On 04/02/2012 04:12 PM, Minh GIANG wrote:
> Hello everybody,
>
> Do the Analogy driver support the serial port. I can attach the serial
> port(ttyS0) to rtser0 with xeno_16550A.ko as mentionned in Xenomai
> Documentation
>
> modprobe xeno_16550A io=<io1>[,<io2>...] irq=<irq1>[,<irq2>...]
> [baud_base=<base1>[,<base2>...]]
> [tx_fifo=<len1>[,<len2>...]] [start_index=<index>]
>
>
> How can i tell to the Analogy driver to recognize the serial port in
> order to use the Analogy API. i have seen the command
>
> /xeno_install/sbin/analogy_config analogy0 analogy_ni_pcimio
>
> i think that analogy_ni_pcimio is the drivers suppors of National
> Instruments PCI / PXI cards. But i don't have the DAQ card yet,
> currently i test with two serial ports on my computer while connecting
> them by one cable. the first aim is to test the api analogy.
Sorry, I did not make myself clear: the RTDM API is a general API for
making drivers, Analogy is a class of drivers for acquisition boards
written using RTDM. The analogy library allow access to this class of
driver, so, you can not use the analogy library with a serial port driver.
>
> Thanks,
>
>
>
> when i try to add the analogy_ni_pcimio module over terminal linux. i
> get one message error
>
> insmod analogy_ni_pcimio.ko
>
> analogy_ni_pcimio.ko : -1 Unknown symbol in module
See dmesg to understand what symbol is missing.
--
Gilles.
_______________________________________________
Xenomai-help mailing list
[email protected]
https://mail.gna.org/listinfo/xenomai-help
