT B -> IRQ 11 [ 0.789450] uhci_hcd 0000:00:1d.1: sharing IRQ 11 with 0000:00:1f.2 [ 0.789499] uhci_hcd 0000:00:1d.1: sharing IRQ 11 with 0000:10:00.0 [ 0.789605] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.789640] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.790013] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.790121] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00004040 [ 0.791341] usb usb3: configuration #1 chosen from 1 choice [ 0.791702] hub 3-0:1.0: USB hub found [ 0.791788] hub 3-0:1.0: 2 ports detected [ 0.792332] uhci_hcd 0000:00:1d.2: found PCI INT C -> IRQ 11 [ 0.792623] uhci_hcd 0000:00:1d.2: sharing IRQ 11 with 0000:02:06.0 [ 0.792714] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.792749] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.793135] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.793237] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00004060 [ 0.794306] usb usb4: configuration #1 chosen from 1 choice [ 0.794613] hub 4-0:1.0: USB hub found [ 0.794698] hub 4-0:1.0: 2 ports detected [ 0.795254] uhci_hcd 0000:00:1d.3: found PCI INT D -> IRQ 10 [ 0.795602] uhci_hcd 0000:00:1d.3: sharing IRQ 10 with 0000:02:06.1 [ 0.795677] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.795712] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.796094] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.796197] uhci_hcd 0000:00:1d.3: irq 10, io base 0x00004080 [ 0.797271] usb usb5: configuration #1 chosen from 1 choice [ 0.797578] hub 5-0:1.0: USB hub found [ 0.797652] hub 5-0:1.0: 2 ports detected [ 0.798685] PNP: PS/2 Controller [PNP0303,PNP0f0e] at 0x60,0x64 irq 1,12 [ 0.800563] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.801344] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.801393] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.801680] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.801961] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.802241] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.803611] mice: PS/2 mouse device common for all mice [ 0.804657] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 0.804760] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs [ 0.806135] device-mapper: uevent: version 1.0.3 [ 0.807080] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected] [ 0.807711] device-mapper: multipath: version 1.1.0 loaded [ 0.807743] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.809050] EISA: Probing bus 0 at eisa.0 [ 0.809088] Cannot allocate resource for EISA slot 1 [ 0.809119] Cannot allocate resource for EISA slot 2 [ 0.809151] Cannot allocate resource for EISA slot 3 [ 0.809182] Cannot allocate resource for EISA slot 4 [ 0.809213] Cannot allocate resource for EISA slot 5 [ 0.809245] Cannot allocate resource for EISA slot 6 [ 0.809277] Cannot allocate resource for EISA slot 7 [ 0.809317] EISA: Detected 0 cards. [ 0.809342] cpuidle: using governor ladder [ 0.809368] cpuidle: using governor menu [ 0.813509] TCP cubic registered [ 0.815858] NET: Registered protocol family 10 [ 0.820035] lo: Disabled Privacy Extensions [ 0.823053] NET: Registered protocol family 17 [ 0.823297] Using IPI No-Shortcut mode [ 0.824045] PM: Resume from disk failed. [ 0.824159] registered taskstats version 1 [ 0.825746] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 0.827450] Magic number: 6:731:729 [ 0.827607] rtc_cmos 00:08: setting system clock to 2010-08-13 10:44:17 UTC (1281696257) [ 0.827642] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.827669] EDD information not available. [ 0.928041] ata1.00: ATA-7: ST9120821AS, 7.24, max UDMA/100 [ 0.928070] ata1.00: 234441648 sectors, multi 16: LBA48 [ 0.944139] ata1.00: configured for UDMA/100 [ 0.944856] scsi 0:0:0:0: Direct-Access ATA ST9120821AS 7.24 PQ: 0 ANSI: 5 [ 0.946413] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.947296] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 0.948027] sd 0:0:0:0: [sda] Write Protect is off [ 0.948054] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.948405] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.950288] sda: [ 0.952059] ata2.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, HH15, max MWDMA2 [ 0.963263] sda1 sda2 < sda5 [ 0.984257] ata2.00: configured for MWDMA2 [ 1.001265] sda6 [ 1.008348] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632D HH15 PQ: 0 ANSI: 5 [ 1.018801] sda7 sda8 > sda4 [ 1.032705] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.064122] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.064157] Uniform CD-ROM driver Revision: 3.20 [ 1.065092] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.065577] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.066036] md: Waiting for all devices to be available before autodetect [ 1.066066] md: If you don't use raid, use raid=noautodetect [ 1.067116] md: Autodetecting RAID arrays. [ 1.067139] md: Scanned 0 and added 0 devices. [ 1.067163] md: autorun ... [ 1.067183] md: ... autorun DONE. [ 1.079159] EXT3-fs: sda7: couldn't mount because of unsupported optional features (240). [ 1.079861] EXT2-fs: sda7: couldn't mount because of unsupported optional features (240). [ 1.117183] EXT4-fs (sda7): mounted filesystem with ordered data mode [ 1.117275] VFS: Mounted root (ext4 filesystem) readonly on device 8:7. [ 1.149050] devtmpfs: mounted [ 1.149156] Freeing unused kernel memory: 576k freed [ 1.150462] Write protecting the kernel text: 4376k [ 1.150673] Write protecting the kernel read-only data: 1652k [ 1.384116] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 1.559019] usb 2-1: configuration #1 chosen from 1 choice [ 14.117475] udev: starting version 151 [ 16.541624] Bluetooth: Core ver 2.15 [ 16.548839] NET: Registered protocol family 31 [ 16.548865] Bluetooth: HCI device and connection manager initialized [ 16.548898] Bluetooth: HCI socket layer initialized [ 16.597897] Linux agpgart interface v0.103 [ 17.301293] cfg80211: Calling CRDA to update world regulatory domain [ 17.359736] cfg80211: World regulatory domain updated: [ 17.359764] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 17.359796] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.359826] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 17.359856] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 17.359886] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.359916] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.495622] intel_rng: FWH not detected [ 17.923552] Adding 868344k swap on /dev/sda8. Priority:-1 extents:1 across:868344k [ 18.031670] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 18.047791] usbcore: registered new interface driver btusb [ 18.242939] lp: driver loaded but no devices found [ 18.913379] [drm] Initialized drm 1.1.0 20060810 [ 18.966658] ohci1394 0000:02:06.1: found PCI INT B -> IRQ 10 [ 18.967646] ohci1394 0000:02:06.1: sharing IRQ 10 with 0000:00:1d.3 [ 19.090509] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[f4101000-f41017ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 19.111576] agpgart-intel 0000:00:00.0: Intel 945GM Chipset [ 19.112679] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 19.124084] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 19.314419] b44 0000:02:0e.0: found PCI INT A -> IRQ 10 [ 19.314479] b44 0000:02:0e.0: sharing IRQ 10 with 0000:00:02.0 [ 19.392470] ssb: Sonics Silicon Backplane found on PCI device 0000:02:0e.0 [ 19.392719] b44.c:v2.0 [ 19.393532] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30a2] [ 19.393625] yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions [ 19.393670] yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI [ 19.393702] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI [ 19.393746] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01011b22, devctl 0x64 [ 19.418601] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:17:08:44:85:c9 [ 19.972881] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x02f8, PCI irq 11 [ 19.972915] yenta_cardbus 0000:02:06.0: Socket status: 30000006 [ 19.972945] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06 [ 19.973004] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff [ 19.973044] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x7000-0x7fff: clean. [ 19.979459] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xf4100000 - 0xf43fffff [ 19.979500] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff [ 20.319501] i915 0000:00:02.0: found PCI INT A -> IRQ 10 [ 20.319828] i915 0000:00:02.0: sharing IRQ 10 with 0000:02:0e.0 [ 20.319884] i915 0000:00:02.0: setting latency timer to 64 [ 20.413244] [drm] set up 7M of stolen space [ 20.434230] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000 [ 20.434270] serio: Synaptics pass-through port at isa0060/serio4/input0 [ 20.581134] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input2 [ 21.829040] [drm] TV-14: set mode NTSC 480i 0 [ 22.363069] fb0: inteldrmfb frame buffer device [ 22.363094] registered panic notifier [ 22.363131] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 22.578973] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 22.579011] iwl3945: Copyright(c) 2003-2009 Intel Corporation [ 22.579278] iwl3945 0000:10:00.0: found PCI INT A -> IRQ 11 [ 22.579443] iwl3945 0000:10:00.0: sharing IRQ 11 with 0000:00:1d.1 [ 22.579565] iwl3945 0000:10:00.0: sharing IRQ 11 with 0000:00:1f.2 [ 22.579691] iwl3945 0000:10:00.0: setting latency timer to 64 [ 22.844631] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f [ 22.867012] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 22.875426] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 22.876934] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 22.879357] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 22.931022] iwl3945 0000:10:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels [ 22.931057] iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 22.931300] alloc irq_desc for 19 on node -1 [ 22.931320] alloc kstat_irqs on node -1 [ 22.931413] iwl3945 0000:10:00.0: irq 19 for MSI/MSI-X [ 23.243428] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.532590] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 23.745904] Console: switching to colour frame buffer device 160x50 [ 23.899375] iwl3945 0000:10:00.0: firmware: requesting iwlwifi-3945-2.ucode [ 23.927454] [drm] LVDS-8: set mode 1280x800 1d [ 24.061337] iwl3945 0000:10:00.0: loaded firmware version 15.32.2.9 [ 24.279574] Registered led device: iwl-phy0::radio [ 24.279896] Registered led device: iwl-phy0::assoc [ 24.280214] Registered led device: iwl-phy0::RX [ 24.280432] Registered led device: iwl-phy0::TX [ 24.290038] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 25.118551] [drm] TV-14: set mode NTSC 480i 0 [ 25.628049] [drm] TV-14: set mode NTSC 480i 0 [ 26.626083] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 27.200237] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input3 [ 28.011762] [drm] TV-14: set mode NTSC 480i 0 [ 28.163207] [drm] TV-14: set mode NTSC 480i 0 [ 28.474828] [drm] TV-14: set mode NTSC 480i 0 [ 28.626344] [drm] TV-14: set mode NTSC 480i 0 [ 31.083342] [drm] TV-14: set mode NTSC 480i 0 [ 31.235415] [drm] TV-14: set mode NTSC 480i 0 [ 31.541119] [drm] TV-14: set mode NTSC 480i 0 [ 31.693094] [drm] TV-14: set mode NTSC 480i 0 [ 32.000795] [drm] TV-14: set mode NTSC 480i 0 [ 32.153251] [drm] TV-14: set mode NTSC 480i 0 [ 37.533439] [drm] TV-14: set mode NTSC 480i 0 [ 38.105040] [drm] TV-14: set mode NTSC 480i 0 [ 41.746799] [drm] TV-14: set mode NTSC 480i 0 [ 41.975840] [drm] TV-14: set mode NTSC 480i 0 [ 48.186196] Bluetooth: L2CAP ver 2.14 [ 48.186221] Bluetooth: L2CAP socket layer initialized [ 48.295042] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 48.295071] Bluetooth: BNEP filters: protocol multicast [ 48.369171] ppdev: user-space parallel port driver [ 48.748320] Bridge firewalling registered [ 48.962700] Bluetooth: SCO (Voice Link) ver 0.6 [ 48.962727] Bluetooth: SCO socket layer initialized [ 49.311784] Bluetooth: RFCOMM TTY layer initialized [ 49.311824] Bluetooth: RFCOMM socket layer initialized [ 49.311850] Bluetooth: RFCOMM ver 1.11 [ 53.953351] wlan0: direct probe to AP 00:25:5e:73:f1:11 (try 1) [ 53.953443] wlan0: deauthenticating from 00:25:5e:73:f1:11 by local choice (reason=3) [ 53.953621] wlan0: direct probe to AP 00:25:5e:73:f1:11 (try 1) [ 53.956650] wlan0: direct probe responded [ 53.956675] wlan0: authenticate with AP 00:25:5e:73:f1:11 (try 1) [ 53.963252] wlan0: authenticated [ 53.963501] wlan0: associate with AP 00:25:5e:73:f1:11 (try 1) [ 53.966296] wlan0: RX AssocResp from 00:25:5e:73:f1:11 (capab=0x11 status=0 aid=1) [ 53.966329] wlan0: associated [ 53.973133] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 55.134407] padlock: VIA PadLock not detected. [ 64.064033] wlan0: no IPv6 routers present ________________________________________ From: Stefan Kisdaroczi [[email protected]] Sent: Friday, August 13, 2010 3:41 PM To: Hemal C.Bavishi Cc: [email protected] Subject: Re: [Xenomai-help] 2.6.32.18/x86 (Ubuntu) hangs at boot w/ Xenomai 2.5.3 [was: HELP] On 13.08.2010 09:43, Hemal C.Bavishi wrote: > Dear Stefan, > > Thank you very much for your response and showing your interest in resolving > this issue. We tried building debian package to install xenomai as suggested > by you and followed the same steps as described but it hangs up after reboot. > After some initial analysis, I found that it's not generating initrd entry in > boot kernel despite of upddate -initramfs -c -k all command. Do you have any > clue? > Did you call update-grub after update-initramfs? Stefan > Thanks, > > Best Regards, > Hemal Bavishi > ________________________________________ > From: [email protected] [[email protected]] On Behalf > Of Stefan Kisdaroczi [[email protected]] > Sent: Thursday, August 12, 2010 10:57 PM > To: [email protected]; Zafar Iqbal > Subject: Re: [Xenomai-help] 2.6.32.18/x86 (Ubuntu) hangs at boot w/ Xenomai > 2.5.3 [was: HELP] > > Hi, > > to build and install Xenomai on Ubuntu try the "Building Debian packages" > howto [1]. > You need probably to call update-initramfs as mentioned here [2]. > > Please use exactly the xenomai and kernel versions as described in the howto. > > Regards Stefan > > [1] http://www.xenomai.org/index.php/Building_Debian_packages > [2] http://www.mail-archive.com/[email protected]/msg11087.html > > Am 12.08.2010 17:40, schrieb Hemal C.Bavishi: > >> Dear Mr. Gerum, >> >> >> >> We have followed following steps to install xenomai patch on UBUNTU. After >> repeated attempt in multiple system, still we are facing >> same issues. >> >> >> >> We have used following version for installing xenomai patch on UBUNTU >> >> >> >> 1. linux Kernel: linux-2.6.32.18 >> >> 2. Xenomai patch: xenomai-2.5.4 >> >> 3. Operating System: UBUNTU 10.04 >> >> >> >> >> >> Following Steps have been followed to install xenomai patch on UBUNTU: >> >> >> >> 1. Copied the linux tar file into /usr/src >> >> 2. Copied the xenomai tar file into /usr/src >> >> 3. untar the linux and xenomai file >> >> 4. cd /usr/src/xenomai-2.2.0/scripts/prepare-kernal.sh and appropriate linux >> directory, architecture(i686) and adeos path were given >> >> 5. Make a copy of the .config file of the running kernel in the present >> directory. >> >> 6. Next ran make menuconfig and made the following changes: >> >> >> >> I. Selected Processor and feature -> Preemption Mode >> >> II. Power Management option >> >> a. Disabled ACPI. >> >> b. Disabled Frequency Scaling >> >> 7. Build the Kernel(make command) >> >> 8. copying the image of the kernel to the boot folder >> >> cp arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.18-xenomai-2.5.4 >> >> 9. At last, I tried to reboot the system in the new kernel image and found >> the following issues: >> >> >> >> >> >> dev_node is not supported in this system. >> >> IO APIC#0 ID is already in use. >> >> PnBIOS: Unable to get nod information. >> >> Sdb1 could not mount because of the unsupported optional Feature. >> >> >> >> >> >> Best Regards, >> >> Hemal Bavishi >> >> Principal Engineer >> >> >> >> KPIT Infosystems GmbH | Franziska - Bilek - Weg 9 | 80339 Munich >> >> Phone: +49(0) 89 45 23 5 83 - 06 | Mobile: +49 162 426 9950 | Fax: +49 (0) >> 89 45 23 5 83 - 07 >> >> http://www.kpitcummins.com <http://www.kpitcummins.com/>| >> mailto:[email protected] >> >> _Frankfurt Branch Office_: >> KPIT Infosystems GmbH | Mainzer Landstrasse 176 | 60327 Frankfurt | Germany >> >> Gesch?ftsf?hrer/Managing Director: Sanjay Mandal >> Handelsregister/Commercial Register: M?nchen/Munich HRB 163288 >> Sitz der Gesellschaft/Place of Business: M?nchen/Munich | >> Umsatzsteuernummer/VAT Number: DE251280557 >> >> Disclaimer: This message contains information that may be privileged or >> confidential and is the property of KPIT Cummins. It is >> intended only for the person to whom it is addressed. If you are not the >> intended recipient, you are not authorized to read, print, >> retain copy, disseminate, distribute, or use this message or any part >> thereof. If you receive this message in error, please notify >> the sender immediately and delete all copies of this message. KPIT Cummins >> does not accept any liability for virus infected mails. >> >> *P** **Please consider the impact on the environment before printing this >> e-mail* >> >> >> >> >> >> >> >> >> >> -----Original Message----- >> From: Philippe Gerum [mailto:[email protected]] >> Sent: Thursday, August 12, 2010 9:13 AM >> To: Zafar Iqbal >> Cc: Hemal C.Bavishi; [email protected] >> Subject: Re: 2.6.32.18/x86 (Ubuntu) hangs at boot w/ Xenomai 2.5.3 [was: >> HELP] >> >> >> >> On Thu, 2010-08-12 at 11:46 +0530, Zafar Iqbal wrote: >> >> >>> Dear Sir, >>> >> >>> >> >>> >> >>> I am Using Ubuntu 10.4 in my system with kernel version 2.6.32.18. >>> >> >>> I downloaded xenomai-2.5.3 and ptached into linux-2.6.32.18 after that I >>> compiled the whole kenel.using make. >>> >> >>> After that I made the image of the compiled kernel : make bzImage >>> >> >>> then copied the image to the location as in the boot folder with the >>> following command cp arch/x86/boot/bzImage >>> >> /boot/vmlinuz-2.6.32.18-xenomai-2.5.3 >> >> >>> then I updated my GRUB with the command update-grub. >>> >> >>> >> >>> When I Tried to reboot the System with the Xenomai patched Kernel my system >>> hanged up and it is not able to boot with the new >>> >> kernel image. >> >> >>> >> >>> Can you please suggest whats the wrong here. >>> >> >> >> A few hints: >> >> >> >> - that question from mainstream x86 distro users is definitely a FAQ on >> >> our mailing list. Did you have a look at the mailing list archive, to >> >> find common answers to this problem? >> >> https://mail.gna.org/public/xenomai-help/ >> >> >> >> - Did you read the TROUBLESHOOTING file at the top of the Xenomai tree >> >> and on our website? >> >> http://www.xenomai.org/documentation/xenomai-2.5/TROUBLESHOOTING >> >> >> >> - Did you read this FAQ? >> >> http://www.xenomai.org/index.php/FAQs#Tips_and_tricks_setting_up_your_x86_kernel >> >> >> >> - Do you mind sending a bit more information than "my system hanged up"? >> >> Any boot log to share? A kernel config file maybe? Did you disable the >> >> quiet boot option to see kernel messages while booting? Are there any >> >> messages at all? Our mail archive is full of advices regarding the way >> >> to troubleshoot a boot issue on x86, make sure to read them first. >> >> >> >> - Please always provide a meaningful subject line, so that people having >> >> the same issue could later find and reuse the information from that >> >> thread. "HELP" - particularly on a list called xenomai-help - does not >> >> qualify, at all. Because it could be seen as a waste of time by your >> >> recipients, it may even be counter-productive, and tends to bury your >> >> mail. >> >> >> >> - Please stop posting to xenomai-help-owner, really. This address is for >> >> sending requests related to your mailing list subscription, only. >> >> >> >> - Please do not re-post the very same question multiple times within >> >> less than 24 hours. It makes no sense; you can check that your previous >> >> message did arrive in our mail archive, so no need to spam the list with >> >> a rehash of your previous post. If people did not answer you yet, it may >> >> be because: 1) you did not provide sufficient input for them to think >> >> about your issue, 2) they don't have time to answer you at the moment, >> >> 3) they don't care, 4) they don't know, or any combination thereof. >> >> >> >> >>> >> >>> >> >>> Thanks and Regards, >>> >> >>> Zafar >>> >> >>> >> >>> >> >>> >> >> >> -- >> >> Philippe. >> >> >> >> >> >> >> >> >> This message contains information that may be privileged or confidential and >> is the property of the KPIT Cummins Infosystems Ltd. It >> is intended only for the person to whom it is addressed. If you are not the >> intended recipient, you are not authorized to read, >> print, retain copy, disseminate, distribute, or use this message or any part >> thereof. If you receive this message in error, please >> notify the sender immediately and delete all copies of this message. KPIT >> Cummins Infosystems Ltd. does not accept any liability for >> virus infected mails. >> >> >> >> _______________________________________________ >> Xenomai-help mailing list >> [email protected] >> https://mail.gna.org/listinfo/xenomai-help >> > > _______________________________________________ Xenomai-help mailing list [email protected] https://mail.gna.org/listinfo/xenomai-help
