Try Option "SWcursor"
in your device section D. According to Scott Elgram <[EMAIL PROTECTED]> (on 02/25/03): > I tried that and got a little further, I think. Right now i am getting a > "Fatal server error: Caught signal 11. Server aborting" > > my XFree86.0.log looks like this; > > XFree86 Version 4.1.0 / X Window System > (protocol Version 11, revision 0, vendor release 6510) > Release Date: 2 June 2001 > If the server is older than 6-12 months, or if your card is > newer than the above date, look for a newer version before > reporting problems. (See http://www.XFree86.Org/FAQ) > Build Operating System: Linux 2.2.19 i686 [ELF] > Module Loader present > (==) Log file: "/var/log/XFree86.0.log", Time: Thu Mar 8 07:12:57 1990 > (==) Using config file: "/etc/X11/XF86Config" > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) ServerLayout "Simple Layout" > (**) |-->Screen "Screen 1" (0) > (**) | |-->Monitor "Monitor A" > (**) | |-->Device "Video Card A" > (**) |-->Input Device "Mouse1" > (**) |-->Input Device "Keyboard1" > (**) Option "AutoRepeat" "500 30" > (**) Option "XkbRules" "xfree86" > (**) XKB: rules: "xfree86" > (**) Option "XkbModel" "pc104" > (**) XKB: model: "pc104" > (**) Option "XkbLayout" "us" > (**) XKB: layout: "us" > (==) Keyboard: CustomKeycode disabled > (**) FontPath set to > "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/l > ib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/" > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (==) ModulePath set to "/usr/X11R6/lib/modules" > (--) using VT number 7 > (II) Open APM successful > (II) Module ABI versions: > XFree86 ANSI C Emulation: 0.1 > XFree86 Video Driver: 0.4 > XFree86 XInput driver : 0.2 > XFree86 Server Extension : 0.1 > XFree86 Font Renderer : 0.2 > (II) Loader running on linux > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.2 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.4 > (II) PCI: Probing config type using method 1 > (II) PCI: Standard check for type 1 failed. > (II) PCI: stages = 0x00, oldVal1 = 0xffffffff, > mode1Res1 = 0x00000000, mode1Res2 = 0x00000000 > (II) PCI: No PCI bus found > (II) Addressable bus resource ranges are > [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] > [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) OS-reported resource ranges: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] > (II) OS-reported resource ranges after removing overlaps with PCI: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] > (II) All system resource ranges: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] > (II) LoadModule: "dbe" > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a > (II) Module dbe: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "extmod" > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a > (II) Module extmod: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension SHAPE > (II) Loading extension MIT-SUNDRY-NONSTANDARD > (II) Loading extension BIG-REQUESTS > (II) Loading extension SYNC > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XC-MISC > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-Misc > (II) Loading extension DPMS > (II) Loading extension FontCache > (II) Loading extension TOG-CUP > (II) Loading extension Extended-Visual-Information > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) LoadModule: "type1" > (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a > (II) Module type1: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.2 > (II) Loading font Type1 > (II) Loading font CID > (II) LoadModule: "freetype" > (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a > (II) Module freetype: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.1.9 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.2 > (II) Loading font FreeType > (II) LoadModule: "chips" > (II) Loading /usr/X11R6/lib/modules/drivers/chips_drv.o > (II) Module chips: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > Module class: XFree86 Video Driver > ABI class: XFree86 Video Driver, version 0.4 > (II) LoadModule: "mouse" > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o > (II) Module mouse: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > Module class: XFree86 XInput Driver > ABI class: XFree86 XInput driver, version 0.2 > (II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, ct65525, > ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, > ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300 > (II) Primary Device is: ISA > (--) Chipset ct65540 found > (II) resource ranges after xf86ClaimFixedResources() call: > [0] 0 0x000b8000 - 0x000bffff (0x8000) MX[B] > [1] 0 0x000b0000 - 0x000b7fff (0x8000) MX[B] > [2] 0 0x000a0000 - 0x000affff (0x10000) MX[B] > [3] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [4] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [5] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [6] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [7] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [8] 0 0x000003c0 - 0x000003df (0x20) IX[B] > [9] 0 0x000003b0 - 0x000003bb (0xc) IX[B] > [10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [11] -1 0x00000000 - 0x000000ff (0x100) IX[B] > (II) resource ranges after probing: > [0] 0 0x000b8000 - 0x000bffff (0x8000) MX[B] > [1] 0 0x000b0000 - 0x000b7fff (0x8000) MX[B] > [2] 0 0x000a0000 - 0x000affff (0x10000) MX[B] > [3] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [4] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [5] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [6] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [7] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [8] 0 0x000003c0 - 0x000003df (0x20) IX[B] > [9] 0 0x000003b0 - 0x000003bb (0xc) IX[B] > [10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [11] -1 0x00000000 - 0x000000ff (0x100) IX[B] > (II) Loading sub module "vgahw" > (II) LoadModule: "vgahw" > (II) Loading /usr/X11R6/lib/modules/libvgahw.a > (II) Module vgahw: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.4 > (II) Loading sub module "vbe" > (II) LoadModule: "vbe" > (II) Loading /usr/X11R6/lib/modules/libvbe.a > (II) Module vbe: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.4 > (II) Loading sub module "int10" > (II) LoadModule: "int10" > (II) Loading /usr/X11R6/lib/modules/linux/libint10.a > (II) Module int10: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.4 > (II) CHIPS(0): initializing int10 > (II) CHIPS(0): Primary V_BIOS segment is: 0xe000 > (II) CHIPS(0): VESA BIOS detected > (II) CHIPS(0): VESA VBE Version 1.10 > (II) CHIPS(0): VESA VBE Total Mem: 1024 kB > (II) CHIPS(0): VESA VBE OEM: CHIPS 65520/525/530 Flat Panel VGA > (**) CHIPS(0): Depth 4, (--) framebuffer bpp 4 > (==) CHIPS(0): Default visual is StaticColor > (==) CHIPS(0): Using gamma correction (1.0, 1.0, 1.0) > (==) CHIPS(0): Using SW cursor > (--) CHIPS(0): VideoRAM: 1024 kByte > (**) CHIPS(0): Disabling linear addressing > (--) CHIPS(0): DD-STN probed > (--) CHIPS(0): LCD/CRT > (--) CHIPS(0): Display Size: x=640; y=480 > (--) CHIPS(0): Frame Buffer used > (--) CHIPS(0): Using embedded Frame Buffer, size 61440 bytes > (--) CHIPS(0): Frame accelerator enabled > (--) CHIPS(0): VL Bus > (--) CHIPS(0): Disabling acceleration for 4 bpp > (--) CHIPS(0): Internal DAC disabled > (--) CHIPS(0): Synchronous reset ignored. > (--) CHIPS(0): Using programmable clocks > (==) CHIPS(0): Min pixel clock is 11.000 MHz > (--) CHIPS(0): Max pixel clock is 68.000 MHz > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Loading /usr/X11R6/lib/modules/libddc.a > (II) Module ddc: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.4 > (II) CHIPS(0): Monitor A: Using hsync value of 31.50 kHz > (II) CHIPS(0): Monitor A: Using vrefresh range of 40.00-150.00 Hz > (II) CHIPS(0): Clock range: 11.00 to 68.00 MHz > (II) CHIPS(0): Not using default mode "640x350" (hsync out of range) > (II) CHIPS(0): Not using default mode "640x400" (hsync out of range) > (II) CHIPS(0): Not using default mode "720x400" (hsync out of range) > (II) CHIPS(0): Not using default mode "640x480" (hsync out of range) > (II) CHIPS(0): Not using default mode "640x480" (hsync out of range) > (II) CHIPS(0): Not using default mode "640x480" (hsync out of range) > (II) CHIPS(0): Not using default mode "800x600" (hsync out of range) > (II) CHIPS(0): Not using default mode "800x600" (hsync out of range) > (II) CHIPS(0): Not using default mode "800x600" (hsync out of range) > (II) CHIPS(0): Not using default mode "800x600" (hsync out of range) > (II) CHIPS(0): Not using default mode "800x600" (hsync out of range) > (II) CHIPS(0): Not using default mode "1024x768" (width too large for > virtual size) > (II) CHIPS(0): Not using default mode "1024x768" (width too large for > virtual size) > (II) CHIPS(0): Not using default mode "1024x768" (width too large for > virtual size) > (II) CHIPS(0): Not using default mode "1024x768" (width too large for > virtual size) > (II) CHIPS(0): Not using default mode "1024x768" (width too large for > virtual size) > (II) CHIPS(0): Not using default mode "1152x864" (width too large for > virtual size) > (II) CHIPS(0): Not using default mode "1280x960" (width too large for > virtual size) > (II) CHIPS(0): Not using default mode "1280x960" (width too large for > virtual size) > (II) CHIPS(0): Not using default mode "1280x1024" (width too large for > virtual size) > (II) CHIPS(0): Not using default mode "1280x1024" (width too large for > virtual size) > (II) CHIPS(0): Not using default mode "1280x1024" (width too large for > virtual size) > (II) CHIPS(0): Not using default mode "1600x1200" (width too large for > virtual size) > (II) CHIPS(0): Not using default mode "1600x1200" (width too large for > virtual size) > (II) CHIPS(0): Not using default mode "1600x1200" (width too large for > virtual size) > (II) CHIPS(0): Not using default mode "1600x1200" (width too large for > virtual size) > (II) CHIPS(0): Not using default mode "1600x1200" (width too large for > virtual size) > (II) CHIPS(0): Not using default mode "1792x1344" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1792x1344" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1856x1392" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1856x1392" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1920x1440" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1920x1440" (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1400x1050" (width too large for > virtual size) > (II) CHIPS(0): Not using default mode "1400x1050" (width too large for > virtual size) > (II) CHIPS(0): Not using mode "800x600" (no mode of this name) > (**) CHIPS(0): Virtual size is 800x600 (pitch 832) > (**) CHIPS(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz > (II) CHIPS(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 > 525 -hsync -vsync > (==) CHIPS(0): DPI set to (75, 75) > (II) Loading sub module "xf4bpp" > (II) LoadModule: "xf4bpp" > (II) Loading /usr/X11R6/lib/modules/libxf4bpp.a > (II) Module xf4bpp: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > ABI class: XFree86 ANSI C Emulation, version 0.1 > (II) Loading sub module "xf1bpp" > (II) LoadModule: "xf1bpp" > (II) Loading /usr/X11R6/lib/modules/libxf1bpp.a > (II) Module xf1bpp: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > ABI class: XFree86 ANSI C Emulation, version 0.1 > (II) do I need RAC? No, I don't. > (II) resource ranges after preInit: > [0] 0 0x000b8000 - 0x000bffff (0x8000) MX[B] > [1] 0 0x000b0000 - 0x000b7fff (0x8000) MX[B] > [2] 0 0x000a0000 - 0x000affff (0x10000) MX[B] > [3] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [4] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [5] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [6] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [7] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [8] 0 0x000003c0 - 0x000003df (0x20) IX[B] > [9] 0 0x000003b0 - 0x000003bb (0xc) IX[B] > [10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [11] -1 0x00000000 - 0x000000ff (0x100) IX[B] > Fatal server error: > Caught signal 11. Server aborting > > And my config file like this; > > # File generated by xf86config. > # > # Copyright (c) 1999 by The XFree86 Project, Inc. > # > # Permission is hereby granted, free of charge, to any person obtaining a > # copy of this software and associated documentation files (the "Software"), > # to deal in the Software without restriction, including without limitation > # the rights to use, copy, modify, merge, publish, distribute, sublicense, > # and/or sell copies of the Software, and to permit persons to whom the > # Software is furnished to do so, subject to the following conditions: > # > # The above copyright notice and this permission notice shall be included in > # all copies or substantial portions of the Software. > # > # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR > # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, > # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL > # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF > # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE > # SOFTWARE. > # > # Except as contained in this notice, the name of the XFree86 Project shall > # not be used in advertising or otherwise to promote the sale, use or other > # dealings in this Software without prior written authorization from the > # XFree86 Project. > # > # ********************************************************************** > # Refer to the XF86Config(4/5) man page for details about the format of > # this file. > # ********************************************************************** > # ********************************************************************** > # Module section -- this section is used to specify > # which dynamically loadable modules to load. > # ********************************************************************** > # > Section "Module" > # This loads the DBE extension module. > Load "dbe" # Double buffer extension > # This loads the miscellaneous extensions module, and disables > # initialisation of the XFree86-DGA extension within that module. > SubSection "extmod" > Option "omit xfree86-dga" # don't initialise the DGA extension > EndSubSection > # This loads the Type1 and FreeType font modules > Load "type1" > Load "freetype" > # This loads the GLX module > # Load "glx" > EndSection > # ********************************************************************** > # Files section. This allows default font and rgb paths to be set > # ********************************************************************** > Section "Files" > # The location of the RGB database. Note, this is the name of the > # file minus the extension (like ".txt" or ".db"). There is normally > # no need to change the default. > RgbPath "/usr/X11R6/lib/X11/rgb" > # Multiple FontPath entries are allowed (which are concatenated together), > # as well as specifying multiple comma-separated entries in one FontPath > # command (or a combination of both methods) > # > # If you don't have a floating point coprocessor and emacs, Mosaic or other > # programs take long to start up, try moving the Type1 and Speedo directory > # to the end of this list (or comment them out). > # > FontPath "/usr/X11R6/lib/X11/fonts/local/" > FontPath "/usr/X11R6/lib/X11/fonts/misc/" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" > # FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" > # FontPath "/usr/X11R6/lib/X11/fonts/Type1/" > # FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" > # FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" > # The module search path. The default path is shown here. > # ModulePath "/usr/X11R6/lib/modules" > EndSection > # ********************************************************************** > # Server flags section. > # ********************************************************************** > Section "ServerFlags" > # Uncomment this to cause a core dump at the spot where a signal is > # received. This may leave the console in an unusable state, but may > # provide a better stack trace in the core dump to aid in debugging > # Option "NoTrapSignals" > # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence > # This allows clients to receive this key event. > # Option "DontZap" > # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching > # sequences. This allows clients to receive these key events. > # Option "Dont Zoom" > # Uncomment this to disable tuning with the xvidtune client. With > # it the client can still run and fetch card and monitor attributes, > # but it will not be allowed to change them. If it tries it will > # receive a protocol error. > # Option "DisableVidModeExtension" > # Uncomment this to enable the use of a non-local xvidtune client. > # Option "AllowNonLocalXvidtune" > # Uncomment this to disable dynamically modifying the input device > # (mouse and keyboard) settings. > # Option "DisableModInDev" > # Uncomment this to enable the use of a non-local client to > # change the keyboard or mouse settings (currently only xset). > # Option "AllowNonLocalModInDev" > EndSection > # ********************************************************************** > # Input devices > # ********************************************************************** > # ********************************************************************** > # Core keyboard's InputDevice section > # ********************************************************************** > Section "InputDevice" > Identifier "Keyboard1" > Driver "Keyboard" > # For most OSs the protocol can be omitted (it defaults to "Standard"). > # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), > # uncomment the following line. > # Option "Protocol" "Xqueue" > Option "AutoRepeat" "500 30" > # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) > # Option "Xleds" "1 2 3" > # Option "LeftAlt" "Meta" > # Option "RightAlt" "ModeShift" > # To customise the XKB settings to suit your keyboard, modify the > # lines below (which are the defaults). For example, for a non-U.S. > # keyboard, you will probably want to use: > # Option "XkbModel" "pc102" > # If you have a US Microsoft Natural keyboard, you can use: > # Option "XkbModel" "microsoft" > # > # Then to change the language, change the Layout setting. > # For example, a german layout can be obtained with: > # Option "XkbLayout" "de" > # or: > # Option "XkbLayout" "de" > # Option "XkbVariant" "nodeadkeys" > # > # If you'd like to switch the positions of your capslock and > # control keys, use: > # Option "XkbOptions" "ctrl:swapcaps" > # These are the default XKB settings for XFree86 > # Option "XkbRules" "xfree86" > # Option "XkbModel" "pc101" > # Option "XkbLayout" "us" > # Option "XkbVariant" "" > # Option "XkbOptions" "" > # Option "XkbDisable" > Option "XkbRules" "xfree86" > Option "XkbModel" "pc104" > Option "XkbLayout" "us" > EndSection > > # ********************************************************************** > # Core Pointer's InputDevice section > # ********************************************************************** > Section "InputDevice" > # Identifier and driver > Identifier "Mouse1" > Driver "mouse" > Option "Protocol" "Microsoft" > Option "Device" "/dev/mouse" > # When using XQUEUE, comment out the above two lines, and uncomment > # the following line. > # Option "Protocol" "Xqueue" > # Baudrate and SampleRate are only for some Logitech mice. In > # almost every case these lines should be omitted. > # Option "BaudRate" "9600" > # Option "SampleRate" "150" > # Emulate3Buttons is an option for 2-button Microsoft mice > # Emulate3Timeout is the timeout in milliseconds (default is 50ms) > # Option "Emulate3Buttons" > # Option "Emulate3Timeout" "50" > # ChordMiddle is an option for some 3-button Logitech mice > # Option "ChordMiddle" > EndSection > > # ********************************************************************** > # Other input device sections > # this is optional and is required only if you > # are using extended input devices. This is for example only. Refer > # to the XF86Config man page for a description of the options. > # ********************************************************************** > # > # Section "InputDevice" > # Identifier "Mouse2" > # Driver "mouse" > # Option "Protocol" "MouseMan" > # Option "Device" "/dev/mouse2" > # EndSection > # > # Section "InputDevice" > # Identifier "spaceball" > # Driver "magellan" > # Option "Device" "/dev/cua0" > # EndSection > # > # Section "InputDevice" > # Identifier "spaceball2" > # Driver "spaceorb" > # Option "Device" "/dev/cua0" > # EndSection > # > # Section "InputDevice" > # Identifier "touchscreen0" > # Driver "microtouch" > # Option "Device" "/dev/ttyS0" > # Option "MinX" "1412" > # Option "MaxX" "15184" > # Option "MinY" "15372" > # Option "MaxY" "1230" > # Option "ScreenNumber" "0" > # Option "ReportingMode" "Scaled" > # Option "ButtonNumber" "1" > # Option "SendCoreEvents" > # EndSection > # > # Section "InputDevice" > # Identifier "touchscreen1" > # Driver "elo2300" > # Option "Device" "/dev/ttyS0" > # Option "MinX" "231" > # Option "MaxX" "3868" > # Option "MinY" "3858" > # Option "MaxY" "272" > # Option "ScreenNumber" "0" > # Option "ReportingMode" "Scaled" > # Option "ButtonThreshold" "17" > # Option "ButtonNumber" "1" > # Option "SendCoreEvents" > # EndSection > # ********************************************************************** > # Monitor section > # ********************************************************************** > # Any number of monitor sections may be present > Section "Monitor" > Identifier "Monitor A" > # HorizSync is in kHz unless units are specified. > # HorizSync may be a comma separated list of discrete values, or a > # comma separated list of ranges of values. > # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S > # USER MANUAL FOR THE CORRECT NUMBERS. > HorizSync 31.5 > # HorizSync 30-64 # multisync > # HorizSync 31.5, 35.2 # multiple fixed sync frequencies > # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies > # VertRefresh is in Hz unless units are specified. > # VertRefresh may be a comma separated list of discrete values, or a > # comma separated list of ranges of values. > # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S > # USER MANUAL FOR THE CORRECT NUMBERS. > VertRefresh 40-150 > EndSection > > # ********************************************************************** > # Graphics device section > # ********************************************************************** > # Any number of graphics device sections may be present > # Standard VGA Device: > Section "Device" > Identifier "Standard VGA" > VendorName "Unknown" > BoardName "Unknown" > # The chipset line is optional in most cases. It can be used to override > # the driver's chipset detection, and should not normally be specified. > # Chipset "generic" > # The Driver line must be present. When using run-time loadable driver > # modules, this line instructs the server to load the specified driver > # module. Even when not using loadable driver modules, this line > # indicates which driver should interpret the information in this section. > Driver "vga" > # The BusID line is used to specify which of possibly multiple devices > # this section is intended for. When this line isn't present, a device > # section can only match up with the primary video device. For PCI > # devices a line like the following could be used. This line should not > # normally be included unless there is more than one video device > # intalled. > # BusID "PCI:0:10:0" > # VideoRam 256 > # Clocks 25.2 28.3 > EndSection > # Device configured by xf86config: > Section "Device" > Identifier "Video Card A" > Driver "chips" > #VideoRam 1024 > # Option "NoAccel" > # Option "use_18bit_bus" > # Option "hw_clocks" > # Textclockfreq 25.175 > # Option "nolinear" > # MemBase 0x03b00000 > # Device section for C&T cards. > # Option "suspend_hack" > # Option "STN" > # Option "no_stretch" > # Option "no_center" > # Option "use_modeline" > # Option "fix_panel_size" > # videoram 512 > # Insert Clocks lines here if appropriate > EndSection > > # ********************************************************************** > # Screen sections > # ********************************************************************** > # Any number of screen sections may be present. Each describes > # the configuration of a single screen. A single specific screen section > # may be specified from the X server command line with the "-screen" > # option. > Section "Screen" > Identifier "Screen 1" > Device "Video Card A" > Monitor "Monitor A" > DefaultDepth 4 > Subsection "Display" > Depth 4 > Modes "640x480" "800x600" > ViewPort 0 0 > Virtual 800 600 > EndSubsection > EndSection > # ********************************************************************** > # ServerLayout sections. > # ********************************************************************** > # Any number of ServerLayout sections may be present. Each describes > # the way multiple screens are organised. A specific ServerLayout > # section may be specified from the X server command line with the > # "-layout" option. In the absence of this, the first section is used. > # When now ServerLayout section is present, the first Screen section > # is used alone. > Section "ServerLayout" > # The Identifier line must be present > Identifier "Simple Layout" > # Each Screen line specifies a Screen section name, and optionally > # the relative position of other screens. The four names after > # primary screen name are the screens to the top, bottom, left and right > # of the primary screen. In this example, screen 2 is located to the > # right of screen 1. > Screen "Screen 1" > # Each InputDevice line specifies an InputDevice section name and > # optionally some options to specify the way the device is to be > # used. Those options include "CorePointer", "CoreKeyboard" and > # "SendCoreEvents". > InputDevice "Mouse1" "CorePointer" > InputDevice "Keyboard1" "CoreKeyboard" > EndSection > > Thanks in Advance for your time and efforts > > -scott > [EMAIL PROTECTED] > ----- Original Message ----- > From: "Cynthia Grossen" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, February 25, 2003 5:57 AM > Subject: RE: [XFree86] Fw: please help > > > > (EE) CHIPS(0): No Display subsection in Screen section "Screen 1" for > > depth/fbbpp 4/4 > > > > you need to modify your XF86config file. Add a section like: > > Section "Screen" > > Identifier "Screen0" > > Device "Card0" > > Monitor "Monitor0" > > DefaultDepth 16 > > SubSection "Display" > > Depth 1 > > EndSubSection > > SubSection "Display" > > Depth 4 > > EndSubSection > > SubSection "Display" > > Depth 8 > > EndSubSection > > SubSection "Display" > > Depth 15 > > EndSubSection > > SubSection "Display" > > Depth 16 > > Modes "1024x768" "800x600" "640x480" > > # "1280x1024" "1600x1200" "1920x1440" > > EndSubSection > > SubSection "Display" > > Depth 24 > > EndSubSection > > EndSection > > _______________________________________________ > > XFree86 mailing list > > [EMAIL PROTECTED] > > http://XFree86.Org/mailman/listinfo/xfree86 > > > > > sh: octet-filter: command not found > sh: octet-filter: command not found -- David Bateman [EMAIL PROTECTED] Motorola CRM +33 1 69 35 25 00 (Ph) Espace Technologique, Commune de St Aubin +33 1 69 35 25 01 (Fax) 91193 Gif-Sur-Yvette FRANCE The information contained in this communication has been classified as: [ ] General Business Information [ ] Motorola Internal Use Only [ ] Motorola Confidential Proprietary _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
