On Sat, 2003-02-22 at 10:44, Kevin B. Payne wrote: > Well, the set X to output different refresh rates you could just edit > /etc/X11/XF86Config file by hand and change the value for VertRefresh under > the section "Monitor" to 50... Always write down your current settings > before making any changes and DO NOT make this change unless you know how to > reset this setting from terminal mode... > If you have a true PNP monitor then at this setting you should at least get > a viewable picture and then you can fine tune the picture on the monitor > itself. > I tried editing XF86Config (to 50hz) but I just got a message that it could not find a valid screen (Changed it back and it is back to normal). What I can't understand is how come the windows driver works fine? the output from the computer is 50hz and shows on the monitor OK. (at 800x600) so I should be able to set linux to 50hz 800x600 and get a picture but the driver seems to want to change to 25hz?
Tony _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
