Andrew, you are using two different version of XFree86. The working configuration was from Version 4.2.1 the other one was Version 4.2.1.1 (Debian 4.2.1-6 20030225230350 [EMAIL PROTECTED]) (whatever that is). On the second one VBE isn't initialized when the driver tries to read the VESA BIOS modes. Therefore that fails. It looks like you have a bogus version of the savage driver. However you've specified these monitor lines in your XF86Config:
(II) SAVAGE(0): LCD: Using hsync range of 25.00-1000.00 kHz (II) SAVAGE(0): LCD: Using vrefresh range of 25.00-1000.00 Hz If you limit the upper frequencies to 70Hz/80kHz you may have a chance to get a working mode without adding a modeline or reading the BIOS. Egbert. Andrew Pimlott writes: > I just had a weird experience which resulted in a garbled screen > when I started X. My laptop had a flaky power connection, and I > suddenly lost power while in X, causing a reboot. When I started X > again, I got garbage[1]. I booted Windows, and the screen came up > fine--but it rebooted after showing the login screen. Assuming the > power problem had fried something, I took the machine for repairs. > > The shop said they replaced the system board. Windows now ran fine, > but X still showed garbage. Fortunately, I had started X on screen > 1 not long ago, so I had a working XFree86.1.log for comparison > (though not for the exact same version of XFree86). The big > difference seems to be the line > > (EE) SAVAGE(0): Failed to fetch any BIOS modes. Disabling BIOS. > > in the newer log file, where the old had > > (--) SAVAGE(0): Found 12 modes at this depth: > [10e] 320 x 200, 70Hz > ... > [178] 720 x 576, 75Hz > > Apparently as a result, I now get modeline > > (**) SAVAGE(0): Default mode "1024x768": 194.0 MHz, 137.0 kHz, 85.0 Hz (D) > (II) SAVAGE(0): Modeline "1024x768" 194.02 1024 1108 1220 1416 768 768 770 > 806 doublescan -hsync +vsync > > instead of > > (**) SAVAGE(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz > (II) SAVAGE(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 > 808 +hsync +vsync > > If I manually enter the old modeline in my XF86Config-4, X now > works. Phew! > > So what could have happened to my BIOS? I think that in a laptop, > it should be on the system board, so it should have been replaced. > Where else could it be? More importantly, do you have any idea how > why X can't read it, and how I can fix it? Might it cause any other > problems? > > Also, I'm a little fuzzy as to why X accepted the bad modeline. > There are two lines in the log that seem to refer to dot clocks: > > (--) SAVAGE(0): Detected current MCLK value of 100.227 MHz > ... > (II) SAVAGE(0): Clock range: 10.00 to 250.00 MHz > > Where did the 250 MHz come from? I'm not up on recent video > hardware, but isn't that faster than most cards can handle? What > happened to the (presumably correct) 100 MHz value? > > I attach XFree86.log.old (working), XFree86.log.new (broken), and > XF86Config-4. My X is > > XFree86 Version 4.2.1.1 (Debian 4.2.1-6 20030225230350 [EMAIL PROTECTED]) / X > Window System > > Thanks for any help, > Andrew > > PS. Please Cc: me in replies. > > [1] Usually, a very bright screen--in which I could fainly discern > the burned in image of two xterms that I normally have > open--followed by noise with a pattern, not resembling what should > have appeared. > > This is a pre-release version of XFree86, and is not supported in any > way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted > to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, > please check the latest version in the XFree86 CVS repository > (http://www.XFree86.Org/cvs) > > XFree86 Version 4.2.1.1 (Debian 4.2.1-6 20030225230350 [EMAIL PROTECTED]) / X > Window System > (protocol Version 11, revision 0, vendor release 6600) > Release Date: 18 October 2002 > If the server is older than 6-12 months, or if your card is > newer than the above date, look for a newer version before > reporting problems. (See http://www.XFree86.Org/) > Build Operating System: Linux 2.4.20-586tsc i686 [ELF] > Module Loader present > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/XFree86.0.log", Time: Fri Jun 6 13:01:21 2003 > (==) Using config file: "/etc/X11/XF86Config-4" > (==) ServerLayout "Default Layout" > (**) |-->Screen "Default Screen" (0) > (**) | |-->Monitor "LCD" > (**) | |-->Device "S3 Savage/MX" > (**) |-->Input Device "Generic Keyboard" > (**) Option "XkbRules" "xfree86" > (**) XKB: rules: "xfree86" > (**) Option "XkbModel" "pc104" > (**) XKB: model: "pc104" > (**) Option "XkbLayout" "us" > (**) XKB: layout: "us" > (==) Keyboard: CustomKeycode disabled > (**) |-->Input Device "Configured Mouse" > (WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist. > Entry deleted from font path. > (**) FontPath set to > "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi" > (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (==) ModulePath set to "/usr/X11R6/lib/modules" > (--) using VT number 7 > > (II) Open APM successful > (II) Module ABI versions: > XFree86 ANSI C Emulation: 0.1 > XFree86 Video Driver: 0.5 > XFree86 XInput driver : 0.3 > XFree86 Server Extension : 0.1 > XFree86 Font Renderer : 0.3 > (II) Loader running on linux > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.2.1.1, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.3 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.2.1.1, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 8086,7190 card 1179,0001 rev 03 class 06,00,00 hdr 00 > (II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01 > (II) PCI: 00:05:0: chip 8086,7110 card 0000,0000 rev 02 class 06,80,00 hdr 80 > (II) PCI: 00:05:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00 > (II) PCI: 00:05:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00 > (II) PCI: 00:05:3: chip 8086,7113 card 0000,0000 rev 03 class 06,80,00 hdr 00 > (II) PCI: 00:07:0: chip 11c1,0441 card 1179,0001 rev 01 class 07,80,00 hdr 00 > (II) PCI: 00:09:0: chip 1179,0d01 card 1179,0001 rev 00 class 0d,00,00 hdr 00 > (II) PCI: 00:0b:0: chip 1179,0617 card 0000,0000 rev 20 class 06,07,00 hdr 82 > (II) PCI: 00:0b:1: chip 1179,0617 card 0000,0000 rev 20 class 06,07,00 hdr 82 > (II) PCI: 00:0c:0: chip 1073,0010 card 1179,0001 rev 02 class 04,01,00 hdr 00 > (II) PCI: 01:00:0: chip 5333,8c10 card 1179,0001 rev 11 class 03,00,00 hdr 00 > (II) PCI: End of PCI scan > (II) LoadModule: "scanpci" > (II) Loading /usr/X11R6/lib/modules/libscanpci.a > (II) Module scanpci: vendor="The XFree86 Project" > compiled for 4.2.1.1, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) UnloadModule: "scanpci" > (II) Unloading /usr/X11R6/lib/modules/libscanpci.a > (II) Host-to-PCI bridge: > (II) PCI-to-PCI bridge: > (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) > (II) Bus 0 I/O range: > [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) Bus 0 non-prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 0 prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x88 (VGA_EN is set) > (II) Bus 1 I/O range: > (II) Bus 1 non-prefetchable memory range: > [0] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B] > (II) Bus 1 prefetchable memory range: > (--) PCI:*(1:0:0) S3 Savage/MX-MV rev 17, Mem @ 0xf0000000/27, BIOS @ 0x000c0000/16 > (II) Addressable bus resource ranges are > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) OS-reported resource ranges: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) Active PCI resource ranges: > [0] -1 0 0xefff8000 - 0xefffffff (0x8000) MX[B] > [1] -1 0 0xffefff00 - 0xffefffff (0x100) MX[B] > [2] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B] > [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) > [4] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) > [5] -1 0 0x0000fefc - 0x0000feff (0x4) IX[B] > [6] -1 0 0x0000ff00 - 0x0000ff3f (0x40) IX[B] > [7] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] > [8] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] > [9] -1 0 0x000002f8 - 0x000002ff (0x8) IX[B] > [10] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] > [11] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B] > (II) Active PCI resource ranges after removing overlaps: > [0] -1 0 0xefff8000 - 0xefffffff (0x8000) MX[B] > [1] -1 0 0xffefff00 - 0xffefffff (0x100) MX[B] > [2] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B] > [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) > [4] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) > [5] -1 0 0x0000fefc - 0x0000feff (0x4) IX[B] > [6] -1 0 0x0000ff00 - 0x0000ff3f (0x40) IX[B] > [7] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] > [8] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] > [9] -1 0 0x000002f8 - 0x000002ff (0x8) IX[B] > [10] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] > [11] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B] > (II) OS-reported resource ranges after removing overlaps with PCI: > [0] -1 0 0xffe00000 - 0xffdfffff (0x0) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) All system resource ranges: > [0] -1 0 0xffe00000 - 0xffdfffff (0x0) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xefff8000 - 0xefffffff (0x8000) MX[B] > [6] -1 0 0xffefff00 - 0xffefffff (0x100) MX[B] > [7] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B] > [8] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) > [9] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) > [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [12] -1 0 0x0000fefc - 0x0000feff (0x4) IX[B] > [13] -1 0 0x0000ff00 - 0x0000ff3f (0x40) IX[B] > [14] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] > [15] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] > [16] -1 0 0x000002f8 - 0x000002ff (0x8) IX[B] > [17] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] > [18] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B] > (II) LoadModule: "ddc" > (II) Loading /usr/X11R6/lib/modules/libddc.a > (II) Module ddc: vendor="The XFree86 Project" > compiled for 4.2.1.1, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) LoadModule: "GLcore" > (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a > Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:debug_xform.o": No symbols > found > (II) Module GLcore: vendor="The XFree86 Project" > compiled for 4.2.1.1, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.1 > (II) LoadModule: "dbe" > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a > (II) Module dbe: vendor="The XFree86 Project" > compiled for 4.2.1.1, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "dri" > (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a > (II) Module dri: vendor="The XFree86 Project" > compiled for 4.2.1.1, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading sub module "drm" > (II) LoadModule: "drm" > (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a > (II) Module drm: vendor="The XFree86 Project" > compiled for 4.2.1.1, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension XFree86-DRI > (II) LoadModule: "extmod" > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a > (II) Module extmod: vendor="The XFree86 Project" > compiled for 4.2.1.1, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension SHAPE > (II) Loading extension MIT-SUNDRY-NONSTANDARD > (II) Loading extension BIG-REQUESTS > (II) Loading extension SYNC > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XC-MISC > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-Misc > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension FontCache > (II) Loading extension TOG-CUP > (II) Loading extension Extended-Visual-Information > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) LoadModule: "glx" > (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a > (II) Module glx: vendor="The XFree86 Project" > compiled for 4.2.1.1, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading sub module "GLcore" > (II) LoadModule: "GLcore" > (II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a > (II) Loading extension GLX > (II) LoadModule: "pex5" > (WW) Warning, couldn't open module pex5 > (II) UnloadModule: "pex5" > (EE) Failed to load module "pex5" (module does not exist, 0) > (II) LoadModule: "record" > (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a > (II) Module record: vendor="The XFree86 Project" > compiled for 4.2.1.1, module version = 1.13.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension RECORD > (II) LoadModule: "xie" > (WW) Warning, couldn't open module xie > (II) UnloadModule: "xie" > (EE) Failed to load module "xie" (module does not exist, 0) > (II) LoadModule: "bitmap" > (II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Loading font Bitmap > (II) LoadModule: "freetype" > (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a > (II) Module freetype: vendor="The XFree86 Project" > compiled for 4.2.1.1, module version = 1.1.10 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.3 > (II) Loading font FreeType > (II) LoadModule: "speedo" > (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a > Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found > (II) Module speedo: vendor="The XFree86 Project" > compiled for 4.2.1.1, module version = 1.0.1 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.3 > (II) Loading font Speedo > (II) LoadModule: "type1" > (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a > (II) Module type1: vendor="The XFree86 Project" > compiled for 4.2.1.1, module version = 1.0.1 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.3 > (II) Loading font Type1 > (II) Loading font CID > (II) LoadModule: "vbe" > (II) Loading /usr/X11R6/lib/modules/libvbe.a > (II) Module vbe: vendor="The XFree86 Project" > compiled for 4.2.1.1, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) LoadModule: "int10" > (II) Loading /usr/X11R6/lib/modules/linux/libint10.a > (II) Module int10: vendor="The XFree86 Project" > compiled for 4.2.1.1, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) LoadModule: "savage" > (II) Loading /usr/X11R6/lib/modules/drivers/savage_drv.o > (II) Module savage: vendor="The XFree86 Project" > compiled for 4.2.1.1, module version = 1.1.26 > Module class: XFree86 Video Driver > ABI class: XFree86 Video Driver, version 0.5 > (II) LoadModule: "mouse" > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o > (II) Module mouse: vendor="The XFree86 Project" > compiled for 4.2.1.1, module version = 1.0.0 > Module class: XFree86 XInput Driver > ABI class: XFree86 XInput driver, version 0.3 > (II) SAVAGE: driver (version 1.1.26) for S3 Savage chipsets: Savage4, > Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX, > Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133, > ProSavage PN133, ProSavage KN133, SuperSavage/MX 128, > SuperSavage/MX 64, SuperSavage/MX 64C, SuperSavage/IX 128, > SuperSavage/IX 128, SuperSavage/IX 64, SuperSavage/IX 64, > SuperSavage/IXC 64, SuperSavage/IXC 64, ProSavage DDR, > ProSavage DDR-K > (II) Primary Device is: PCI 01:00:0 > (--) Assigning device section with no busID to primary device > (--) Chipset MobileSavage found > (II) resource ranges after xf86ClaimFixedResources() call: > [0] -1 0 0xffe00000 - 0xffdfffff (0x0) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xefff8000 - 0xefffffff (0x8000) MX[B] > [6] -1 0 0xffefff00 - 0xffefffff (0x100) MX[B] > [7] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B] > [8] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) > [9] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) > [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [12] -1 0 0x0000fefc - 0x0000feff (0x4) IX[B] > [13] -1 0 0x0000ff00 - 0x0000ff3f (0x40) IX[B] > [14] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] > [15] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] > [16] -1 0 0x000002f8 - 0x000002ff (0x8) IX[B] > [17] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] > [18] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B] > (II) resource ranges after probing: > [0] -1 0 0xffe00000 - 0xffdfffff (0x0) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xefff8000 - 0xefffffff (0x8000) MX[B] > [6] -1 0 0xffefff00 - 0xffefffff (0x100) MX[B] > [7] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B] > [8] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) > [9] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) > [10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [15] -1 0 0x0000fefc - 0x0000feff (0x4) IX[B] > [16] -1 0 0x0000ff00 - 0x0000ff3f (0x40) IX[B] > [17] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] > [18] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] > [19] -1 0 0x000002f8 - 0x000002ff (0x8) IX[B] > [20] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] > [21] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B] > [22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [23] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) Setting vga for screen 0. > (II) Loading sub module "vgahw" > (II) LoadModule: "vgahw" > (II) Loading /usr/X11R6/lib/modules/libvgahw.a > (II) Module vgahw: vendor="The XFree86 Project" > compiled for 4.2.1.1, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (**) SAVAGE(0): Depth 16, (--) framebuffer bpp 16 > (==) SAVAGE(0): RGB weight 565 > (==) SAVAGE(0): Default visual is TrueColor > (II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 > (==) SAVAGE(0): Using HW cursor > (==) SAVAGE(0): Using video BIOS to set modes > (II) Loading sub module "int10" > (II) LoadModule: "int10" > (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a > (II) SAVAGE(0): Primary V_BIOS segment is: 0xc000 > (II) Loading sub module "vbe" > (II) LoadModule: "vbe" > (II) Reloading /usr/X11R6/lib/modules/libvbe.a > (--) SAVAGE(0): Chip: id 8c10, "Savage/MX-MV" > (--) SAVAGE(0): Engine: "MobileSavage" > (--) SAVAGE(0): mapping MMIO @ 0xf1000000 with size 0x80000 > (==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0) > (--) SAVAGE(0): probed videoram: 8192k > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Reloading /usr/X11R6/lib/modules/libddc.a > (--) SAVAGE(0): No DDC signal > (II) Loading sub module "i2c" > (II) LoadModule: "i2c" > (II) Loading /usr/X11R6/lib/modules/libi2c.a > (II) Module i2c: vendor="The XFree86 Project" > compiled for 4.2.1.1, module version = 1.2.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) SAVAGE(0): I2C bus "I2C bus" initialized. > (II) SAVAGE(0): I2C device "I2C bus:ddc2" registered. > (II) SAVAGE(0): I2C device "I2C bus:ddc2" removed. > (--) SAVAGE(0): Detected current MCLK value of 100.227 MHz > (--) SAVAGE(0): 1024x768 TFT LCD panel detected and active > (--) SAVAGE(0): - Limiting video mode to 1024x768 > (II) SAVAGE(0): LCD: Using hsync range of 25.00-1000.00 kHz > (II) SAVAGE(0): LCD: Using vrefresh range of 25.00-1000.00 Hz > (II) SAVAGE(0): Clock range: 10.00 to 250.00 MHz > (II) SAVAGE(0): Not using default mode "1152x864" (exceeds panel dimensions) > (II) SAVAGE(0): Not using default mode "1280x960" (exceeds panel dimensions) > (II) SAVAGE(0): Not using default mode "1280x960" (exceeds panel dimensions) > (II) SAVAGE(0): Not using default mode "1280x1024" (exceeds panel dimensions) > (II) SAVAGE(0): Not using default mode "1280x1024" (exceeds panel dimensions) > (II) SAVAGE(0): Not using default mode "1280x1024" (exceeds panel dimensions) > (II) SAVAGE(0): Not using default mode "1600x1200" (exceeds panel dimensions) > (II) SAVAGE(0): Not using default mode "1600x1200" (exceeds panel dimensions) > (II) SAVAGE(0): Not using default mode "1600x1200" (exceeds panel dimensions) > (II) SAVAGE(0): Not using default mode "1600x1200" (exceeds panel dimensions) > (II) SAVAGE(0): Not using default mode "1600x1200" (exceeds panel dimensions) > (II) SAVAGE(0): Not using default mode "1792x1344" (exceeds panel dimensions) > (II) SAVAGE(0): Not using default mode "1792x1344" (bad mode > clock/interlace/doublescan) > (II) SAVAGE(0): Not using default mode "1856x1392" (exceeds panel dimensions) > (II) SAVAGE(0): Not using default mode "1856x1392" (bad mode > clock/interlace/doublescan) > (II) SAVAGE(0): Not using default mode "1920x1440" (exceeds panel dimensions) > (II) SAVAGE(0): Not using default mode "1920x1440" (bad mode > clock/interlace/doublescan) > (II) SAVAGE(0): Not using default mode "1152x768" (exceeds panel dimensions) > (II) SAVAGE(0): Not using default mode "1400x1050" (exceeds panel dimensions) > (II) SAVAGE(0): Not using default mode "1400x1050" (exceeds panel dimensions) > (II) SAVAGE(0): Not using default mode "1600x1024" (exceeds panel dimensions) > (II) SAVAGE(0): Not using default mode "1920x1440" (bad mode > clock/interlace/doublescan) > (II) SAVAGE(0): Not using default mode "2048x1536" (bad mode > clock/interlace/doublescan) > (II) SAVAGE(0): Not using default mode "2048x1536" (bad mode > clock/interlace/doublescan) > (II) SAVAGE(0): Not using default mode "2048x1536" (bad mode > clock/interlace/doublescan) > (EE) SAVAGE(0): Failed to fetch any BIOS modes. Disabling BIOS. > (--) SAVAGE(0): Virtual size is 1024x768 (pitch 1024) > (**) SAVAGE(0): Default mode "1024x768": 194.0 MHz, 137.0 kHz, 85.0 Hz (D) > (II) SAVAGE(0): Modeline "1024x768" 194.02 1024 1108 1220 1416 768 768 770 806 > doublescan -hsync +vsync > (++) SAVAGE(0): DPI set to (100, 100) > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Loading /usr/X11R6/lib/modules/libfb.a > (II) Module fb: vendor="The XFree86 Project" > compiled for 4.2.1.1, module version = 1.0.0 > ABI class: XFree86 ANSI C Emulation, version 0.1 > (II) Loading sub module "xaa" > (II) LoadModule: "xaa" > (II) Loading /usr/X11R6/lib/modules/libxaa.a > (II) Module xaa: vendor="The XFree86 Project" > compiled for 4.2.1.1, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) Loading sub module "ramdac" > (II) LoadModule: "ramdac" > (II) Loading /usr/X11R6/lib/modules/libramdac.a > (II) Module ramdac: vendor="The XFree86 Project" > compiled for 4.2.1.1, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) do I need RAC? No, I don't. > (II) resource ranges after preInit: > [0] 0 0 0xf0000000 - 0xf7ffffff (0x8000000) MS[B] > [1] -1 0 0xffe00000 - 0xffdfffff (0x0) MX[B](B) > [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [4] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B] > [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [6] -1 0 0xefff8000 - 0xefffffff (0x8000) MX[B] > [7] -1 0 0xffefff00 - 0xffefffff (0x100) MX[B] > [8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B] > [9] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) > [10] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) > [11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) > [12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) > [13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) > [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [16] -1 0 0x0000fefc - 0x0000feff (0x4) IX[B] > [17] -1 0 0x0000ff00 - 0x0000ff3f (0x40) IX[B] > [18] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] > [19] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] > [20] -1 0 0x000002f8 - 0x000002ff (0x8) IX[B] > [21] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] > [22] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B] > [23] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) > [24] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) > (II) SAVAGE(0): VESA BIOS detected > (II) SAVAGE(0): VESA VBE Version 2.0 > (II) SAVAGE(0): VESA VBE Total Mem: 8192 kB > (II) SAVAGE(0): VESA VBE OEM: S3 Incorporated. M7 BIOS > (II) SAVAGE(0): VESA VBE OEM Software Rev: 1.0 > (II) SAVAGE(0): VESA VBE OEM Vendor: S3 Incorporated. > (II) SAVAGE(0): VESA VBE OEM Product: VBE 2.0 > (II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 1.1 > (--) SAVAGE(0): mapping framebuffer @ 0xf0000000 with size 0x800000 > (==) SAVAGE(0): Write-combining range (0xf0000000,0x800000) > (II) SAVAGE(0): Using 1279 lines for offscreen memory. > (II) SAVAGE(0): Using XFree86 Acceleration Architecture (XAA) > Screen to screen bit blits > Solid filled rectangles > 8x8 mono pattern filled rectangles > Indirect CPU to Screen color expansion > Solid Lines > Image Writes > Offscreen Pixmaps > Setting up tile and stipple cache: > 32 128x128 slots > 10 256x256 slots > (==) SAVAGE(0): Backing store disabled > (**) Option "dpms" > (**) SAVAGE(0): DPMS enabled > (II) Initializing built-in extension MIT-SHM > (II) Initializing built-in extension XInputExtension > (II) Initializing built-in extension XTEST > (II) Initializing built-in extension XKEYBOARD > (II) Initializing built-in extension LBX > (II) Initializing built-in extension XC-APPGROUP > (II) Initializing built-in extension SECURITY > (II) Initializing built-in extension XINERAMA > (II) Initializing built-in extension XFree86-Bigfont > (II) Initializing built-in extension RENDER > (II) Keyboard "Generic Keyboard" handled by legacy driver > (**) Option "Protocol" "IntelliMouse" > (**) Configured Mouse: Protocol: "IntelliMouse" > (**) Option "CorePointer" > (**) Configured Mouse: Core Pointer > (**) Option "Device" "/dev/gpmdata" > (**) Option "Emulate3Buttons" "true" > (**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50 > (**) Option "ZAxisMapping" "4 5" > (**) Configured Mouse: ZAxisMapping: buttons 4 and 5 > (**) Configured Mouse: Buttons: 5 > (**) Option "BaudRate" "1200" > (**) Configured Mouse: BaudRate: 1200 > (II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE) > Could not init font path element unix/:7100, removing from list! > (II) PM Event received: Power Status Change > # XF86Config-4 (XFree86 server configuration file) generated by Dexconf, the > # Debian X Configuration tool, using values from the debconf database. > # > # Edit this file with caution, and see the XF86Config manual page. > # (Type "man XF86Config" at the shell prompt.) > > Section "Files" > FontPath "unix/:7100" # local font server > # if the local font server has problems, we can fall back on these > FontPath "/usr/lib/X11/fonts/misc" > FontPath "/usr/lib/X11/fonts/cyrillic" > FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" > FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" > FontPath "/usr/lib/X11/fonts/Type1" > FontPath "/usr/lib/X11/fonts/Speedo" > FontPath "/usr/lib/X11/fonts/100dpi" > FontPath "/usr/lib/X11/fonts/75dpi" > EndSection > > Section "ServerFlags" > EndSection > > Section "Module" > Load "ddc" > Load "GLcore" > Load "dbe" > Load "dri" > Load "extmod" > Load "glx" > Load "pex5" > Load "record" > Load "xie" > Load "bitmap" > Load "freetype" > Load "speedo" > Load "type1" > Load "vbe" > Load "int10" > EndSection > > Section "InputDevice" > Identifier "Generic Keyboard" > Driver "keyboard" > Option "CoreKeyboard" > Option "XkbRules" "xfree86" > Option "XkbModel" "pc104" > Option "XkbLayout" "us" > EndSection > > Section "InputDevice" > Identifier "Configured Mouse" > Driver "mouse" > Option "CorePointer" > Option "Device" "/dev/gpmdata" > Option "Protocol" "IntelliMouse" > Option "Emulate3Buttons" "true" > Option "ZAxisMapping" "4 5" > EndSection > > Section "Device" > Identifier "S3 Savage/MX" > Driver "savage" > EndSection > > Section "Monitor" > Identifier "LCD" > HorizSync 25-1000 > VertRefresh 25-1000 > Option "DPMS" > EndSection > > Section "Screen" > Identifier "Default Screen" > Device "S3 Savage/MX" > Monitor "LCD" > DefaultDepth 16 > SubSection "Display" > Depth 16 > Modes "1024x768" > EndSubSection > EndSection > > Section "ServerLayout" > Identifier "Default Layout" > Screen "Default Screen" > InputDevice "Generic Keyboard" > InputDevice "Configured Mouse" > EndSection > > Section "DRI" > Mode 0666 > EndSection > > # end of XF86Config _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
