It is XFree86 v. 4.3,  all the rpm's end in i586.  Mandrake 9.1 requires at
least a Pentuim to run and I am using their install CD's so I assume that it
should be good to go.   I installed an older Trident video card and X was
able to configure, load and run correctly.

Have found that the Diamond Stealth II S220 uses the Rendition chipset, so
the software recognizing the card as a Rendition is okay.

I don't think I'll fight this one anymore.   A weekend on an obsolete video
card is enough.  Going to re-install the Trident and move on.  Although I
learned a little about the rpm process and got familiar with bash so it
really was a great benefit to me.  Been over twenty years since I worked on
unix.  Very refreshing as I have recently become ABM.

Thank you for taking a look at my problem.
Regards,
Jim

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Behalf Of Andy Goth
Sent: Sunday, July 13, 2003 7:23 PM
To: [EMAIL PROTECTED]
Subject: Re: [XFree86] Problem Installing Mandrake 9.1 with a Diamond
Stealth II S200 Video card


On Sunday, July 13, 2003 1:50 pm, Jim Strzyzewski wrote:
> I am a newbee working on learning Linux.  Purchased the 9.1 release of
> Mandrake from Ebay.
>
> The machine is:
> Pentium II  450 MHZ
>
> The install went smooth until the configuration for the graphics card.  No
> matter how I twiddled with the parameters I kept on getting the "Caught
> Signal 4."  error message.   Also, the software seemed to want to
configure
> the video card as a Rendition video card.  So I just continued with the
> installation.  When I log on I use the bash shell.

>From SIGNAL(7) (type "man 7 signal" to read the whole thing):

       SIGILL        4        C      Illegal Instruction

What processor is your X server compiled for?

--
Andy Goth  |  [EMAIL PROTECTED]  |  http://ioioio.net/
End communication.


_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

Reply via email to