Regarding: Trident cyber9385 problems with Xvideo extension Email: [EMAIL PROTECTED] ------------------------------------------------------------ XFree86 Version: 4.2.99.3
OS: Linux 2.4.20, custom Area: Xvideo extension Server: XFree86 (The XFree86 4.x server) Video Card: scanpci give: Trident Microsystems TGUI 9660/938x/968x Cyber9385, 2MB EDO ram. I don't have any more exact specs as this is a second-hand laptop with no documentation. Description: 1) When using Xvideo to play a movie, there is a thin blue vertical stripe at the far right of the image 2) When the image is >384 pixels wide, all of the image to the right of 384 pixels is just the last few pixels repeated. 3) When the image is >504 pixels wide, the whole image is garbled, and completely unrecognisable. (The blue stripe is still present, though) All of these were observed with both mplayer and gtv, under resolutions of 1024x768, 800x600 and 640x480. XFree86.0.log: This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.2.99.3 / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 21 December 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.7-10custom i686 [ELF] Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Fri Jan 10 14:55:58 2003 (==) Using config file: "/etc/X11/XF86Config-4" (==) ServerLayout "XFree86 Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbModel" "pc102" (**) XKB: model: "pc102" (**) Option "XkbLayout" "gb" (**) XKB: layout: "gb" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (**) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.2.99.3, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.2.99.3, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,1235 card 0000,0000 rev 02 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,122e card 0000,0000 rev 02 class 06,01,00 hdr 00 (II) PCI: 00:01:1: chip 8086,1230 card 0000,0000 rev 02 class 01,01,80 hdr 00 (II) PCI: 00:02:0: chip 104c,ac12 card fffc,ffff rev 04 class 06,07,00 hdr 82 (II) PCI: 00:02:1: chip 104c,ac12 card fffc,ffff rev 04 class 06,07,00 hdr 82 (II) PCI: 00:03:0: chip 1023,9660 card 0000,0000 rev d3 class 03,00,00 hdr 00 (II) PCI: 00:05:0: chip 1014,0057 card 0000,0000 rev 00 class 04,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,4), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) PCI-to-CardBus bridge: (II) Bus 1: bridge is at (0:2:0), (0,1,3), BCTRL: 0x00c0 (VGA_EN is cleared) (II) PCI-to-CardBus bridge: (II) Bus 4: bridge is at (0:2:1), (0,4,6), BCTRL: 0x00c0 (VGA_EN is cleared) (--) PCI:*(0:3:0) Trident Microsystems TGUI 9660/938x/968x rev 211, Mem @ 0x08000000/22, 0x08400000/16, 0x08800000/22, BIOS @ 0x000c0000/16 (--) PCI: (0:5:0) unknown vendor (0x1014) unknown chipset (0x0057) rev 0, Mem @ 0x10000000/8 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) [1] -1 0 0x08800000 - 0x08bfffff (0x400000) MX[B](B) [2] -1 0 0x08400000 - 0x0840ffff (0x10000) MX[B](B) [3] -1 0 0x08000000 - 0x083fffff (0x400000) MX[B](B) [4] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]E (II) Inactive PCI resource ranges: [0] -1 0 0x10000000 - 0x100000ff (0x100) MX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) [1] -1 0 0x08800000 - 0x08bfffff (0x400000) MX[B](B) [2] -1 0 0x08400000 - 0x0840ffff (0x10000) MX[B](B) [3] -1 0 0x08000000 - 0x083fffff (0x400000) MX[B](B) [4] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]E (II) Inactive PCI resource ranges after removing overlaps: [0] -1 0 0x10000000 - 0x100000ff (0x100) MX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x07ffffff (0x7f00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x07ffffff (0x7f00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) [6] -1 0 0x08800000 - 0x08bfffff (0x400000) MX[B](B) [7] -1 0 0x08400000 - 0x0840ffff (0x10000) MX[B](B) [8] -1 0 0x08000000 - 0x083fffff (0x400000) MX[B](B) [9] -1 0 0x10000000 - 0x100000ff (0x100) MX[B](B) [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [12] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]E (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.2.99.3, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="The XFree86 Project" compiled for 4.2.99.3, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.2.99.3, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension GLX (II) LoadModule: "dri" (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="The XFree86 Project" compiled for 4.2.99.3, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor="The XFree86 Project" compiled for 4.2.99.3, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension XFree86-DRI (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.2.99.3, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "record" (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a (II) Module record: vendor="The XFree86 Project" compiled for 4.2.99.3, module version = 1.13.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension RECORD (II) LoadModule: "xtrap" (II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a (II) Module xtrap: vendor="The XFree86 Project" compiled for 4.2.99.3, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension DEC-XTRAP (II) LoadModule: "speedo" (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a (II) Module speedo: vendor="The XFree86 Project" compiled for 4.2.99.3, module version = 1.0.1 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Speedo (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.2.99.3, module version = 1.0.2 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "trident" (II) Loading /usr/X11R6/lib/modules/drivers/trident_drv.o (II) Module trident: vendor="The XFree86 Project" compiled for 4.2.99.3, module version = 1.0.0 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.2.99.3, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.4 (II) TRIDENT: driver for Trident chipsets: tvga9000, tvga9000i, tvga8900c, tvga8900d, tvga9200cxr, tgui9400cxi, cyber9320, cyber9388, cyber9397, cyber9397dvd, cyber9520, cyber9525dvd, cyberblade/e4, tgui9420dgi, tgui9440agi, tgui9660, tgui9680, providia9682, providia9685, cyber9382, cyber9385, 3dimage975, 3dimage985, blade3d, cyberbladei7, cyberbladei7d, cyberbladei1, cyberbladei1d, cyberbladeAi1, cyberbladeAi1d, bladeXP, cyberbladeXPAi1 (II) Primary Device is: PCI 00:03:0 (--) Chipset tgui9660 found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x07ffffff (0x7f00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) [6] -1 0 0x08800000 - 0x08bfffff (0x400000) MX[B](B) [7] -1 0 0x08400000 - 0x0840ffff (0x10000) MX[B](B) [8] -1 0 0x08000000 - 0x083fffff (0x400000) MX[B](B) [9] -1 0 0x10000000 - 0x100000ff (0x100) MX[B](B) [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [12] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]E (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x07ffffff (0x7f00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) [6] -1 0 0x08800000 - 0x08bfffff (0x400000) MX[B](B) [7] -1 0 0x08400000 - 0x0840ffff (0x10000) MX[B](B) [8] -1 0 0x08000000 - 0x083fffff (0x400000) MX[B](B) [9] -1 0 0x10000000 - 0x100000ff (0x100) MX[B](B) [10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]E [16] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [17] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (**) TRIDENT(0): Depth 16, (--) framebuffer bpp 16 (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.2.99.3, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) TRIDENT(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.2.99.3, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (==) TRIDENT(0): RGB weight 565 (==) TRIDENT(0): Default visual is TrueColor (==) TRIDENT(0): Using gamma correction (1.0, 1.0, 1.0) (**) TRIDENT(0): Option "CyberStretch" "True" (**) TRIDENT(0): Cyber Stretch enabled (==) TRIDENT(0): Linear framebuffer at 0x8000000 (--) TRIDENT(0): IO registers at 0x8400000 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.2.99.3, module version = 1.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.2.99.3, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) TRIDENT(0): initializing int10 (II) TRIDENT(0): Primary V_BIOS segment is: 0xc000 (WW) System lacks support for changing MTRRs (II) TRIDENT(0): VESA BIOS detected (II) TRIDENT(0): VESA VBE Version 1.2 (II) TRIDENT(0): VESA VBE Total Mem: 2048 kB (II) TRIDENT(0): VESA VBE OEM: Copyright 1994 TRIDENT MICROSYSTEMS INC. (--) TRIDENT(0): Revision is 51 (--) TRIDENT(0): Found Cyber 9385 chip (--) TRIDENT(0): RAM type is EDO Ram (--) TRIDENT(0): Using HW cursor (--) TRIDENT(0): VideoRAM: 2048 kByte (--) TRIDENT(0): TFT Panel 1024x768 found (--) TRIDENT(0): Memory Clock is 42.95 MHz (==) TRIDENT(0): Min pixel clock is 12 MHz (--) TRIDENT(0): Max pixel clock is 170 MHz (II) TRIDENT(0): Monitor0: Using hsync range of 31.50-48.50 kHz (WW) TRIDENT(0): Monitor0: using default vrefresh range of 43.00-72.00Hz (II) TRIDENT(0): Clock range: 12.00 to 170.00 MHz (II) TRIDENT(0): Not using default mode "640x350" (vrefresh out of range) (II) TRIDENT(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "640x400" (vrefresh out of range) (II) TRIDENT(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "720x400" (vrefresh out of range) (II) TRIDENT(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "640x480" (vrefresh out of range) (II) TRIDENT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "640x480" (vrefresh out of range) (II) TRIDENT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "640x480" (vrefresh out of range) (II) TRIDENT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "800x600" (vrefresh out of range) (II) TRIDENT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "800x600" (hsync out of range) (II) TRIDENT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1024x768" (vrefresh out of range) (II) TRIDENT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1024x768" (hsync out of range) (II) TRIDENT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1024x768" (hsync out of range) (II) TRIDENT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1024x768" (hsync out of range) (II) TRIDENT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Removing mode (1152x864) larger than the LCD panel (1024x768) (II) TRIDENT(0): Not using default mode "1152x864" (unknown reason) (II) TRIDENT(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1280x960" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1280x960" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1280x1024" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1280x1024" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1280x1024" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1792x1344" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1792x1344" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1856x1392" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1856x1392" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "832x624" (hsync out of range) (II) TRIDENT(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Removing mode (1152x768) larger than the LCD panel (1024x768) (II) TRIDENT(0): Not using default mode "1152x768" (unknown reason) (II) TRIDENT(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1400x1050" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1400x1050" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1600x1024" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "2048x1536" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "2048x1536" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "2048x1536" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (--) TRIDENT(0): Virtual size is 1024x768 (pitch 1024) (**) TRIDENT(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (II) TRIDENT(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (**) TRIDENT(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz (II) TRIDENT(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (**) TRIDENT(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz (II) TRIDENT(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (**) TRIDENT(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) TRIDENT(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (**) TRIDENT(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz (II) TRIDENT(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (++) TRIDENT(0): DPI set to (100, 100) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.2.99.3, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.2 (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Loading /usr/X11R6/lib/modules/libi2c.a (II) Module i2c: vendor="The XFree86 Project" compiled for 4.2.99.3, module version = 1.2.0 ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.2.99.3, module version = 1.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.2.99.3, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0x08800000 - 0x08bfffff (0x400000) MX[B] [1] 0 0 0x08400000 - 0x0840ffff (0x10000) MX[B] [2] 0 0 0x08000000 - 0x083fffff (0x400000) MX[B] [3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [4] -1 0 0x00100000 - 0x07ffffff (0x7f00000) MX[B]E(B) [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [6] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B] [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [8] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) [9] -1 0 0x08800000 - 0x08bfffff (0x400000) MX[B](B) [10] -1 0 0x08400000 - 0x0840ffff (0x10000) MX[B](B) [11] -1 0 0x08000000 - 0x083fffff (0x400000) MX[B](B) [12] -1 0 0x10000000 - 0x100000ff (0x100) MX[B](B) [13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU) [14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU) [15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU) [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [18] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]E [19] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [20] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a (II) TRIDENT(0): Initializing int10 (II) TRIDENT(0): Primary V_BIOS segment is: 0xc000 (II) TRIDENT(0): Overriding Horizontal timings. (II) TRIDENT(0): Shadow off (II) TRIDENT(0): H-timing shadow registers: 0xa3 0x00 0x84 0x94 (II) TRIDENT(0): H-timing registers: 0xa3 0x7f 0x7f 0x00 0x84 0x94 (II) TRIDENT(0): V-timing shadow registers: 0x24 0xf5 0x03 0x09 0x24 (0x08) (II) TRIDENT(0): V-timing registers: 0x24 0xf5 0x03 0x09 0xff 0x00 0x24 (II) TRIDENT(0): Setting BIOS Mode: 79 (II) TRIDENT(0): Enabling StretchMode (II) TRIDENT(0): Found Clock 65.00 n=219 m=23 k=1 (II) TRIDENT(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Solid Lines Dashed Lines Offscreen Pixmaps Setting up tile and stipple cache: 8 128x128 slots 32 8x8 color expansion slots (==) TRIDENT(0): Backing store disabled (==) TRIDENT(0): Silken mouse enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (**) Option "Protocol" "MouseSystems" (**) Mouse0: Protocol: "MouseSystems" (**) Option "CorePointer" (**) Mouse0: Core Pointer (**) Option "Device" "/dev/gpmdata" (**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50 (==) Mouse0: Buttons: 3 (**) Option "BaudRate" "1200" (**) Mouse0: BaudRate: 1200 (II) Keyboard "Keyboard0" handled by legacy driver (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) GetModeLine - scrn: 0 clock: 65000 GetModeLine - hdsp: 1024 hbeg: 1048 hend: 1184 httl: 1344 vdsp: 768 vbeg: 771 vend: 777 vttl: 806 flags: 10 (II) TRIDENT(0): Overriding Horizontal timings. (II) TRIDENT(0): Shadow off (II) TRIDENT(0): H-timing shadow registers: 0xa3 0x00 0x84 0x94 (II) TRIDENT(0): H-timing registers: 0xa3 0x4f 0x4f 0x00 0x84 0x94 (II) TRIDENT(0): V-timing shadow registers: 0x24 0xbf 0x03 0x09 0x24 (0x08) (II) TRIDENT(0): V-timing registers: 0x24 0xbf 0x03 0x09 0xdf 0x00 0x24 (II) TRIDENT(0): Setting BIOS Mode: 79 (II) TRIDENT(0): Enabling StretchMode (II) TRIDENT(0): Found Clock 65.00 n=219 m=23 k=1 (II) TRIDENT(0): Overriding Horizontal timings. (II) TRIDENT(0): Shadow on (II) TRIDENT(0): H-timing shadow registers: 0xa3 0x00 0x84 0x94 (II) TRIDENT(0): H-timing registers: 0xa3 0x7f 0x7f 0x86 0x83 0x94 (II) TRIDENT(0): V-timing shadow registers: 0x24 0xf5 0x03 0x09 0x24 (0x08) (II) TRIDENT(0): V-timing registers: 0x24 0xf5 0x03 0x29 0xff 0x00 0x24 (II) TRIDENT(0): Setting BIOS Mode: 75 (II) TRIDENT(0): Enabling StretchMode (II) TRIDENT(0): Found Clock 65.00 n=219 m=23 k=1 Repeat By: (I'd use mplayer, as it is easy to obtain an arbitrary image size without looking for sample movies of particular widths. MPlayer is from cvs 9/Jan/03, but 0.90rc2 will do.) 1) mplayer -vo xv test.avi -vop scale=384: 2) mplayer -vo xv test.avi -vop scale=504: 3) mplayer -vo xv test.avi -vop scale=512: _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
