On Sun, 9 Feb 2003 @ 12:07am (-0500), Brian A. Seklecki wrote:
I have discovered the problem. 1920x1200 is available in `d0ze but is not
drawn correctly simililar to the effect I'm having when I /can/ get the X
server running with the linux binary drive (display compressed into 8" wide
and twice overlapped). Only 1600x1200 is available in `d0z3 until you select
the appropriate "scaling" option in the advanced menu.
I went looking for the equivilant in the linux binary driver and found:
[...]
panels as a comma-separated list of property=value pairs.
Currently, the only two available properties are 'Scaling'
and 'Dithering'. The possible values for 'Scaling' are:
'default' (the driver will use whatever scaling state
is current), 'native' (the driver will use the flat
panel's scaler, if it has one), 'scaled' (the driver
will use the NVIDIA scaler, if possible), 'centered'
(the driver will center the image, if possible),
and 'aspect-scaled' (the driver will scale with the
NVIDIA scaler, but keep the aspect ratio correct).
The possible values for 'Dithering' are: 'default'
(the driver will decide when to dither), 'enabled' (the
driver will always dither when possible), and 'disabled'
(the driver will never dither). If any property is not
specified, it's value shall be 'default'. An example
properties string might look like:
"Scaling = centered, Dithering = enabled"
I will try this out, however I am unsure which option in `d0z3 correlates w/
which flag here. "Monitor Scaling" is greyed out in `d0z3 so we can
eliminate 'native'
-lava
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
