Hello everybody,
Do the Analogy driver support the serial port. I can attach the serial
port(ttyS0) to rtser0 with xeno_16550A.ko as mentionned in Xenomai
Documentation
modprobe xeno_16550A io=<io1>[,<io2>...] irq=<irq1>[,<irq2>...]
[baud_base=<base1>[,<base2>...]]
[tx_fifo=<len1>[,<len2>...]] [start_index=<index>]
How can i tell to the Analogy driver to recognize the serial port in order
to use the Analogy API. i have seen the command
/xeno_install/sbin/analogy_config analogy0 analogy_ni_pcimio
i think that analogy_ni_pcimio is the drivers suppors of National
Instruments PCI / PXI cards. But i don't have the DAQ card yet, currently i
test with two serial ports on my computer while connecting them by one
cable. the first aim is to test the api analogy.
Thanks,
when i try to add the analogy_ni_pcimio module over terminal linux. i get
one message error
insmod analogy_ni_pcimio.ko
analogy_ni_pcimio.ko : -1 Unknown symbol in module
_______________________________________________
Xenomai-help mailing list
[email protected]
https://mail.gna.org/listinfo/xenomai-help
