Hi there,
My name is Cristian Campeanu and I'm from Romania.
I own a Likom L - 403 monitor which a broke 3 times already by changing
resolution (the usual Ctrl+Alt+-) and a S3 Trio3D. I'm running RedHat Linux
7.2 with the 2.4.7-10 kernel and XFree 4.1.0 with the compatibility modules
for 3.3.6.
Under XF86_SVGA I had no problems but trying XFree86 to get (some)
acceleration it all works fine until I try to change resolution. Then 3
transistors die: the final transistor, the line driver and one FET in the
source (I hope I translated this well enough for an electronics specialist to
understand). I'm guessing it's something about timings. Probably the svga
driver waits a while before applying the new settings and the s3virge driver
doesn't.
I only have one question: is it my monitor or is it software?
I'm attatching my config files and the logfile (I use a script to get messages
from 3.3.6).
Thank you for existing.
# File generated by XConfigurator.
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:7100"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Keyboard section
# **********************************************************************
Section "Keyboard"
Protocol "Standard"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
#Protocol "Xqueue"
AutoRepeat 500 5
# Let the server do the NumLock processing. This should only be
# required when using pre-R6 clients
#ServerNumLock
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#Xleds 1 2 3
#To set the LeftAlt to Meta, RightAlt key to ModeShift,
#RightCtl key to Compose, and ScrollLock key to ModeLock:
LeftAlt Meta
RightAlt Meta
ScrollLock Compose
RightCtl Control
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# XkbDisable
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# XkbModel "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# XkbModel "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# XkbLayout "de"
# or:
# XkbLayout "de"
# XkbVariant "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# XkbOptions "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# XkbRules "xfree86"
# XkbModel "pc101"
# XkbLayout "us"
# XkbVariant ""
# XkbOptions ""
XkbKeycodes "xfree86"
XkbTypes "default"
XkbCompat "default"
XkbSymbols "us(pc101)"
XkbGeometry "pc"
XkbRules "xfree86"
XkbModel "pc101"
XkbLayout "us"
EndSection
# **********************************************************************
# Pointer section
# **********************************************************************
Section "Pointer"
Protocol "IntelliMouse"
Device "/dev/mouse"
ZAxisMapping 4 5
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Protocol "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice
# BaudRate 9600
# SampleRate 150
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Emulate3Buttons
# Emulate3Timeout 50
# ChordMiddle is an option for some 3-button Logitech mice
# ChordMiddle
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "CustomConfiguration"
VendorName "Unknown"
ModelName "Unknown"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-50
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 47-110
# Modes can be specified in two formats. A compact one-line format, or
# a multi-line format.
# These two are equivalent
# ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace
# Mode "1024x768i"
# DotClock 45
# HTimings 1024 1048 1208 1264
# VTimings 768 776 784 817
# Flags "Interlace"
# EndMode
# This is a set of standard mode timings. Modes that are out of monitor spec
# are automatically deleted by the server (provided the HorizSync and
# VertRefresh lines are correct), so there's no immediate need to
# delete mode timings (unless particular mode timings don't work on your
# monitor). With these modes, the best standard mode that your monitor
# and video card can support for a given resolution is automatically
# used.
# 512x384 @ 78 Hz, 31.50 kHz hsync
#Modeline "512x384" 20.160 512 528 592 640 384 385 388 404 -HSync -VSync
# 512x384 @ 85 Hz, 34.38 kHz hsync
#Modeline "512x384" 22 512 528 592 640 384 385 388 404 -HSync -VSync
# 640x400 @ 70 Hz, 31.5 kHz hsync
#Modeline "640x400" 25.175 640 664 760 800 400 409 411 450
# 640x400 @ 85 Hz, 37.86 kHz hsync
#Modeline "640x400" 31.5 640 672 736 832 400 401 404 445 -HSync +VSync
# 640x480 @ 100 Hz, 53.01 kHz hsync
#Modeline "640x480" 45.8 640 672 768 864 480 488 494 530 -HSync -VSync
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525
# 640x480 @ 72 Hz, 36.5 kHz hsync
#Modeline "640x480" 31.5 640 680 720 864 480 488 491 521
# 640x480 @ 75 Hz, 37.50 kHz hsync
#ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -HSync -VSync
# 640x480 @ 85 Hz, 43.27 kHz hsync
#Modeline "640x480" 36 640 696 752 832 480 481 484 509 -HSync -VSync
# 800x600 @ 100 Hz, 64.02 kHz hsync
#Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync
# 800x600 @ 56 Hz, 35.15 kHz hsync
#ModeLine "800x600" 36 800 824 896 1024 600 601 603 625
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72 Hz, 48.0 kHz hsync
#Modeline "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 85 Hz, 55.84 kHz hsync
#Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync
# 1024x480 for certain Vaios
#Modeline "1024x480" 65 1024 1032 1176 1344 480 491 493 525 -HSync -VSync
# 1024x768 @ 100Hz, 80.21 kHz hsync
#Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70 Hz, 56.5 kHz hsync
#Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 76 Hz, 62.5 kHz hsync
#Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823
# 1024x768 @ 85 Hz, 70.24 kHz hsync
#Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync
# 1152x864 @ 100 Hz, 89.62 kHz hsync
#Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync
# 1152x864 @ 60 Hz, 53.5 kHz hsync
#Modeline "1152x864" 89.9 1152 1216 1472 1680 864 868 876 892 -HSync -VSync
# 1152x864 @ 70 Hz, 62.4 kHz hsync
#Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895
# 1152x864 @ 78 Hz, 70.8 kHz hsync
#Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908
# 1152x864 @ 84 Hz, 76.0 kHz hsync
#Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908
# 1280x960 @ 60 HzModeline "1280x960" 108 1280 1376 1488 1800 960 961 964 1000
+HSync +VSync
# 1280x960 @ 85 HzModeline "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011
+HSync +VSync
# 1280x1024 @ 100 Hz, 107.16 kHz hsync
#Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
#Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054
# 1280x1024 @ 70 Hz, 74.59 kHz hsync
#Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync
# 1280x1024 @ 74 Hz, 78.85 kHz hsync
#Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064
# 1280x1024 @ 76 Hz, 81.13 kHz hsync
#Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
# 1280x1024 @ 85 Hz, 91.15 kHz hsync
#Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync
# 1400x1050 @ 60Hz, 65.8 kHz hsync
#Modeline "1400x1050" 129 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 70Hz, 76.8 kHz hsync
#Modeline "1400x1050" 151 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 75Hz, 82.3 kHz hsync
#Modeline "1400x1050" 162 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 85Hz, 93.2 kHz hsync
#Modeline "1400x1050" 184 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync
# 1600x1200 @ 60Hz, 75.00 kHz hsync
#Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
# 1600x1200 @ 70 Hz, 87.50 kHz hsync
#Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync
# 1600x1200 @ 75 Hz, 93.75 kHz hsync
#Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
# 1600x1200 @ 85 Hz, 105.77 kHz hsync
#Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync
# 1800x1440 @ 64Hz, 96.15 kHz hsync
#ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# 1800x1440 @ 70Hz, 104.52 kHz hsync
#ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Low-res Doublescan modes
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.
# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
#Modeline "320x200" 12.588 320 336 384 400 200 204 205 225 Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
#Modeline "320x240" 12.588 320 336 384 400 240 245 246 262 Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
#Modeline "320x240" 15.750 320 336 384 400 240 244 246 262 Doublescan
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
#ModeLine "400x300" 18 400 416 448 512 300 301 302 312 Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
#Modeline "400x300" 20 400 416 480 528 300 301 303 314 Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
#Modeline "400x300" 25 400 424 488 520 300 319 322 333 Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
#ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312 Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
#Modeline "480x300" 23.890 480 496 576 632 300 301 303 314 Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
#Modeline "480x300" 25 480 496 576 632 300 301 303 314 Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
#Modeline "480x300" 29.952 480 504 584 624 300 319 322 333 Doublescan
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
Section "Device"
Identifier "Generic VGA"
VendorName "Unknown"
BoardName "Unknown"
Chipset "generic"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by Xconfigurator:
Section "Device"
Identifier "S3 Trio3D"
# VendorName "Unknown"
# BoardName "Unknown"
VideoRam 4096
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# The Colour SVGA server
Section "Screen"
Driver "svga"
Device "S3 Trio3D"
Monitor "CustomConfiguration"
DefaultColorDepth 16
Subsection "Display"
Depth 16
# Omit the Modes line for the "Generic VGA" device
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
# Subsection "Display"
# Depth 24
# Modes "1024x768" "800x600" "640x480"
# ViewPort 0 0
# EndSubsection
EndSection
# The 16-color VGA server
Section "Screen"
Driver "vga16"
Device "Generic VGA"
Monitor "CustomConfiguration"
Subsection "Display"
Modes "640x480" "800x600"
ViewPort 0 0
EndSubsection
EndSection
# The Mono server
Section "Screen"
Driver "vga2"
Device "Generic VGA"
Monitor "CustomConfiguration"
Subsection "Display"
Modes "640x480" "800x600"
ViewPort 0 0
EndSubsection
EndSection
# The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32, Mach64
# I128, and S3V)
Section "Screen"
Driver "accel"
Device "S3 Trio3D"
Monitor "CustomConfiguration"
DefaultColorDepth 16
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
# Subsection "Display"
# Depth 24
# Modes "1024x768" "800x600" "640x480"
# ViewPort 0 0
# EndSubsection
EndSection
# XFree86 4.0 configuration generated by Xconfigurator
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
# By default, Red Hat Linux 6.0 and later use xfs
Section "Files"
FontPath "unix/:7100"
EndSection
# Module loading section
Section "Module"
Load "dbe" # Double-buffering
Load "GLcore" # OpenGL support
Load "dri" # Direct rendering infrastructure
Load "glx" # OpenGL X protocol interface
Load "extmod" # Misc. required extensions
Load "v4l" # Video4Linux
# Load "pex5" # PHIGS for X 3D environment (obsolete)
# Load "record" # X event recorder
# Load "xie" # X Image Extension (obsolete)
# You only need the following two modules if you do not use xfs.
# Load "freetype" # TrueType font handler
# Load "type1" # Adobe Type 1 font handler
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Device" "/dev/mouse"
Option "Protocol" "IntelliMouse"
Option "Emulate3Buttons" "off"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "CustomConfiguration"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30-50
VertRefresh 47-110
# Option "dpms"
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync
EndSection
Section "Device"
Identifier "S3 Trio3D"
Driver "s3virge"
# BoardName "Unknown"
ChipSet "86C365"
# Option "pci_burst" "on"
# Option "pci_retry" "on"
EndSection
Section "Device"
Identifier "Linux Frame Buffer"
Driver "fbdev"
BoardName "Unknown"
EndSection
Section "Screen"
Identifier "Screen0"
Device "S3 Trio3D"
Monitor "CustomConfiguration"
DefaultDepth 16
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
# Subsection "Display"
# Depth 8
# Modes "1024x768" "800x600" "640x480"
# EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-3) / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.7-0.13.1smp i686 [ELF]
Build Host: stripples.devel.redhat.com
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Jun 4 10:29:08 2003
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "CustomConfiguration"
(**) | |-->Device "S3 Trio3D"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "unix/:7100"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 5
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.4
XFree86 XInput driver : 0.2
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80000060, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0598 card 0000,0000 rev 04 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,8598 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1106,0586 card 1106,0000 rev 47 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 1106,0571 card 0000,0000 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:07:3: chip 1106,3040 card 0000,0000 rev 10 class 06,00,00 hdr 00
(II) PCI: 00:08:0: chip 4005,4000 card 4005,4000 rev 00 class 04,01,00 hdr 00
(II) PCI: 00:09:0: chip 14f1,2014 card 144f,102a rev 01 class 07,80,00 hdr 00
(II) PCI: 01:00:0: chip 5333,8904 card 5333,8904 rev 01 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) Host-to-PCI bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[1] -1 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[2] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[3] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
(II) Bus 1 prefetchable memory range:
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(II) Bus -1: bridge is at (0:0:0), (-1,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(1:0:0) S3 Trio3D rev 1, Mem @ 0xe0000000/26
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xe9000000 - 0xe900ffff (0x10000) MX[B]
[1] -1 0xe8000000 - 0xe8ffffff (0x1000000) MX[B]
[2] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
[3] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[4] -1 0x0000e800 - 0x0000e87f (0x80) IX[B]
[5] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xe9000000 - 0xe900ffff (0x10000) MX[B]
[1] -1 0xe8000000 - 0xe8ffffff (0x1000000) MX[B]
[2] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
[3] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[4] -1 0x0000e800 - 0x0000e87f (0x80) IX[B]
[5] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xe9000000 - 0xe900ffff (0x10000) MX[B]
[6] -1 0xe8000000 - 0xe8ffffff (0x1000000) MX[B]
[7] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
[8] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[9] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[10] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[11] -1 0x0000e800 - 0x0000e87f (0x80) IX[B]
[12] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.0.1
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "s3virge"
(II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o
(II) Module s3virge: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.6.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.2
(II) v4l driver for Video4Linux
S3VIdentify
(II) S3VIRGE: driver (version 1.6.0) for S3 ViRGE chipsets: virge, 86C325,
virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2,
86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365,
trio 3d/2x, 86C362, 86C368
(II) Primary Device is: PCI 01:00:0
S3VProbe begin
(--) Assigning device section with no busID to primary device
(**) Chipset override: 86C365
(**) Chipset trio 3d found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xe9000000 - 0xe900ffff (0x10000) MX[B]
[6] -1 0xe8000000 - 0xe8ffffff (0x1000000) MX[B]
[7] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
[8] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[9] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[10] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[11] -1 0x0000e800 - 0x0000e87f (0x80) IX[B]
[12] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
S3VProbe end
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xe9000000 - 0xe900ffff (0x10000) MX[B]
[6] -1 0xe8000000 - 0xe8ffffff (0x1000000) MX[B]
[7] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
[8] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[9] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[10] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[11] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[14] -1 0x0000e800 - 0x0000e87f (0x80) IX[B]
[15] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
[16] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[17] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
S3VPreInit 1
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(**) S3VIRGE(0): Depth 16, (--) framebuffer bpp 16
(==) S3VIRGE(0): RGB weight 565
(==) S3VIRGE(0): Default visual is TrueColor
S3VGetRec
(==) S3VIRGE(0): Using HW Cursor
(==) S3VIRGE(0): Using fb.
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) S3VIRGE(0): initializing int10
(II) S3VIRGE(0): Primary V_BIOS segment is: 0xc000
(II) S3VIRGE(0): VESA BIOS detected
(II) S3VIRGE(0): VESA VBE Version 2.0
(II) S3VIRGE(0): VESA VBE Total Mem: 4096 kB
(II) S3VIRGE(0): VESA VBE OEM: S3 Incorporated Trio3D.
(II) S3VIRGE(0): VESA VBE OEM Software Rev: 1.1
(II) S3VIRGE(0): VESA VBE OEM Vendor: S3 Incorporated.
(II) S3VIRGE(0): VESA VBE OEM Product: Trio3D
(II) S3VIRGE(0): VESA VBE OEM Product Rev: Rev B
(**) S3VIRGE(0): Chipset: "86C365"
S3VMapMem
(WW) System lacks support for changing MTRRs
S3VEnableMmio
S3VPreInit vgaCRIndex=3d4, vgaIOBase=3d0, MMIOBase=4027c000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) S3VIRGE(0): VESA VBE DDC supported
(II) S3VIRGE(0): VESA VBE DDC Level 2
(II) S3VIRGE(0): VESA VBE DDC transfer in appr. 1 sec.
(II) S3VIRGE(0): VESA VBE DDC read successfully
(II) S3VIRGE(0): Manufacturer: LKM Model: fbf Serial#: 202
(II) S3VIRGE(0): Year: 1999 Week: 11
(II) S3VIRGE(0): EDID Version: 1.1
(II) S3VIRGE(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) S3VIRGE(0): Sync: Separate Composite
(II) S3VIRGE(0): Max H-Image Size [cm]: horiz.: 27 vert.: 20
(II) S3VIRGE(0): Gamma: 2.50
(II) S3VIRGE(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) S3VIRGE(0): redX: 0.610 redY: 0.350 greenX: 0.307 greenY: 0.595
(II) S3VIRGE(0): blueX: 0.150 blueY: 0.065 whiteX: 0.281 whiteY: 0.311
(II) S3VIRGE(0): Supported VESA Video Modes:
(II) S3VIRGE(0): [EMAIL PROTECTED]
(II) S3VIRGE(0): [EMAIL PROTECTED]
(II) S3VIRGE(0): [EMAIL PROTECTED]
(II) S3VIRGE(0): [EMAIL PROTECTED]
(II) S3VIRGE(0): [EMAIL PROTECTED]
(II) S3VIRGE(0): [EMAIL PROTECTED] (interlaced)
(II) S3VIRGE(0): [EMAIL PROTECTED]
(II) S3VIRGE(0): Manufacturer's mask: 0
(II) S3VIRGE(0): Supported additional Video Mode:
(II) S3VIRGE(0): clock: 25.2 MHz Image Size: 260 x 195 mm
(II) S3VIRGE(0): h_active: 640 h_sync: 656 h_sync_end 751 h_blank_end 800 h_border: 0
(II) S3VIRGE(0): v_active: 350 v_sync: 388 v_sync_end 390 v_blanking: 448 v_border: 0
(II) S3VIRGE(0): Supported additional Video Mode:
(II) S3VIRGE(0): clock: 25.2 MHz Image Size: 260 x 195 mm
(II) S3VIRGE(0): h_active: 640 h_sync: 656 h_sync_end 751 h_blank_end 800 h_border: 0
(II) S3VIRGE(0): v_active: 400 v_sync: 413 v_sync_end 415 v_blanking: 448 v_border: 0
(II) S3VIRGE(0): Ranges: V min: 47 V max: 104 Hz, H min: 30 H max: 65 kHz, PixClock max 110 MHz
(II) S3VIRGE(0): AZALEA V1.00
(==) S3VIRGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) S3VIRGE(0): videoram: 4096k
(--) S3VIRGE(0): Detected current MCLK value of 100.227 MHz
S3VDisableMmio
S3VPreInit minClock=20000, maxClock=270000
(II) S3VIRGE(0): CustomConfiguration: Using hsync range of 30.00-50.00 kHz
(II) S3VIRGE(0): CustomConfiguration: Using vrefresh range of 47.00-110.00 Hz
(II) S3VIRGE(0): Clock range: 20.00 to 270.00 MHz
(II) S3VIRGE(0): Not using default mode "1152x864" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1280x960" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1280x960" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1400x1050" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1400x1050" (hsync out of range)
(--) S3VIRGE(0): Virtual size is 1024x768 (pitch 1024)
(**) S3VIRGE(0): Mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) S3VIRGE(0): Modeline "1024x768" 65.00 1024 1032 1176 1344 768 771 777 806 -hsync -vsync
(**) S3VIRGE(0): Mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) S3VIRGE(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) S3VIRGE(0): Mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) S3VIRGE(0): Modeline "640x480" 25.18 640 664 760 800 480 491 493 525 (null)
(--) S3VIRGE(0): Display dimensions: (27, 20) cm
(--) S3VIRGE(0): DPI set to (96, 97)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xe0000000 - 0xe3ffffff (0x4000000) MS[B]
[1] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[2] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0xe9000000 - 0xe900ffff (0x10000) MX[B]
[7] -1 0xe8000000 - 0xe8ffffff (0x1000000) MX[B]
[8] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B)
[9] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[10] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[11] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[15] -1 0x0000e800 - 0x0000e87f (0x80) IX[B]
[16] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
[17] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[18] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
S3VScreenInit
S3VMapMem
S3VEnableMmio
S3VSave
(II) S3VIRGE(0): MMPR regs: 00000100 00000100 00000100 00000100
ViRGE driver: saved current video mode. Register dump:
(II) S3VIRGE(0): START register dump ------------------
Misc Out[3CC]
67
CR[00-2f]
5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 3f ff
9c 8e 8f 28 1f 96 b9 a3 ff ff ff ff ff ff ff ff
ff 00 00 00 00 00 00 00 00 00 00 00 00 89 04 01
SR[00-27]
03 00 03 00 02 05 06 07 06 00 c0 00 0c 00 00 00
21 28 61 28 00 03 06 a1 40 00 2f 02 02 00 1e 1f
00 02 82 5b 00 00 26 27
Gr Cont GR[00-0f]
00 00 00 00 00 10 0e 00 ff f9 fa fb fc fd fe ff
Att Cont AR[00-1f]
20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
0c 00 0f 08 00 35 36 37 0c 00 0f 08 00 3d 3e 3f
CR[30-6f]
e1 05 40 00 00 00 57 0b 4b ad 01 00 10 12 1c 00
01 08 00 00 00 00 02 ff f8 7f ff ff fe fa df ff
00 00 80 08 00 00 00 00 83 e0 00 00 03 00 00 00
30 10 10 00 00 04 88 00 81 80 80 09 07 00 c6 17
(II) S3VIRGE(0): END register dump --------------------
S3VModeInit
S3VModeInit dclk=65000
S3VWriteMode
Trio3D -- Display is on...turning off
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f80
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20007f80
Trio3D -- GE was on ST#1: 0x20007f80 ST#2: 0x20007f80
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f80
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20015f80
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f80
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20015f80
(II) S3VIRGE(0): ViRGE driver: done restoring mode, dumping CR registers:
(II) S3VIRGE(0): START register dump ------------------
Misc Out[3CC]
ef
CR[00-2f]
4b ff 7f 87 02 86 24 f5 00 60 00 00 00 00 00 00
03 29 ff 00 00 ff 24 c3 ff ff ff ff ff ff ff ff
ff 00 00 00 00 00 00 00 00 00 00 00 00 89 04 01
SR[00-27]
03 01 0f 00 0e 05 06 07 06 00 c0 00 0c 00 00 00
21 28 44 6b 00 03 06 a1 00 00 2f 02 02 00 1e 1f
00 02 82 5b 00 00 26 27
Gr Cont GR[00-0f]
00 00 00 00 00 40 05 0f ff f9 fa fb fc fd fe ff
Att Cont AR[00-1f]
60 61 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f
41 00 0f 00 00 35 36 37 41 00 0f 00 00 3d 3e 3f
CR[30-6f]
e1 0c 40 20 10 00 57 0b 4b ad 91 27 a5 a3 1c 00
01 08 00 00 00 00 02 ff f8 7f ff ff fe fa df ff
00 10 80 08 00 10 00 00 93 e0 00 00 03 75 40 00
30 10 10 00 00 10 99 50 81 80 80 09 07 00 c6 17
(II) S3VIRGE(0): END register dump --------------------
(**) S3VIRGE(0): Using FB
(II) S3VIRGE(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
10 256x256 slots
(==) S3VIRGE(0): Backing store disabled
(==) S3VIRGE(0): Silken mouse enabled
S3VDGAInit
S3VDGAInit firstone vpWid=1024, vpHgt=768, Bpp=2, mdbitsPP=16
S3VDGAInit firstone vpWid=800, vpHgt=600, Bpp=2, mdbitsPP=16
S3VDGAInit firstone vpWid=640, vpHgt=480, Bpp=2, mdbitsPP=16
S3VHWCursorInit
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(**) Option "Protocol" "IntelliMouse"
(**) Mouse0: Protocol: "IntelliMouse"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Option "BaudRate" "1200"
(**) Option "StopBits" "1"
(**) Option "DataBits" "7"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "0"
(**) Option "FlowControl" "None"
(==) Mouse0: Buttons: 3
(**) Option "Emulate3Buttons" "off"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: BaudRate: 1200
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Option "BaudRate" "1200"
GetModeLine - scrn: 0 clock: 65000
GetModeLine - hdsp: 1024 hbeg: 1032 hend: 1176 httl: 1344
vdsp: 768 vbeg: 771 vend: 777 vttl: 806 flags: 10
GetModeLine - scrn: 0 clock: 65000
GetModeLine - hdsp: 1024 hbeg: 1032 hend: 1176 httl: 1344
vdsp: 768 vbeg: 771 vend: 777 vttl: 806 flags: 10
GetModeLine - scrn: 0 clock: 65000
GetModeLine - hdsp: 1024 hbeg: 1032 hend: 1176 httl: 1344
vdsp: 768 vbeg: 771 vend: 777 vttl: 806 flags: 10
SwitchToMode - scrn: 0 clock: 25175
hdsp: 640 hbeg: 664 hend: 760 httl: 800
vdsp: 480 vbeg: 491 vend: 493 vttl: 525 flags: 0
Checking against clock: 65000 (65000)
hdsp: 1024 hbeg: 1032 hend: 1176 httl: 1344
vdsp: 768 vbeg: 771 vend: 777 vttl: 806 flags: 10
Checking against clock: 40000 (40000)
hdsp: 800 hbeg: 840 hend: 968 httl: 1056
vdsp: 600 vbeg: 601 vend: 605 vttl: 628 flags: 5
Checking against clock: 25175 (25175)
hdsp: 640 hbeg: 664 hend: 760 httl: 800
vdsp: 480 vbeg: 491 vend: 493 vttl: 525 flags: 0
S3VModeInit
S3VModeInit dclk=25175
S3VWriteMode
Trio3D -- Display is on...turning off
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f80
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20007f80
Trio3D -- GE was on ST#1: 0x20007f80 ST#2: 0x20007f80
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x39007f80
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x39915f80
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f80
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x1f815f80
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f80
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x1f815f80
Trio3D -- GE was on ST#1: 0x20007f80 ST#2: 0x20007f80
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x34007f80
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x33815f80
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f80
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20007f80
(II) S3VIRGE(0): ViRGE driver: done restoring mode, dumping CR registers:
(II) S3VIRGE(0): START register dump ------------------
Misc Out[3CC]
ef
CR[00-2f]
c3 9f 4f 83 a6 9e 0b 3e 00 40 00 00 00 00 00 00
eb 2d df 00 00 df 0b c3 ff ff ff ff ff ff ff ff
ff 00 00 00 00 00 00 00 00 00 00 00 00 89 04 01
SR[00-27]
03 01 0f 00 0e 05 06 07 06 00 c0 00 0c 00 00 00
21 28 82 6f 00 03 06 a1 00 00 2f 02 02 00 1e 1f
00 02 82 5b 00 00 26 27
Gr Cont GR[00-0f]
00 00 00 00 00 40 05 0f ff f9 fa fb fc fd fe ff
Att Cont AR[00-1f]
60 61 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f
41 00 0f 00 00 35 36 37 41 00 0f 00 00 3d 3e 3f
CR[30-6f]
e1 0c 40 20 10 00 57 0b 4b ad 91 b5 61 64 94 00
01 08 00 00 00 00 00 00 00 00 00 ff ff ff c0 c0
00 10 80 08 00 10 00 00 93 e0 00 00 03 00 40 00
30 10 10 00 00 10 99 50 81 80 80 09 07 00 c6 17
(II) S3VIRGE(0): END register dump --------------------
SwitchToMode - Succeeded
GetModeLine - scrn: 0 clock: 25175
GetModeLine - hdsp: 640 hbeg: 664 hend: 760 httl: 800
vdsp: 480 vbeg: 491 vend: 493 vttl: 525 flags: 0
XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-3) / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.7-0.13.1smp i686 [ELF]
Build Host: stripples.devel.redhat.com
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Jun 4 10:29:08 2003
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "CustomConfiguration"
(**) | |-->Device "S3 Trio3D"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) XKB: layout: "us"
(**) FontPath set to "unix/:7100"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 5
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(1:0:0) S3 Trio3D rev 1, Mem @ 0xe0000000/26
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.0.1
(II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o
(II) Module s3virge: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.6.0
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) v4l driver for Video4Linux
(II) S3VIRGE: driver (version 1.6.0) for S3 ViRGE chipsets: virge, 86C325,
virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2,
86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365,
trio 3d/2x, 86C362, 86C368
(--) Assigning device section with no busID to primary device
(**) Chipset override: 86C365
(**) Chipset trio 3d found
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(**) S3VIRGE(0): Depth 16, (--) framebuffer bpp 16
(==) S3VIRGE(0): RGB weight 565
(==) S3VIRGE(0): Default visual is TrueColor
(==) S3VIRGE(0): Using HW Cursor
(==) S3VIRGE(0): Using fb.
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) S3VIRGE(0): initializing int10
(II) S3VIRGE(0): Primary V_BIOS segment is: 0xc000
(II) S3VIRGE(0): VESA BIOS detected
(**) S3VIRGE(0): Chipset: "86C365"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) S3VIRGE(0): VESA VBE DDC supported
(II) S3VIRGE(0): Manufacturer: LKM Model: fbf Serial#: 202
(II) S3VIRGE(0): Year: 1999 Week: 11
(II) S3VIRGE(0): EDID Version: 1.1
(II) S3VIRGE(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) S3VIRGE(0): Sync: Separate Composite
(II) S3VIRGE(0): Max H-Image Size [cm]: horiz.: 27 vert.: 20
(II) S3VIRGE(0): Gamma: 2.50
(II) S3VIRGE(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) S3VIRGE(0): redX: 0.610 redY: 0.350 greenX: 0.307 greenY: 0.595
(II) S3VIRGE(0): blueX: 0.150 blueY: 0.065 whiteX: 0.281 whiteY: 0.311
(II) S3VIRGE(0): Supported VESA Video Modes:
(II) S3VIRGE(0): [EMAIL PROTECTED]
(II) S3VIRGE(0): [EMAIL PROTECTED]
(II) S3VIRGE(0): [EMAIL PROTECTED]
(II) S3VIRGE(0): [EMAIL PROTECTED]
(II) S3VIRGE(0): [EMAIL PROTECTED]
(II) S3VIRGE(0): [EMAIL PROTECTED] (interlaced)
(II) S3VIRGE(0): [EMAIL PROTECTED]
(II) S3VIRGE(0): Manufacturer's mask: 0
(II) S3VIRGE(0): Supported additional Video Mode:
(II) S3VIRGE(0): clock: 25.2 MHz Image Size: 260 x 195 mm
(II) S3VIRGE(0): h_active: 640 h_sync: 656 h_sync_end 751 h_blank_end 800
h_border: 0
(II) S3VIRGE(0): v_active: 350 v_sync: 388 v_sync_end 390 v_blanking: 448
v_border: 0
(II) S3VIRGE(0): Supported additional Video Mode:
(II) S3VIRGE(0): clock: 25.2 MHz Image Size: 260 x 195 mm
(II) S3VIRGE(0): h_active: 640 h_sync: 656 h_sync_end 751 h_blank_end 800
h_border: 0
(II) S3VIRGE(0): v_active: 400 v_sync: 413 v_sync_end 415 v_blanking: 448
v_border: 0
(II) S3VIRGE(0): Ranges: V min: 47 V max: 104 Hz, H min: 30 H max: 65 kHz,
PixClock max 110 MHz
(II) S3VIRGE(0): AZALEA V1.00
(==) S3VIRGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) S3VIRGE(0): videoram: 4096k
(--) S3VIRGE(0): Detected current MCLK value of 100.227 MHz
(II) S3VIRGE(0): CustomConfiguration: Using hsync range of 30.00-50.00 kHz
(II) S3VIRGE(0): CustomConfiguration: Using vrefresh range of 47.00-110.00 Hz
(II) S3VIRGE(0): Clock range: 20.00 to 270.00 MHz
(II) S3VIRGE(0): Not using default mode "1152x864" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1280x960" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1280x960" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of
range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of
range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of
range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of
range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of
range)
(II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory for
mode)
(II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory for
mode)
(II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory for
mode)
(II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory for
mode)
(II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) S3VIRGE(0): Not using default mode "1400x1050" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1400x1050" (hsync out of range)
(--) S3VIRGE(0): Virtual size is 1024x768 (pitch 1024)
(**) S3VIRGE(0): Mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(**) S3VIRGE(0): Mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(**) S3VIRGE(0): Mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(--) S3VIRGE(0): Display dimensions: (27, 20) cm
(--) S3VIRGE(0): DPI set to (96, 97)
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
Trio3D -- Display is on...turning off
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f80
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20007f80
Trio3D -- GE was on ST#1: 0x20007f80 ST#2: 0x20007f80
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f80
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20015f80
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f80
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20015f80
(**) S3VIRGE(0): Using FB
(II) S3VIRGE(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
10 256x256 slots
(==) S3VIRGE(0): Backing store disabled
(==) S3VIRGE(0): Silken mouse enabled
(**) Mouse0: Protocol: "IntelliMouse"
(**) Mouse0: Core Pointer
(==) Mouse0: Buttons: 3
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: BaudRate: 1200
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
XIM DEBUG: DCOPServer up and running.
GetModeLine - scrn: 0 clock: 65000
GetModeLine - hdsp: 1024 hbeg: 1032 hend: 1176 httl: 1344
vdsp: 768 vbeg: 771 vend: 777 vttl: 806 flags: 10
GetModeLine - scrn: 0 clock: 65000
GetModeLine - hdsp: 1024 hbeg: 1032 hend: 1176 httl: 1344
vdsp: 768 vbeg: 771 vend: 777 vttl: 806 flags: 10
GetModeLine - scrn: 0 clock: 65000
GetModeLine - hdsp: 1024 hbeg: 1032 hend: 1176 httl: 1344
vdsp: 768 vbeg: 771 vend: 777 vttl: 806 flags: 10
SwitchToMode - scrn: 0 clock: 25175
hdsp: 640 hbeg: 664 hend: 760 httl: 800
vdsp: 480 vbeg: 491 vend: 493 vttl: 525 flags: 0
Checking against clock: 65000 (65000)
hdsp: 1024 hbeg: 1032 hend: 1176 httl: 1344
vdsp: 768 vbeg: 771 vend: 777 vttl: 806 flags: 10
Checking against clock: 40000 (40000)
hdsp: 800 hbeg: 840 hend: 968 httl: 1056
vdsp: 600 vbeg: 601 vend: 605 vttl: 628 flags: 5
Checking against clock: 25175 (25175)
hdsp: 640 hbeg: 664 hend: 760 httl: 800
vdsp: 480 vbeg: 491 vend: 493 vttl: 525 flags: 0
Trio3D -- Display is on...turning off
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f80
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20007f80
Trio3D -- GE was on ST#1: 0x20007f80 ST#2: 0x20007f80
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x39007f80
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x39915f80
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f80
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x1f815f80
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f80
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x1f815f80
Trio3D -- GE was on ST#1: 0x20007f80 ST#2: 0x20007f80
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x34007f80
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x33815f80
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f80
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20007f80
SwitchToMode - Succeeded
GetModeLine - scrn: 0 clock: 25175
GetModeLine - hdsp: 640 hbeg: 664 hend: 760 httl: 800
vdsp: 480 vbeg: 491 vend: 493 vttl: 525 flags: 0
