Hello, pls check your modelines.Sure 2048x1536 to to high. The Radeon can only drive DVI-Single Link, means max resolution 1600x1200 on the DVI Port. If that Panel is 20" I suggest it would do 1600x1200 max. So the Modelines schould start with 140-160 Mhz Dotclock, 1600......... You should also take a look at ATI Webpage, they,re offering closed source driver for Linux.May the Radeon 7500 is supported by that driver. These modelines drive a SXGA 18,1" Sharp Panel: Modeline "1280x1024" 110 1280 1296 1552 1664 1024 1024 1034 1070
Best regards Detlef Bjoern Leonhardt wrote: > > Hello, > > I have a problem running X with DVI Digital output on an external IBM flat > panel T210. It's only running in ANALOG mode. > It is not possible to switch to DVI Digital ouput under Linux Redhat 8.0, > but "under Windows 2000" it works. That means the hardware should be ok. > After spending hours in trying to get it work and searching the internet > for help , I hope someone can help me and tell me what I'm doing wrong or > where the problem is located. > I really appreciate your help. I have attached my XF86Config file and the _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
