There was some discussion of this between Marc and Hui just before 4.3.0 was released. I believe the problem had something to do with int10 and the BIOS on radeons when soft booting them. I think the true resolution was put off until after 4.3.0 was released. I'm not sure what the current status is of that fix. perhaps they can comment on it.
Another thing you might try is putting the pci card in another slot or changing the display init value in the bios from AGP to PCI or vice versa. Alex ----------------------------------- I have been attempting to use two monitors with two ATI 7000 video cards. 1 AGP and 1 PCI. The hardware works with Windows XP. I can successfully use one or the other monitor/card but when I try to use both the x server crashes immediately. My XFree86Config file works until I add a line like the following to the ServerLayout Section Screen "Screen 1" Rightof "Screen 2". I have included a copy of my XFree86Config file and the log file below. I have read everything I can find on the internet with google pertaining to this problem but can't solve this problem. I am beginning to wonder if it is possible to do this. I could admit defeat and replace the AGP card with a dual head card but I don't like to give up. Thanks in advance for any help or suggestions. Don __________________________________ Do you Yahoo!? Yahoo! Calendar - Free online calendar with sync to Outlook(TM). http://calendar.yahoo.com _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
