El 3 de octubre de 2011 23:09, Alexis Berlemont <[email protected]>escribió:
> Hi, > > 2011/9/30 Fernando Herrero Carrón <[email protected]>: > > Dear list, > > > > I am testing Xenomai 2.6.0-rc4 on a 2.6.38.8 linux kernel. I have two > cards, > > one NI 6713 for AO and one NI 6143 for AI. I use the analogy_ni_pcimio > for > > both, and it loads well. I can run the config program succesfully too. > > > > If I remove the devices using 'analogy_config -r ...', then unload the > > modules with: > > > > rmmod analogy_ni_pcimio analogy_ni_mio analogy_ni_tio analogy_8255 > > analogy_ni_mite xeno_analogy > > > > then load them again and try to reconfigure, I get the following error on > > dmesg (I include the boot messages and the execution of a "cmd_read"): > > > > [ 55.735198] Analogy: analogy_ni_pcimio: pcimio_attach: found pci-6713 > > board > > [ 55.735246] Analogy: analogy_ni_pcimio: pcimio_attach: found irq 21 > > [ 60.143227] Analogy: analogy_ni_pcimio: pcimio_attach: found pci-6143 > > board > > [ 60.143274] Analogy: analogy_ni_pcimio: pcimio_attach: found irq 20 > > [ 79.772511] Analogy: a4l_ioctl_cancel: no acquisition to cancel on > this > > context > > [ 79.772517] Analogy: analogy_ni_pcimio: ni_ai_cmd: start > > [ 79.772525] Analogy: analogy_ni_pcimio: ni_ai_cmd: > > Interrupt_A_Enable_Register = 0x0021 > > [ 79.772531] Analogy: analogy_ni_pcimio: ni_ai_cmd: exit > > [ 80.572613] Analogy: analogy_ni_pcimio: ni_mio_common: interrupt: > > a_status=90f0 ai_mite_status=00200000 > > [ 80.572616] Analogy: analogy_ni_pcimio: ni_mio_common: SC_TC interrupt > > [ 236.290044] Analogy: MITE: Available NI device IDs: 0x1870 0x70c0 > > [ 246.113821] Analogy: analogy_ni_pcimio: pcimio_attach: found pci-6143 > > board > > [ 246.113872] Analogy: analogy_ni_pcimio: pcimio_attach: found irq 20 > > [ 246.113876] Analogy: analogy_ni_pcimio: pcimio_attach: irq not > available > > [ 246.113879] Analogy: a4l_request_irq: IRQ registration failed > > [ 251.563782] Analogy: analogy_ni_pcimio: pcimio_attach: found pci-6713 > > board > > [ 251.563824] Analogy: analogy_ni_pcimio: pcimio_attach: found irq 21 > > [ 251.563828] Analogy: analogy_ni_pcimio: pcimio_attach: irq not > available > > [ 251.563830] Analogy: a4l_request_irq: IRQ registration failed > > > > BTW, the analogy_config program does not report those errors. > > > > This is bothering because I'm fiddling with the drivers and everytime I > > change something I have to reboot. Anyone experiencing the same problem? > > Sorry. I will try to fix that as soon as possible. Ok, thanks! Fernando
_______________________________________________ Xenomai-help mailing list [email protected] https://mail.gna.org/listinfo/xenomai-help
