I just installed a Matrox G450 with RH9 and couldn't get it to work correctly until I updated the bios. There is a bios update for the G400 (and others) dated jan. 16 2003 at www.matrox.com/mga/support/drivers/bios.
----- Original Message ----- From: "Ryan Underwood" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, June 07, 2003 9:54 PM Subject: [XFree86] mga on 4.3.0? > Hi, > > Is anyone having success using a MGA G400 with DRI on 4.3.0? Ever since > I upgraded to the preliminary 4.3.0 debian packages from a working 4.2.1 > installation, texturing simply is not working. Simple poly programs > like glxgears run fine and are fast, but running something like quake > produces the correct poly output, but the textures are all corrupt and I > get errors in the console about texture uploads failing. > > Any ideas or input would be appreciated. I'm also still trying to track > down a hard machine hang that occurs randomly upon exiting a SDL 3D > program with the G400 driver, but I can't really get much further > debugging that until I figure out what the texturing problem is. > > Thanks, > > -- > Ryan Underwood, <nemesis at icequake.net>, icq=10317253 > _______________________________________________ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 > > _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
