I tried that and got a little further, I think. Right now i am getting a "Fatal server error: Caught signal 11. Server aborting"
my XFree86.0.log looks like this; XFree86 Version 4.1.0 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 2 June 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.2.19 i686 [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Thu Mar 8 07:12:57 1990 (==) Using config file: "/etc/X11/XF86Config" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout "Simple Layout" (**) |-->Screen "Screen 1" (0) (**) | |-->Monitor "Monitor A" (**) | |-->Device "Video Card A" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc104" (**) XKB: model: "pc104" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/l ib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.4 XFree86 XInput driver : 0.2 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.2 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.2 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (II) PCI: Probing config type using method 1 (II) PCI: Standard check for type 1 failed. (II) PCI: stages = 0x00, oldVal1 = 0xffffffff, mode1Res1 = 0x00000000, mode1Res2 = 0x00000000 (II) PCI: No PCI bus found (II) Addressable bus resource ranges are [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.2 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.1.9 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.2 (II) Loading font FreeType (II) LoadModule: "chips" (II) Loading /usr/X11R6/lib/modules/drivers/chips_drv.o (II) Module chips: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.4 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.2 (II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300 (II) Primary Device is: ISA (--) Chipset ct65540 found (II) resource ranges after xf86ClaimFixedResources() call: [0] 0 0x000b8000 - 0x000bffff (0x8000) MX[B] [1] 0 0x000b0000 - 0x000b7fff (0x8000) MX[B] [2] 0 0x000a0000 - 0x000affff (0x10000) MX[B] [3] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [4] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [5] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [6] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [7] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [8] 0 0x000003c0 - 0x000003df (0x20) IX[B] [9] 0 0x000003b0 - 0x000003bb (0xc) IX[B] [10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [11] -1 0x00000000 - 0x000000ff (0x100) IX[B] (II) resource ranges after probing: [0] 0 0x000b8000 - 0x000bffff (0x8000) MX[B] [1] 0 0x000b0000 - 0x000b7fff (0x8000) MX[B] [2] 0 0x000a0000 - 0x000affff (0x10000) MX[B] [3] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [4] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [5] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [6] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [7] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [8] 0 0x000003c0 - 0x000003df (0x20) IX[B] [9] 0 0x000003b0 - 0x000003bb (0xc) IX[B] [10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [11] -1 0x00000000 - 0x000000ff (0x100) IX[B] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.4 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.4 (II) CHIPS(0): initializing int10 (II) CHIPS(0): Primary V_BIOS segment is: 0xe000 (II) CHIPS(0): VESA BIOS detected (II) CHIPS(0): VESA VBE Version 1.10 (II) CHIPS(0): VESA VBE Total Mem: 1024 kB (II) CHIPS(0): VESA VBE OEM: CHIPS 65520/525/530 Flat Panel VGA (**) CHIPS(0): Depth 4, (--) framebuffer bpp 4 (==) CHIPS(0): Default visual is StaticColor (==) CHIPS(0): Using gamma correction (1.0, 1.0, 1.0) (==) CHIPS(0): Using SW cursor (--) CHIPS(0): VideoRAM: 1024 kByte (**) CHIPS(0): Disabling linear addressing (--) CHIPS(0): DD-STN probed (--) CHIPS(0): LCD/CRT (--) CHIPS(0): Display Size: x=640; y=480 (--) CHIPS(0): Frame Buffer used (--) CHIPS(0): Using embedded Frame Buffer, size 61440 bytes (--) CHIPS(0): Frame accelerator enabled (--) CHIPS(0): VL Bus (--) CHIPS(0): Disabling acceleration for 4 bpp (--) CHIPS(0): Internal DAC disabled (--) CHIPS(0): Synchronous reset ignored. (--) CHIPS(0): Using programmable clocks (==) CHIPS(0): Min pixel clock is 11.000 MHz (--) CHIPS(0): Max pixel clock is 68.000 MHz (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.4 (II) CHIPS(0): Monitor A: Using hsync value of 31.50 kHz (II) CHIPS(0): Monitor A: Using vrefresh range of 40.00-150.00 Hz (II) CHIPS(0): Clock range: 11.00 to 68.00 MHz (II) CHIPS(0): Not using default mode "640x350" (hsync out of range) (II) CHIPS(0): Not using default mode "640x400" (hsync out of range) (II) CHIPS(0): Not using default mode "720x400" (hsync out of range) (II) CHIPS(0): Not using default mode "640x480" (hsync out of range) (II) CHIPS(0): Not using default mode "640x480" (hsync out of range) (II) CHIPS(0): Not using default mode "640x480" (hsync out of range) (II) CHIPS(0): Not using default mode "800x600" (hsync out of range) (II) CHIPS(0): Not using default mode "800x600" (hsync out of range) (II) CHIPS(0): Not using default mode "800x600" (hsync out of range) (II) CHIPS(0): Not using default mode "800x600" (hsync out of range) (II) CHIPS(0): Not using default mode "800x600" (hsync out of range) (II) CHIPS(0): Not using default mode "1024x768" (width too large for virtual size) (II) CHIPS(0): Not using default mode "1024x768" (width too large for virtual size) (II) CHIPS(0): Not using default mode "1024x768" (width too large for virtual size) (II) CHIPS(0): Not using default mode "1024x768" (width too large for virtual size) (II) CHIPS(0): Not using default mode "1024x768" (width too large for virtual size) (II) CHIPS(0): Not using default mode "1152x864" (width too large for virtual size) (II) CHIPS(0): Not using default mode "1280x960" (width too large for virtual size) (II) CHIPS(0): Not using default mode "1280x960" (width too large for virtual size) (II) CHIPS(0): Not using default mode "1280x1024" (width too large for virtual size) (II) CHIPS(0): Not using default mode "1280x1024" (width too large for virtual size) (II) CHIPS(0): Not using default mode "1280x1024" (width too large for virtual size) (II) CHIPS(0): Not using default mode "1600x1200" (width too large for virtual size) (II) CHIPS(0): Not using default mode "1600x1200" (width too large for virtual size) (II) CHIPS(0): Not using default mode "1600x1200" (width too large for virtual size) (II) CHIPS(0): Not using default mode "1600x1200" (width too large for virtual size) (II) CHIPS(0): Not using default mode "1600x1200" (width too large for virtual size) (II) CHIPS(0): Not using default mode "1792x1344" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "1792x1344" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "1856x1392" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "1856x1392" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) CHIPS(0): Not using default mode "1400x1050" (width too large for virtual size) (II) CHIPS(0): Not using default mode "1400x1050" (width too large for virtual size) (II) CHIPS(0): Not using mode "800x600" (no mode of this name) (**) CHIPS(0): Virtual size is 800x600 (pitch 832) (**) CHIPS(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz (II) CHIPS(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (==) CHIPS(0): DPI set to (75, 75) (II) Loading sub module "xf4bpp" (II) LoadModule: "xf4bpp" (II) Loading /usr/X11R6/lib/modules/libxf4bpp.a (II) Module xf4bpp: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.1 (II) Loading sub module "xf1bpp" (II) LoadModule: "xf1bpp" (II) Loading /usr/X11R6/lib/modules/libxf1bpp.a (II) Module xf1bpp: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.1 (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0x000b8000 - 0x000bffff (0x8000) MX[B] [1] 0 0x000b0000 - 0x000b7fff (0x8000) MX[B] [2] 0 0x000a0000 - 0x000affff (0x10000) MX[B] [3] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [4] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [5] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [6] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [7] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [8] 0 0x000003c0 - 0x000003df (0x20) IX[B] [9] 0 0x000003b0 - 0x000003bb (0xc) IX[B] [10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [11] -1 0x00000000 - 0x000000ff (0x100) IX[B] Fatal server error: Caught signal 11. Server aborting And my config file like this; # File generated by xf86config. # # Copyright (c) 1999 by The XFree86 Project, Inc. # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of the XFree86 Project shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from the # XFree86 Project. # # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** # ********************************************************************** # Module section -- this section is used to specify # which dynamically loadable modules to load. # ********************************************************************** # Section "Module" # This loads the DBE extension module. Load "dbe" # Double buffer extension # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection "extmod" Option "omit xfree86-dga" # don't initialise the DGA extension EndSubSection # This loads the Type1 and FreeType font modules Load "type1" Load "freetype" # This loads the GLX module # Load "glx" EndSection # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # FontPath "/usr/X11R6/lib/X11/fonts/local/" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" # FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" # FontPath "/usr/X11R6/lib/X11/fonts/Type1/" # FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" # FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" # The module search path. The default path is shown here. # ModulePath "/usr/X11R6/lib/modules" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # Option "NoTrapSignals" # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence # This allows clients to receive this key event. # Option "DontZap" # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching # sequences. This allows clients to receive these key events. # Option "Dont Zoom" # Uncomment this to disable tuning with the xvidtune client. With # it the client can still run and fetch card and monitor attributes, # but it will not be allowed to change them. If it tries it will # receive a protocol error. # Option "DisableVidModeExtension" # Uncomment this to enable the use of a non-local xvidtune client. # Option "AllowNonLocalXvidtune" # Uncomment this to disable dynamically modifying the input device # (mouse and keyboard) settings. # Option "DisableModInDev" # Uncomment this to enable the use of a non-local client to # change the keyboard or mouse settings (currently only xset). # Option "AllowNonLocalModInDev" EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Core keyboard's InputDevice section # ********************************************************************** Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" # For most OSs the protocol can be omitted (it defaults to "Standard"). # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), # uncomment the following line. # Option "Protocol" "Xqueue" Option "AutoRepeat" "500 30" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # Option "LeftAlt" "Meta" # Option "RightAlt" "ModeShift" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # These are the default XKB settings for XFree86 # Option "XkbRules" "xfree86" # Option "XkbModel" "pc101" # Option "XkbLayout" "us" # Option "XkbVariant" "" # Option "XkbOptions" "" # Option "XkbDisable" Option "XkbRules" "xfree86" Option "XkbModel" "pc104" Option "XkbLayout" "us" EndSection # ********************************************************************** # Core Pointer's InputDevice section # ********************************************************************** Section "InputDevice" # Identifier and driver Identifier "Mouse1" Driver "mouse" Option "Protocol" "Microsoft" Option "Device" "/dev/mouse" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Option "Protocol" "Xqueue" # Baudrate and SampleRate are only for some Logitech mice. In # almost every case these lines should be omitted. # Option "BaudRate" "9600" # Option "SampleRate" "150" # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) # Option "Emulate3Buttons" # Option "Emulate3Timeout" "50" # ChordMiddle is an option for some 3-button Logitech mice # Option "ChordMiddle" EndSection # ********************************************************************** # Other input device sections # this is optional and is required only if you # are using extended input devices. This is for example only. Refer # to the XF86Config man page for a description of the options. # ********************************************************************** # # Section "InputDevice" # Identifier "Mouse2" # Driver "mouse" # Option "Protocol" "MouseMan" # Option "Device" "/dev/mouse2" # EndSection # # Section "InputDevice" # Identifier "spaceball" # Driver "magellan" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "spaceball2" # Driver "spaceorb" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "touchscreen0" # Driver "microtouch" # Option "Device" "/dev/ttyS0" # Option "MinX" "1412" # Option "MaxX" "15184" # Option "MinY" "15372" # Option "MaxY" "1230" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # # Section "InputDevice" # Identifier "touchscreen1" # Driver "elo2300" # Option "Device" "/dev/ttyS0" # Option "MinX" "231" # Option "MaxX" "3868" # Option "MinY" "3858" # Option "MaxY" "272" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonThreshold" "17" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "Monitor A" # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 31.5 # HorizSync 30-64 # multisync # HorizSync 31.5, 35.2 # multiple fixed sync frequencies # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 40-150 EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present # Standard VGA Device: Section "Device" Identifier "Standard VGA" VendorName "Unknown" BoardName "Unknown" # The chipset line is optional in most cases. It can be used to override # the driver's chipset detection, and should not normally be specified. # Chipset "generic" # The Driver line must be present. When using run-time loadable driver # modules, this line instructs the server to load the specified driver # module. Even when not using loadable driver modules, this line # indicates which driver should interpret the information in this section. Driver "vga" # The BusID line is used to specify which of possibly multiple devices # this section is intended for. When this line isn't present, a device # section can only match up with the primary video device. For PCI # devices a line like the following could be used. This line should not # normally be included unless there is more than one video device # intalled. # BusID "PCI:0:10:0" # VideoRam 256 # Clocks 25.2 28.3 EndSection # Device configured by xf86config: Section "Device" Identifier "Video Card A" Driver "chips" #VideoRam 1024 # Option "NoAccel" # Option "use_18bit_bus" # Option "hw_clocks" # Textclockfreq 25.175 # Option "nolinear" # MemBase 0x03b00000 # Device section for C&T cards. # Option "suspend_hack" # Option "STN" # Option "no_stretch" # Option "no_center" # Option "use_modeline" # Option "fix_panel_size" # videoram 512 # Insert Clocks lines here if appropriate EndSection # ********************************************************************** # Screen sections # ********************************************************************** # Any number of screen sections may be present. Each describes # the configuration of a single screen. A single specific screen section # may be specified from the X server command line with the "-screen" # option. Section "Screen" Identifier "Screen 1" Device "Video Card A" Monitor "Monitor A" DefaultDepth 4 Subsection "Display" Depth 4 Modes "640x480" "800x600" ViewPort 0 0 Virtual 800 600 EndSubsection EndSection # ********************************************************************** # ServerLayout sections. # ********************************************************************** # Any number of ServerLayout sections may be present. Each describes # the way multiple screens are organised. A specific ServerLayout # section may be specified from the X server command line with the # "-layout" option. In the absence of this, the first section is used. # When now ServerLayout section is present, the first Screen section # is used alone. Section "ServerLayout" # The Identifier line must be present Identifier "Simple Layout" # Each Screen line specifies a Screen section name, and optionally # the relative position of other screens. The four names after # primary screen name are the screens to the top, bottom, left and right # of the primary screen. In this example, screen 2 is located to the # right of screen 1. Screen "Screen 1" # Each InputDevice line specifies an InputDevice section name and # optionally some options to specify the way the device is to be # used. Those options include "CorePointer", "CoreKeyboard" and # "SendCoreEvents". InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSection Thanks in Advance for your time and efforts -scott [EMAIL PROTECTED] ----- Original Message ----- From: "Cynthia Grossen" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, February 25, 2003 5:57 AM Subject: RE: [XFree86] Fw: please help > (EE) CHIPS(0): No Display subsection in Screen section "Screen 1" for > depth/fbbpp 4/4 > > you need to modify your XF86config file. Add a section like: > Section "Screen" > Identifier "Screen0" > Device "Card0" > Monitor "Monitor0" > DefaultDepth 16 > SubSection "Display" > Depth 1 > EndSubSection > SubSection "Display" > Depth 4 > EndSubSection > SubSection "Display" > Depth 8 > EndSubSection > SubSection "Display" > Depth 15 > EndSubSection > SubSection "Display" > Depth 16 > Modes "1024x768" "800x600" "640x480" > # "1280x1024" "1600x1200" "1920x1440" > EndSubSection > SubSection "Display" > Depth 24 > EndSubSection > EndSection > _______________________________________________ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 > >
XFree86.0.log
Description: Binary data
XF86Config
Description: Binary data
