On Fri, 26 Sep 2003 [EMAIL PROTECTED] wrote:
>
> Hello,
>
> I have had problems using Red Hat 9 with a LG Flatron monitor. After
> installing RH9, the following message is shown:
>
> "Impossible to execute X server".
>
> I can use the graphical interface but with low resolution (800 x 600).
> Besides that, my Genius Netscroll+ mouse also presents a problem because I
> can not see the arrow. Here is the configuration:
You can't use more than 800x600 because you've specified your
monitor specifications as one of a simple vga monitor.
(II) NV(0): Monitor0: Using hsync range of 31.50-37.90 kHz
(II) NV(0): Monitor0: Using vrefresh range of 50.00-70.00 Hz
According to information I see on the web your Monitor section
in the XF86Config should have
HorizSync 30 - 96
VertRefresh 50 - 160
I don't know about the missing cursor. I've heard one other
report on that on nForce, but I've not reproduced it myself. You
should be able to get it back with
Option "SWCursor"
in the Section "Device" of the XF86Config.
Mark.
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
