On Sun, 19 Jan 2003, Massimo wrote: > In the attempt to shape Open GL correctly I have unloaded xfree > 4.2.0 and the drivers fglrx-glc22-4.2.0-2.5.1.i586.rpm from the > situated Ati. Unfortunately however once adjourned Xfree it hauls > version 4.2.0 and installed the drivers, don't succeed to starting X > anymore!! > I bring a part of the file XFree86.0.log:
Here is the problem: > (II) Primary Device is: PCI 01:00:0 > (WW) fglrx: No matching Device section for instance (BusID PCI:1:0:0) found > (EE) No devices detected. The ATI configuration script doesn't set the BusID correctly for your card. To find the correct ID, use lspci. For example, on my machine: williamg@officebedroom:~> /sbin/lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System Controller (rev 11) [---snip---] 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon R250 If [Radeon 9000] (rev 01) This last line is the Radeon card. When you have this number, look in your XF86Config file (usually /etc/X11/XF86Config), and find the "Device" section for your card ... something like: Section "Device" BoardName "RV250 If" BusID "1:5:0" Driver "radeon" Identifier "Device0" VendorName "ATI" # Option "NoDDC" EndSection And make sure that the BusID line matches the output of lspci - so on my machine, 01:05.0 -> "1:5:0" Then it should work. Be warned, though, I found it was not stable (lockups with OpenGL). HTH, -- Bill Gallafent. _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
